The effect of heat treatment process on structure and properties of ZnO nano layer produced by sol–gel method
Source abstract
Abstract
Abstract ZnO nano layer was prepared by sol–gel method using zinc acetate dihydrate, methanol and diethanolamine as precursor, solvent and stabilizer, respectively. According to the thermal analysis results, the heat treatment process after producing ZnO nano layer can be divided into three stages. The structure of the nano layer showed a significant dependency on heat treatment temperature in the low temperature heat treatment stage, which is performed to evaporate the organic components. The high temperature heat treatment stage has no significant effect on the structure of the films. The temperature employed in the first stage of heat treatment process during the initial 10 min of heat treatment was found to be important in determining the structure of the films. The results determined that the elimination condition of the organic components is very important for achieving high crystallinity.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: ZnO doping and properties · Gas Sensing Nanomaterials and Sensors · Copper-based nanomaterials and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (18)
Show source-provided references
1. Optical characterization of ZnO thin films deposited by sol–gel method10.1007/s10854-006-9036-0 ↗
2. Spin-coated ZnO thin films using ZnO nano-colloid10.1007/s11664-006-0247-1 ↗
3. Zinc oxide films prepared by sol–gel method10.1016/j.jcrysgro.2004.11.098 ↗
4. Influence of annealing temperature on the structural and optical properties of sol–gel prepared ZnO thin films10.1002/pssa.200521398 ↗
5. Preparation of ZnO porous thin films by sol–gel method using PEG template10.1016/j.matlet.2005.06.064 ↗
6. Highly conductive and transparent Ga-doped epitaxial ZnO films on sapphire by CVD10.1016/0040-6090(94)09485-3 ↗
7. A study on the chemical spray deposition of zinc oxide thin films and their structural and electrical properties10.1016/S0254-0584(98)00257-0 ↗
8. In situ monitoring of sputtered zinc oxide films for piezoelectric transducers10.1016/S0040-6090(99)00329-6 ↗
9. Indium doped zinc oxide thin films obtained by electrodeposition10.1016/j.tsf.2005.04.042 ↗
10. Preparation of ZnO porous thin films by sol–gel method using PEG template10.1016/j.matlet.2005.06.064 ↗
11. Sol–gel synthesis, comparative characterisation, and reliability analyses of undoped and Al-doped zinc oxide thin films10.1016/j.tsf.2009.02.056 ↗
12. Properties of sol–gel dip-coated zinc oxide thin films10.1016/j.jpcs.2007.06.006 ↗
13. The effect of thermal treatment conditions employed in sol–gel method on the structure of ZnO thin films10.1002/pssa.200881787 ↗
14. Spin coating of transparent zinc oxide films using novel precursor10.1007/s10854-008-9768-0 ↗
15. Effect of annealing conditions on properties of sol-gel derived Al-doped ZnO thin films10.1088/0256-307X/26/8/088105 ↗
16. Structural, optical and electrical properties of post annealed Mg doped ZnO films for optoelectronics applications10.1007/s11082-009-9317-y ↗
17. Alam MJ, Cameron DC, Investigation of annealing effects on sol–gel deposited transparent conductive ZnO:Al thin films in different atmospheres, in: Proceedings of the Second International Conference on Electrical and Computer Engineering ICECE, Dhaka, Bangladesh, 2002.10.1016/S0040-6090(02)00737-X ↗
18. Spin coating-pyrolysis derived highly c-axis-oriented ZnO layers pre-fired at various temperatures10.1016/j.cap.2006.09.016 ↗