Metal copper induced the phase transition of MoO3 to MoO2 thin films for the CdTe solar cells
Source abstract
Abstract
Abstract Multilayered MoO3/Cu thin films were prepared by thermal evaporation in combination with the thermal treatments. As-deposited multilayers are amorphous structure. With the increase of temperature, Mo4O11 phase forms in the thin films without copper while MoO2 phase with the weak reduced molybdenum oxide appears in the copper-containing thin films. After annealing at the temperature higher than 450 °C predominant MoO2 appears in the multilayered MoO3/Cu thin films. Meanwhile, CuO and Cu2O are also present in the thin films. The formation mechanism of reduced molybdenum suboxide can be explained by the oxygen-vacancy generation reaction or the reduction of MoO3 to MoO3-x via the inter-diffusion at the MoO3/Cu interfaces. The band gaps and conductivity activation energies of multilayered MoO3/Cu thin films decrease as the annealing temperature increases, in which the smallest band gap of ~2.05 eV and activation energy of ~0.02 eV for the MoO2 thin films are found. Our results open a new road to broaden the application of reduced molybdenum suboxides as a back contact material for CdTe solar cells.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Copper-based nanomaterials and applications · Chalcogenide Semiconductor Thin Films · ZnO doping and properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (62)
Show source-provided references
1. Efficient, air‐stable bulk heterojunction polymer solar cells using MoOx as the anode interfacial layer10.1002/adma.201100038 ↗
2. Improvement of kesterite solar cell performance by solution synthesized MoO3 interfacial layer10.1002/pssa.201600534 ↗
3. Combinatorial investigation and modelling of MoO3 hole‐selective contact in TiO2| Co3O4| MoO3 all‐oxide solar cells10.1002/admi.201500405 ↗
4. Integrated perovskite/bulk-heterojunction toward efficient solar cells10.1021/nl504168q ↗
5. Copper doping of MoOx thin films for CdTe solar cells10.1016/j.mssp.2018.06.008 ↗
6. CdS/CdTe solar cells with MoOx as back contact buffers10.1063/1.3489414 ↗
7. The effect of MoOx inter-layer on thin film CdTe/CdS solar cell10.1016/j.solmat.2012.04.006 ↗
8. CdTe/CdS thin film solar cells grown in substrate configuration10.1002/pip.2233 ↗
9. A metallic molybdenum suboxide buffer layer for organic electronic devices10.1063/1.3432447 ↗
10. Epitaxial growth and metallicity of rutile MoO2 thin film10.1039/C6RA09928A ↗
11. High electrochemical performance and phase evolution of magnetron sputtered MoO2 thin films with hierarchical structure for Li-ion battery electrodes10.1039/C3TA14865C ↗
12. Formation of a faceted MoO2 epilayer on Mo (1 1 2) studied by XPS, UPS and STM10.1016/j.susc.2004.01.010 ↗
13. Effect of the substrate temperature on the structural and morphological properties of MoO2 thin films obtained by pulsed injection MOCVD10.20964/2017.05.51 ↗
14. Doping of polycrystalline CdTe for high-efficiency solar cells on flexible metal foil10.1038/ncomms3306 ↗
15. Cathodoluminescence of Cu diffusion in CdTe thin films for CdTe/CdS solar cells10.1063/1.1515119 ↗
16. The importance of back contact modification in Cu2ZnSnSe4 solar cells: the role of a thin MoO2 layer10.1016/j.nanoen.2016.06.034 ↗
17. Windowless CdSe/CdTe solar cells with differentiated back contacts: J-V, EQE, and photocurrent mapping10.1021/am503769a ↗
18. Polycrystalline CdSeTe/CdTe absorber cells with 28 mA/cm2 short-circuit current10.1109/JPHOTOV.2017.2775139 ↗
19. Incorporation of metal selenide thin films as the secondary absorber in the CdTe solar cells10.1016/j.jallcom.2020.154415 ↗
20. Time evolution to CdCl2 treatment on Cd-based solar cell devices fabricated by vapor evaporation10.1016/j.solener.2017.05.013 ↗
21. Copassivation of polycrystalline CdTe absorber by CuCl thin films for CdTe solar cells10.1016/j.apsusc.2019.03.253 ↗
22. Preparation of vanadium diselenide thin films and their application in CdTe solar cells10.1016/j.tsf.2013.10.032 ↗
23. Development of MoOx thin films as back contact buffer for CdTe solar cells in substrate configuration10.1016/j.tsf.2012.11.110 ↗
24. A structural study of RF-sputtered… Cu/Te… multi-layers10.1016/j.solmat.2005.10.009 ↗
25. Control of Cu doping and CdTe/Te interface modification for CdTe solar cells10.1016/j.mssp.2017.09.013 ↗
26. Bi2Te3 thin films prepared by co-evaporation for CdTe thin film solar cells10.1016/j.solmat.2013.10.039 ↗
