Porous titanium–silver dental implants fabricated via SPS: Poly-caprolactone coating and bioevaluation
Source abstract
Abstract
Abstract Titanium implants are among the most widely used implants in dentistry; however, their use is associated with difficulties. Among the challenges in the construction and application of these implants, three important ones are considered in this study: (1) reducing construction temperature and time, (2) decreasing infection rate after implant loading, and (3) eliminating stress shielding. The first stage is making pieces of Ti–1 wt% Ag by spark plasma sintering at 850 and 900°C and pressure of 10 and 30 MPa. In the second stage, by sol–gel and immersion, poly-caprolactone was placed on the surface. For characterization, porosity, hardness, compressive strength, corrosion, and wettability were evaluated, and X-ray diffraction (XRD), scanning electron microscope (SEM), Fourier-transform infrared, field emission scanning electron microscopy, antibacterial test, and MTT were performed. XRD results indicated that the addition of 1% Ag to Ti did not change the crystalline phase. Also, Ag is completely dissolved in the structure of Ti and forms a substitutional solid solution. SEM results showed that samples made at 850°C and 10 MPa had 20–25% porosity. The average size of porosities is 5 μm with a morphology similar to interconnected spheres. Hardness and compressive tests showed that the best manufacturing conditions were 850°C and 10 MPa. After etching and coating, the samples have the highest wettability rate. Results of electrochemical tests showed that the corrosion potential of Ti–1 wt% Ag with coating is higher than the uncoated structure. In the cytotoxicity test, cell viability was improved by coating. Antibacterial test indicates that the coated sample is able to kill bacteria.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Bone Tissue Engineering Materials · Dental Implant Techniques and Outcomes · Dental materials and restorations
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Metallurgy and Materials Engineering, Iran University of Science and Technology , Tehran , Iran
Ceramic Group, School of Metallurgy and Materials Engineering, Iran University of Science and Technology , Tehran , Iran
School of Metallurgy and Materials Engineering, Iran University of Science and Technology , Tehran , Iran
Industrial Metallurgy group, School of Metallurgy and Materials Engineering, Iran University of Science and Technology , Tehran , Iran
References (49)
Show source-provided references
1. Varanasi, V.G., Velten, M.F., Odatsu, T., Ilyas, A., Surface modifications and surface characterization of biomaterials used in bone healing, materials and devices for bone disorders, Academic Press, Massachusetts, USA, 2017, pp. 405–45210.1016/B978-0-12-802792-9.00009-4 ↗
2. Karageorgiou, V., Kaplan, D., Porosity of 3D biomaterial scaffolds and osteogenesis, Biomaterials, 2005, 26: 5474–5491. 10.1016/j.biomaterials.2005.02.00210.1016/j.biomaterials.2005.02.002 ↗
3. Arifin, A., Sulong, A.B., Muhamad, N., Syarif, J., Material processing of hydroxyapatite and titanium alloy (HA/Ti) composite as implant materials using powder metallurgy: A review, Mater. Des., 2014, 55: 165–175. 10.1016/j.matdes.2013.09.04510.1016/j.matdes.2013.09.045 ↗
4. Kayabas, O., Yuzbasıoglu, E., Erzincanl, F., Static, dynamic and fatigue behaviors of dental implant using finite element method, Adv. Eng. Softw., 2006, 37: 649–658. 10.1016/j.advengsoft.2006.02.00410.1016/j.advengsoft.2006.02.004 ↗
5. Wang, X., Wang, Y., Zhang, T., Liu, X., Flash joining of C/C composite with Ag-Cu-Ti filler by spark plasma sintering: The promoting and inhibiting effects on the interfacial reactions, Ceram. Int., 2025, 51: 10169–10173. 10.1016/j.ceramint.2024.12.44710.1016/j.ceramint.2024.12.447 ↗
