A nanotree-like WO3 film with adjustable defect concentration and its photocatalytic activity
Source abstract
Abstract
Abstract A nanotree-like WO3 film with a large specific surface area was prepared by the facile hydrothermal process. During the procedure, a hexagonal/monoclinic mixed WO3 was formed, and the prepared WO3 crystals contained some defects, including W5+ and oxygen vacancies. To induce more defects, we further performed a mild solution reduction in the solution of EG + NH4F at a relatively low temperature of 333 K. The reduction treatment did not change the surface morphology of the WO3 film. However, the defect concentration first increased and then declined with the reduction time from 0 to 96 h. A proper defect concentration is beneficial for improving the photocatalytic activity of WO3 film, while excessive defects decreased photocatalytic activity instead. A volcano-like relationship between the photocatalytic activity and the defect concentration was also demonstrated. Compared with the as-annealed WO3 film, the photocatalytic activity of the as-reduced WO3 film for 48 h increased to 2.1 times. The hydrothermal process, followed by a mild solution reduction, is an effective way to prepare WO3 film with high photocatalytic activity.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Transition Metal Oxide Nanomaterials · Gas Sensing Nanomaterials and Sensors · Advanced Photocatalysis Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (42)
Show source-provided references
1. Tungsten oxide for photocatalysis, electrochemistry, and phototherapy10.1002/adma.201501217 ↗
2. WO3 nanoflakes for enhanced photoelectrochemical conversion10.1021/nn5053684 ↗
3. Ultrathin PEGylated W18O49 nanowires as a new 980 nm-laser-driven photothermal agent for efficient ablation of cancer cells in Vivo10.1002/adma.201204616 ↗
4. Synthesis and characterization of oxygen vacancy induced narrow bandgap tungsten oxide (WO3-x) nanoparticles by plasma discharge in liquid and its photocatalytic activity10.1007/s11090-020-10073-3 ↗
5. Room temperature plasma enriching oxygen vacancies of WO3 nanoflakes for photoelectrochemical water oxidation10.1016/j.jallcom.2019.152610 ↗
6. Intrinsic photocatalysis of morphology and oxygen vacancy-tunable ultrathin WO3 nanosheets10.1002/slct.202000325 ↗
7. Essential role of oxygen vacancy in electrochromic performance and stability for WO3-y films induced by atmosphere annealing10.1016/j.electacta.2019.135504 ↗
8. Oxygen vacancies mediated charge separation and collection in Pt/WO3 nanosheets for enhanced photocatalytic performance10.1016/j.apsusc.2019.145133 ↗
9. Boosting photocatalytic activity of WO3 nanorods with tailored surface oxygen vacancies for selective alcohol oxidations10.1016/j.apsusc.2018.08.181 ↗
10. Films of WO3 plate-like arrays with oxygen vacancies proportionally controlled via rapid chemical reduction10.1016/j.ijhydene.2017.11.094 ↗
11. Enhanced photoelectrochemical performance of plate-like WO3 induced by surface oxygen vacancies10.1016/j.elecom.2016.05.004 ↗
12. High quality, highly transparent Cu incorporated WO3 thin films suitable for blue LED application10.1016/j.vacuum.2019.109044 ↗
13. The importance of oxygen vacancies in nanocrystalline WO3-x thin films prepared by DC magnetron sputtering for achieving high photoelectrochemical efficiency10.1021/acs.jpcc.7b00856 ↗
14. Core-shell WO3-WS2 nanostructured thin films via plasma assisted sublimation and sulfurization10.1021/acsanm.9b00136 ↗
15. Enhanced electrochromic properties of WO3 nanotree-like structures synthesized via a two-step solvothermal process showing promise for electrochromic window application10.1021/acsanm.8b00190 ↗
16. Nanoscale heterostructures based on Fe2O3@WO3-x nanoneedles and their direct integration into flexible transducing platforms for toluene sensing10.1021/acsami.5b05081 ↗