27. Microstructural characterization of thin laser bonded coatings based on transitional metal oxides powder
28. Raman spectroscopy of molybdenum oxides - Part II. Resonance Raman spectroscopic characterization of the molybdenum oxides Mo4O11 and MoO210.1039/b107046k ↗
29. Laser deposition of molybdenum oxide thin films from organometallic precursors10.1557/PROC-187-167 ↗
30. Optical and electrical properties of transparent conductive ITO thin films deposited by sol–gel process10.1016/S0040-6090(00)01369-9 ↗
31. Micro-Raman study of the m-MoO2 to α-MoO3 transformation induced by cw-laser irradiation10.1016/j.optmat.2010.10.028 ↗
32. Ultrathin molybdenum dioxide nanosheets as uniform and reusable surface‐enhanced Raman spectroscopy substrates with high sensitivity10.1002/smll.201802276 ↗
33. Raman-scattering study of ion-implantation produced damage in Cu2O10.1103/PhysRevB.12.20 ↗
34. Raman spectra of CuO nanocrystals10.1002/(SICI)1097-4555(199905)30:5<413::AID-JRS387>3.0.CO;2-N ↗
35. Synthesis and characterization of flash-evaporated MoO3 thin-films10.1016/0022-0248(95)00269-3 ↗
36. Infrared and Raman spectra of MoO3 molybdenum trioxides and MoO3· xH2O molybdenum trioxide hydrates10.1016/0584-8539(94)00247-9 ↗
37. Largely enhanced electrochemical performance in MoO3-x nanobelts formed by a “sauna reaction”: importance of oxygen vacancies10.1016/j.electacta.2017.04.052 ↗
38. Facile synthesis of MoO2 nanoparticles as high performance supercapacitor electrodes and photocatalysts10.1016/j.ceramint.2015.10.008 ↗
39. One-step synthesis of centimeter-size alpha-MoO3 with single crystallinity10.1016/j.apsusc.2019.01.169 ↗
40. XPS study of as-prepared and reduced molybdenum oxides10.1016/0169-4332(95)00317-7 ↗
41. Transition metal oxide work functions: the influence of cation oxidation state and oxygen vacancies10.1002/adfm.201200615 ↗
42. MoO3 nanoflakes coupled reduced graphene oxide with enhanced ethanol sensing performance and mechanism10.1016/j.snb.2019.126730 ↗
43. Fast catalytic degradation of organic dye with air and MoO3: Ce nanofibers under room condition10.1016/j.apcatb.2009.08.012 ↗
44. Physical properties of copper oxide thin films prepared by dc reactive magnetron sputtering under different oxygen partial pressures10.1016/j.physb.2009.08.185 ↗
45. Cu/Cu2O/CuO nanoparticles: novel synthesis by exploding wire technique and extensive characterization10.1016/j.apsusc.2016.09.005 ↗
46. Optimization of photoelectrochemical performance in chemical bath deposited nanostructured CuO10.1016/j.jallcom.2016.11.374 ↗
47. Characterization of copper oxide thin films deposited by the thermal evaporation of cuprous oxide (Cu2O)10.1016/j.vacuum.2007.10.004 ↗
48. Cu2O/reduced graphene oxide composites for the photocatalytic conversion of CO210.1002/cssc.201301194 ↗
49. Corrosion inhibition by self-assembled monolayers for enhanced wire bonding on Cu surfaces10.1016/S0167-9317(03)00283-1 ↗
50. Oxidation of polycrystalline copper thin films at ambient conditions10.1021/jp076981k ↗
51. A low‐cost NiO hole transfer layer for ohmic back contact to Cu2O for photoelectrochemical water splitting10.1002/smll.201702007 ↗
52. Embedment of anodized p-type Cu2O thin films with CuO nanowires for improvement in photoelectrochemical stability10.1039/c3nr34012k ↗
53. Copper (I) Oxide (Cu2O) based back contact for p-i-n CdTe solar cells10.1002/pip.2782 ↗
54. CdTe thin film solar cells fabricated with CuO as a buffer layer in the back contact10.1109/JPHOTOV.2017.2689163 ↗
55. From MoO3 nanobelts to MoO2 nanorods: structure transformation and electrical transport10.1021/nn800844h ↗
56. High electrical conductivity of individual epitaxially grown MoO2 nanorods10.1063/1.5001183 ↗
57. Theoretical and experimental study of the electronic structures of MoO3 and MoO210.1021/jp9093172 ↗
58. Systematic study of oxygen vacancy tunable transport properties of few‐layer MoO3− x enabled by vapor‐based synthesis10.1002/adfm.201605380 ↗
59. The electrical properties of polycrystalline silicon films10.1063/1.321593 ↗
60. Strong magneto‐optical enhancement in highly Ce‐substituted iron garnet films by sputtering10.1063/1.349786 ↗
61. Tunable visible light absorption of MoO3-CdTe composite thin films10.1016/j.tsf.2017.05.032 ↗
62. Substrate temperature influenced structural, electrical and optical properties of dc magnetron sputtered MoO3 films10.1016/j.apsusc.2009.11.086 ↗