6. Ehsani, N., Abdulahi, A., Sintering of powder metallurgy parts using plasma arc (SPS), Iran. J. Man. Eng., 2012, 46: 35–43
7. Ayodele, O.O., Shongwe, M.B., Obadele, B.A., Olubambi, P., Spark plasma sintering of materials: advances in processing and applications, Part VIII, Spark Plasma Sintering of Titanium-Based Materials, Spark Plasma Sintering of Materials, Springer Nature, Switzerland, 2019, pp. 673–70110.1007/978-3-030-05327-7_23 ↗
8. Falodun, O.E., Obadele, B.A., Oke, S.R., Ige, O., Olubambi, P., Lethabane, L., et al., Influence of spark plasma sintering on microstructure and wear behaviour of Ti-6Al-4V reinforced with nanosized TiN, Trans. Nonferrous Met. Soc. China, 2018, 28: 47–54. 10.1016/S1003-6326(18)64637-010.1016/S1003-6326(18)64637-0 ↗
9. Shi, M., Liu, S., Wang, Q., Yang, X., Zhang, G., Preparation and properties of titanium obtained by spark plasma sintering of a Ti powder–fiber mixture, Materials, 2018, 11: 1–10. 10.3390/ma1112251010.3390/ma11122510 ↗
10. Cordeiro, M.J., Barão, V.A., Is there scientific evidence favoring the substitution of commercially pure titanium with titanium alloys for the manufacture of dental implants?, Mater. Sci. Eng. C., 2017, 71: 1201–1215. 10.1016/j.msec.2016.10.02510.1016/j.msec.2016.10.025 ↗
11. Grandin, H.M., Berner, S., Dard, M., A review of titanium zirconium (tizr) alloys for use in endosseous dental implants, Materials, 2012;5: 1348–1360. 10.3390/ma508134810.3390/ma5081348 ↗
12. Medvedev, E., Molotnikov, A., Lapovok, R., Zeller, R., Berner, S., Habersetzer, P., et al., Microstructure and mechanical properties of Ti-15Zr alloy used as dental implant material, Mech. Behav. Biomed. Mater., 2016, 62: 384–398. 10.1016/j.jmbbm.2016.05.00810.1016/j.jmbbm.2016.05.008 ↗
13. Basalah, A., Esmaeili, S., Toyserkani, E., On the influence of sintering protocols and layer thickness on the physical and mechanical properties of additive manufactured titanium porous bio-structures, Mater. Process. Technol., 2016, 238: 341–351. 10.1016/j.jmatprotec.2016.07.03710.1016/j.jmatprotec.2016.07.037 ↗
14. Oh, I.H., Nomura, N., Masahashi, N., Hanada, S., Mechanical properties of porous titanium compacts prepared by powder sintering, Scr. Mater., 2003, 49: 1197–1202. 10.1016/j.scriptamat.2003.08.01810.1016/j.scriptamat.2003.08.018 ↗
15. Khushboo, K, Anju, T.R., Cintil, J.C., Amee, K., Strategic defenses: A review of novel approaches to combat nosocomial infections on medical implants, Int. J. Pharm., 2025, 681: 125827. 10.1016/j.ijpharm.2025.12582710.1016/j.ijpharm.2025.125827 ↗
16. Lei, Z., Zhang, H., Zhang, E., You, J., Ma, X., Bai, X., Antibacterial activities and biocompatibilities of Ti-Ag alloys prepared by spark plasma sintering and acid etching, Mater. Sci. Eng., 2018, 92: 121–131. 10.1016/j.msec.2018.06.02410.1016/j.msec.2018.06.024 ↗
17. Shi, Z., Neoh, K.G., Kang, E.T., Poh, C., Wang, W., Titanium with surface-grafted dextran and immobilized bone morphogenetic protein-2 for inhibition of bacterial adhesion and enhancement of osteoblast functions, Tissue Eng., 2009, 15: 417–426. 10.1089/ten.tea.2007.041510.1089/ten.tea.2007.0415 ↗
18. Hanawa, T., A comprehensive review of techniques for bio-functionalization of titanium, Periodontal Implant. Sci., 2011, 41: 263–272. 10.5051/jpis.2011.41.6.26310.5051/jpis.2011.41.6.263 ↗
19. Zhao, L., Chu, P.K., Zhang, Y., Wu Z., Antibacterial coatings on titanium implants, Biomed. Mater. Res. Part. B Appl. Biomater., 2009, 91: 470–480. 10.1002/jbm.b.3146310.1002/jbm.b.31463 ↗