17. Triple layer heterojunction WO3/BiVO4/BiFeO3 porous photoanode for efficient photoelectrochemical water splitting10.1021/acsaem.9b01041 ↗
18. Fabrication and properties of a branched (NH4)xWO3 nanowire array film and a porous WO3 nanorod array film10.1021/am507230t ↗
19. Morphology-tailored synthesis of tungsten trioxide (hydrate) thin films and their photocatalytic properties10.1021/am100875z ↗
20. Highly active Sb2S3-attached Mo-WO3 composite film for enhanced photoelectrocatalytic water splitting at extremely low input light energy10.1021/acssuschemeng.8b06545 ↗
21. The preparation of Fe-doped triclinic-hexagonal phase heterojunction WO3 film and its enhanced photocatalytic reduction of Cr (VI)10.1016/j.materresbull.2018.05.007 ↗
22. Facile preparation of nanoflower structured WO3 thin film on etched titanium substrate with high photoelectrochemical performance10.1016/j.jelechem.2018.11.001 ↗
23. Electrochromic behavior of WO3 nanotree films prepared by hydrothermal oxidation10.1016/j.solmat.2011.03.008 ↗
24. Facile synthesis of reduced graphene oxide/hexagonal WO3 nanosheets composites with enhanced H2S sensing properties10.1016/j.snb.2016.02.134 ↗
25. Photovoltaic hybrid film with polythiophene growing on monoclinic WO3 semiconductor substrates10.1021/la204990d ↗
26. Structural design of hexagonal/monoclinic WO3 phase junction for degradation degradation10.1016/j.materresbull.2019.110614 ↗
27. Fabrication of a monoclinic/hexagonal junction in WO3 and its enhanced photocatalytic degradation of Rhodamine B, Chin
28. Ultrathin oxygen-vacancy abundant WO3 decorated monolayer Bi2WO6 nanosheet: a 2D/2D heterojunction for the degradation of Ciprofloxacin under visible and NIR light irradiation10.1016/j.jcis.2019.08.101 ↗
29. Sonochemical-driven ultrafast facile synthesis of WO3 nanoplates with controllable morphology and oxygen vacancies for efficient photoelectrochemical water splitting10.1016/j.ultsonch.2018.09.023 ↗
30. Embedding of WO3 nanocrystals with rich oxygen-vacancies in solution processed perovskite film for improved photovoltaic performance10.1016/j.jpowsour.2020.228175 ↗
31. One-step oxygen vacancy engineering of WO3-x/2D g-C3N4 heterostructure: triple effects for sustaining photoactivity10.1016/j.jallcom.2019.04.297 ↗
32. The role of water in reducing WO3 film by hydrogen: controlling the concentration of oxygen vacancies and improving the photoelectrochemical performance10.1016/j.jcis.2017.10.039 ↗
33. Enhancement of the photoelectrochemical performance of WO3 vertical arrays film for solar water splitting by Gadolinium doping10.1021/acs.jpcc.5b00966 ↗
34. Electropolymerization of aniline onto anodic WO3 film: an approach to extend polyaniline electroactivity beyond pH 710.1021/jp509268t ↗
35. Facile synthesis of 2-D Cu doped WO3 nanoplates with structural, optical and differential anti cancer characteristics10.1016/j.physe.2016.12.008 ↗
36. Hexagonal boron nitride quantum dots as a superior hole extractor for efficient charge separation in WO3-based photoelectrochemical water oxidation10.1021/acsaem.9b01450 ↗
37. Enhanced gas-phase photocatalytic oxidation of n-pentane using high visible-light-driven Fe-doped WO3 nanostructures10.1016/j.jece.2018.10.037 ↗
38. Flower-like nanostructures of WO3: fabrication and characterization of their in-liquid gasochromic effect10.1016/j.snb.2015.11.044 ↗
39. Defective TiO2 with oxygen vacancies: synthesis, properties and photocatalytic applications10.1039/c3nr00476g ↗
40. The enhancement of TiO2 photocatalytic activity by hydrogen thermal treatment10.1016/S0045-6535(02)00486-1 ↗
41. Defective black TiO2 nanotube arrays for enhanced photocatalytic and photoelectrochemical applications10.1021/acsanm.9b01878 ↗
42. Effect of oxygen vacancies on the band edge properties of WO3 producing enhanced photocurrents10.1016/j.electacta.2018.11.061 ↗