journal article·2015-12

Ultra-smooth BaTiO3 surface morphology using chemical mechanical polishing technique for high-k metal-insulator-metal capacitors

H.K. Sung, C. Wang, N.Y. Kim

Publisher page

Abstract

Abstract The surface roughness of barium titanate (BTO) following its implication by aerosol deposition method (ADM), is a very important characteristic affecting its potential for use in high-k metal-insulator-metal capacitors. The ADM is the best candidate to deposit ceramic films but has two major problems: macroscopic defects and rough interface effects on the BTO surface. In this work, a chemical mechanical polishing (CMP) technique is applied to obtain an ultra-smooth BTO surface morphology by the optimization of several factors including the slurry type, the head rotational speed, and the down pressure. Statistically, we were able to achieve a root mean square (RMS) value of the BTO surface of 1.746 nm by utilizing a two-step polishing process, applied at a head rotational speed of 70 rpm under 5 kg/cm2 of down pressure; this RMS value is improved at least 8 times over previous studies. This analysis is based on representative pattern images, three-dimensional images, line profiles, histograms, and power spectra of selected BTO surface areas, further verified with data from both energy-dispersive X-ray spectroscopy and X-ray photoelectron spectroscopy.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Semiconductor materials and devices · Advanced Surface Polishing Techniques · Copper Interconnects and Reliability

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (20)

Show source-provided references
1. Development and characterization of metal-insulator-metal capacitors with SiNx thin films by plasma-enhanced chemical vapor deposition10.1088/0256-307X/27/7/078101 ↗
2. Fabrication of metal-insulator-metal capacitors with SiNx thin films deposited by plasma-enhanced chemical vapor deposition10.4313/TEEM.2009.10.5.147 ↗
3. High-performance integrated passive technology by advanced Si-GaAs-based fabrication for RF and microwave applications10.1002/mop.25018 ↗
4. A novel method for the fabrication of integrated passive device on SI-GaAs substrate10.1007/s00170-010-2807-z ↗
5. High dielectric constant TiO2 thin films on a Ru electrode grown at 250°C by atomic-layer deposition10.1063/1.1812832 ↗
6. High performance organic transistors using small molecule semiconductors and high permittivity semiconducting polymers10.1002/adfm.201303336 ↗
7. Chemical mechanical polishing characteristics of barium titanate thin films using mixed abrasive slurry
8. Comparative analysis of barium titanate thin films by etching using inductively coupled plasmas by different fluorine-based mixture gas
9. Effect of sulfur hexafluoride gas and post-annealing treatment for inductively coupled plasma etched barium titanate thin films”
10. Effects of heat treatment on the dielectric properties of aerosol-deposited Al2O3-polymide composite thick films for room temperature fabrication
11. Relation between electrical properties of aerosol-deposited BaTiO3 thin films and their mechanical hardness measured by nano-indentation
12. Characterization of dielectric relaxation and reliability of high-k MIM capacitor under constant voltage stress10.5573/JSTS.2014.14.5.543 ↗
13. Chemical mechanical polishing of selective epitaxial grown germanium on silicon10.1149/2.003401jss ↗
14. Effects of pad properties on material removal in chemical mechanical polishing10.1016/j.jmatprotec.2006.11.216 ↗
15. Aerosol deposition of ceramic thick films at room temperature: densification mechanism of ceramic layers10.1111/j.1551-2916.2006.01030.x ↗
16. Room Temperature Impact Consolidation (RTIC) of fine ceramic powder by aerosol deposition method and applications to microdevices10.1007/s11666-008-9163-7 ↗
17. Ultra-smooth metal surfaces generated by pressure-induced surface deformation of thin metal films10.1007/s00339-006-3836-1 ↗
18. Ultra-smooth platinum surfaces for nanoscale devices fabricated using chemical mechanical polishing10.1007/s00339-004-3170-4 ↗
19. Dry etching characteristics of (Ba0.6,Sr0.4)TiO3 thin films in high density CF4/Ar plasma10.1016/S0257-8972(03)00285-8 ↗
20. Effects of starting powder and thermal treatment on the aerosol deposited BaTiO3 thin films toward less leakage currents