20. Ntrivala, M.A., Pitsavas, A.C., Lazaridou, K., Baziakou, Z., Karavasili, D., Papadimitriou, M., et al., Polycaprolactone (PCL): the biodegradable polyester shaping the future of materials – a review on synthesis, properties, biodegradation, applications and future perspectives, Eur. Polym. J., 2025, 234: 114033. 10.1016/j.eurpolymj.2025.11403310.1016/j.eurpolymj.2025.114033 ↗
21. Sharma, H., Pathak, M., Development of PCL/TiO2 composite as an efficient antibacterial, anticancer drug and biocompatible properties, Results Chem., 2024, 7: 101534. 10.1016/j.rechem.2024.10153410.1016/j.rechem.2024.101534 ↗
22. Catauro, M., Papale, F., Bollino, F., Characterization and biological properties of TiO2/PCL hybrid layers prepared via sol–gel dip coating for surface modification of titanium implants, Non-Cryst Solids, 2015, 415: 9–15. 10.1016/j.jnoncrysol.2014.12.00810.1016/j.jnoncrysol.2014.12.008 ↗
23. De Santis, R., Catauro, M, Silvio, L.D., Manto, L., MG, Ambrosio, L., et al., Effects of polymer amount and processing conditions on the in vitro behaviour of hybrid titanium dioxide/polycaprolactone composites, Biomaterials, 2007, 28: 2801–2809. 10.1016/j.biomaterials.2007.02.01410.1016/j.biomaterials.2007.02.014 ↗
24. Chia, J.C., Lai, C.W., Juan, J.C., Kong, E.D.H., Teoh, M.W.Q., Kumar, A., et al., Recent development of copper, silver and their bimetallic nanoparticles: Next-generation antibacterial agents through photocatalysis activity, Water Process. Eng., 2025, 72: 107541. 10.1016/j.jwpe.2025.1075410.1016/j.jwpe.2025.107541 ↗
25. Wang, X., Dong, H., Liu, J., In vivo antibacterial property of Ti-Cu sintered alloy implant, Mater. Sci. Eng. C., 2019, 100: 38–47. 10.1016/j.msec.2019.02.08410.1016/j.msec.2019.02.084 ↗
26. Tao, S.C., Xu, J.L., Yuan, L., Luo, J.M., Microstructure, mechanical properties and antibacterial properties of the microwave sintered porous Ti-3Cu alloys, Alloy. Compd., 2020, 812: 152142. 10.1016/j.jallcom.2019.15214210.1016/j.jallcom.2019.152142 ↗
27. Feng, Y., Yang, F., Yuan, W., Hu, C., Chu, F., Wu, Y., et al., Lignin micro-nanospheres loaded with silver nanoparticles for excellent antibacterial activity, Int. J. Biol. Macromol., 2025, 319: 145374. 10.1016/j.ijbiomac.2025.14537410.1016/j.ijbiomac.2025.145374 ↗
28. Szaraniec, B., Goryczka, T., Structure and properties of Ti-Ag alloys produced by powder metallurgy, Alloy. Compd., 2017, 709: 464–472. 10.1016/j.jallcom.2017.03.15510.1016/j.jallcom.2017.03.155 ↗
29. Valenza, F., Artini, C., Passerone, A., Muolo, M.L., ZrB2–SiC/Ti6Al4V joints: wettability studies using Ag- and Cu-based braze alloys, Mater. Sci., 2012, 47: 8439–8449. 10.1007/s10853-012-6790-710.1007/s10853-012-6790-7 ↗
30. Oh, K.T., Shim, H.M., Kim, K.N., Properties of titanium–silver alloys for dental application, Biomed. Mater. Res., 2005, 74: 649–658. 10.1002/jbm.b.3025910.1002/jbm.b.30259 ↗
31. Kang, M.K., Moon, S.K., Kwon, J.S., Kim, K.M., Kim, K.N., Antibacterial effect of sand blasted, large-grit, acid-etched treated Ti–Ag alloys, Mater. Res. Bull., 2012, 47: 2952–2955. 10.1016/j.materresbull.2012.04.06010.1016/j.materresbull.2012.04.060 ↗
32. Chen, M., Zhang, E., Zhang, L., Microstructure, mechanical properties, bio-corrosion properties and antibacterial property of Ti-Ag sintered alloys, Mater. Sci. Eng. C., 2016, 62: 350–360. 10.1016/j.msec.2016.01.08110.1016/j.msec.2016.01.081 ↗
33. Shi, A., Zhu, C., Fu, S., Wang, R., Qin, G., Chen, D., et al., What controls the antibacterial activity of Ti-Ag alloy, Ag ion or Ti2Ag particles?, Mater. Sci. Eng., 2020, 109: 110548. 10.1016/j.msec.2019.11054810.1016/j.msec.2019.110548 ↗
34. Molitor, P., Barron, V., Young, T., Surface treatment of titanium for adhesive bonding to polymer composites: a review, Int. J. Adhes. Adhes., 2001, 21: 129–136. 10.1016/S0143-7496(00)00044-010.1016/S0143-7496(00)00044-0 ↗
35. Han, M.K., Hwang, M.J., Won, D.H., Kim, Y.S., Song, H.J., Park, Y.J., Massive transformation in titanium-silver alloys and its effect on their mechanical properties and corrosion behavior, Materials, 2014, 7: 6194–6206. 10.3390/ma709619410.3390/ma7096194 ↗
36. Zambrano Carrullo, J.C., Dalmau Borrás, A., Amigó Borrás, V., Navarro-Laboulais, J., Pereira Falcón, J.C., Electrochemical corrosion behavior and mechanical properties of Ti–Ag biomedical alloys obtained by two powder metallurgy processing routes, Mech. Behav. Biomed. Mater., 2020, 112: 104063. 10.1016/j.jmbbm.2020.10406310.1016/j.jmbbm.2020.104063 ↗
37. Fellah, B.H., Layrolle, P., Sol–gel synthesis and characterization of macroporous calcium phosphate bioceramics containing microporosity, Acta Biomater., 2009, 5: 735–742. 10.1016/j.actbio.2008.09.00510.1016/j.actbio.2008.09.005 ↗
38. Callister, W.D., Rethwisch, D.G., Materials science and engineering, an introduction. 9th ed., John Wiley and Sons Inc, New Jersey, USA, 2014. p. 196
39. Yang, Y.F., Qian, M., Spark plasma sintering and hot pressing of titanium and titanium alloys, Titan. Powder Metall. Sci. Technol. Appl., 2015, 13: 219–23510.1016/B978-0-12-800054-0.00013-7 ↗
40. Catauro, M., Bollino, F., Veronesi, P., Lamanna, G., Influence of PCL on mechanical properties and bioactivity of ZrO2-based hybrid coatings synthesized by sol–gel dip coating technique, Mater. Sci. Eng. C., 2014, 39: 344–351. 10.1016/j.msec.2014.03.02510.1016/j.msec.2014.03.025 ↗
41. Catauro, M., Bollino, F., Cristina Mozzati, M., Ferrara, C., Structure and magnetic properties of SiO2/PCL novel sol–gel organic–inorganic hybrid materials, J. Solid. State Chem., 2013, 203: 92–99. 10.1016/j.jssc.2013.04.01410.1016/j.jssc.2013.04.014 ↗
42. Griesser, H.J., Thin film coatings for biomaterials and biomedical applications. Woodhead Publishing Series in Biomaterials, Elsevier, Cambridge, United Kingdom, 2016
43. Al Khateeb, S., Bennett, B.T., Beck, J.P., Jeyapalina, S., Sparks, T.D., Exploration of fluorapatite bio-ceramic thin film deposition by ultrasonic spray pyrolysis, Mater. Res., 2023, 38: 2287–2301. 10.1557/s43578-023-00961-710.1557/s43578-023-00961-7 ↗
44. Al Khateeb, S., Alley, M.J., Beck, J.P., Jeyapalina, S., Sparks, T.D., Crystallinity evolution of spray pyrolyzed fluorapatite thin films by post-deposition treatment, Thin Solid. Films, 2023, 784: 140082. 10.1016/j.tsf.2023.14008210.1016/j.tsf.2023.140082 ↗
45. Elzein, T., Nasser-Eddine, M., Delaite, C., Bistac, S., Dumas, P., FTIR study of polycaprolactone chain organization at interfaces, Colloid Interface Sci., 2004, 27: 381–387. 10.1016/j.jcis.2004.02.00110.1016/j.jcis.2004.02.001 ↗
46. Rezaei, Y., Moztarzadeh, F., Shahabi, S., Tahriri, M.R., Synthesis, characterization, and in vitro bioactivity of sol-gel-derived SiO2-CaO-P2O5-MgO-SrO bioactive glass, Synth. React. Inorg. Met.-Org. Nano-Met. Chem., 2014, 14: 692–701. 10.1080/15533174.2013.78386910.1080/15533174.2013.783869 ↗
47. Xie, F., He, X., Cao, S., Mei, M., Influence of pore characteristics on microstructure, mechanical properties and corrosion resistance of selective laser sintered porous Ti–Mo alloys for biomedical applications, Electrochim. Acta, 2013, 105: 121–129. 10.1016/j.electacta.2013.04.10510.1016/j.electacta.2013.04.105 ↗
48. Zhang, Z., Yang, Y., Guo, Y., Xu, Z., Sha, P., Yu, Z., et al., The corrosion resistance and biomineralization of the DCPD-PCL coating on the surface of the additively manufactured NiTi alloy, Surf. Coat. Technol., 2023, 466: 129653. 10.1016/j.surfcoat.2023.12965310.1016/j.surfcoat.2023.129653 ↗
49. Bagheri, A., Sedighi, M., Shamsi, M., Effect of PCL/HA nanocomposite coating on the degradation rate and mechanical integrity of mg/ha biocomposites during exposure in SBF, Arab. J. Sci. Eng., 2024, 49: 2077–2094. 10.1007/s13369-023-08134-810.1007/s13369-023-08134-8 ↗