Hierarchical CuInS2 synthesized with the induction of histidine for polymer/CuInS2 solar cells
Source abstract
Abstract
Abstract Hierarchical CuInS2 (H-CuInS2) was synthesized with the induction of histidine by the solverthermal method. The factors such as the category of the amino acid, the molar-quantity of histidine, the solvent, reaction time and reaction temperature were observed. The products were characterized by scanning electron microscope, X-ray diffraction, X-ray photoelectron spectroscopy, transmission electron microscopy and ultraviolet-visible absorption spectrum. The results showed that, histidine is proven to be effect to synthesize the uniform flower-like chalcopyrite H-CuInS2 in the solvent of N,N-dimethyl formamide at 180 °C for 24 h, which is originated from the strong coordinate ability of histidine. The change in the molar-quantity of histidine would result in the obviously different sizes and micro-structures of H-CuInS2, contributing to the different light-harvesting ability and fluorescence quenching efficiency to poly (2-methoxy-5-(2-ethylhexyloxy)-1,4-phenylene vinylene) (MEH-PPV). As a result, polymer solar cells with MEH-PPV and different H-CuInS2 displayed structure-dependent device performances, device based on small-sized H-CuInS2 obtained higher energy conversion efficiency of 0.59% under the monochromatic illumination of 15.85 mW/cm2 with wide spectrum response from 300 to 900 nm.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Perovskite Materials and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (95)
Show source-provided references
1. Potassium-induced surface modification of Cu(In, Ga)Se2 thin films for high-efficiency solar cells10.1038/nmat3789 ↗
2. CIGS-based solar cells for the next millennium10.1002/(SICI)1099-159X(200001/02)8:1<151::AID-PIP302>3.0.CO;2-Q ↗
3. Development of copperindiumdisulfide into a solar material10.1016/j.solmat.2004.02.034 ↗
4. Solar cells based on CuInS2—an overview10.1016/j.tsf.2004.11.042 ↗
5. Recent developments in II–VI and III–VI semiconductors and their applications in solar cells10.1039/B512182E ↗
6. Thin-film solar cells: review of materials, technologies and commercial status
7. Efficient CuInS2 thin-film solar cells prepared by a sequential process10.1088/0268-1242/13/12/022 ↗
8. Solar cell efficiency tables (Version 45)10.1002/pip.2573 ↗
9. Synthesis and characterization of CuInS2 quantum dot in the presence of novel precursors and its application in dyes solar cells10.1016/j.matlet.2015.01.076 ↗
10. Optimizing photovoltaic performance in CuInS2 and CdS quantum dot-sensitized solar cells by using an agar-based gel polymer electrolyte10.1039/C6RA27635K ↗
11. Sensitizers for aqueous-based solar cells10.1002/asia.201601627 ↗
12. A facile solvothermal method for synthesis of CuInS2 nanostructures
13. A single-step method for synthesis of CuInS2 nanostructures using cyclic microwave irradiation10.1016/j.ceramint.2016.07.019 ↗
14. CuInS2 nanoparticles: microwave-assisted synthesis, characterization, and photovoltaic measurements10.1016/j.mssp.2012.09.005 ↗
15. Preparation of a CuInS2 nanoparticle ink and application in a selenization-free, solution-processed superstrate solar cell10.1002/ejic.201500749 ↗
16. Relation of nanostructure and recombination dynamics in a low-temperature solution-processed CuInS2 nanocrystalline solar cell10.1002/aenm.201300449 ↗
17. Synthesis and characterization of CuInS2 microsphere under controlled reaction conditions and its application in low-cost solar cells10.1016/j.mssp.2013.04.026 ↗
18. Solid-state and solution phase metathetical synthesis of copper indium chalcogenides10.1039/a804430i ↗
19. Synthesis of Cu-In-S ternary nanocrystals with tunable structure and composition10.1021/ja711027j ↗
20. Nanocrystalline chalcopyrite materials (CuInS2 and CuInSe2) via low-temperature pyrolysis of molecular single-source precursors10.1021/cm034161o ↗
21. Phase-selective synthesis of CuInS2 nanocrystals10.1021/jp905234y ↗
22. Elemental solvothermal reaction to produce ternary semiconductor CuInE2 (E) S, Se) nanorods10.1021/ic000126x ↗
23. Shape-controlled synthesis of ternary chalcogenide ZnIn2S4 and CuIn(S,Se)2 nano-/microstructures via facile solution route10.1021/ja0580845 ↗
24. Synthesis and characterization of ternary CuInS2 nanorods via a hydrothermal route10.1006/jssc.2001.9247 ↗
25. Shape-controlled synthesis and optical characterization of chalcopyrite CuInS2 microstructures10.1016/j.jcrysgro.2007.02.040 ↗
26. CuInS2 nanostructures: synthesis, characterization, formation mechanism and solar cell applications10.1016/j.jiec.2013.12.082 ↗
27. Preparation of stochiometric CuInS2 nanostructures by ultrasonic method10.1049/mnl.2012.0393 ↗
28. Synthesis and characterization of CuInS2 nanostructure by ultrasonic-assisted method and different precursors10.1016/j.materresbull.2012.08.044 ↗
29. A facile route to the synthesis of CuInS2 nanoparticles10.1016/j.matlet.2006.01.025 ↗
30. Nanocrystalline chalcopyrite materials (CuInS2 and CuInSe2) via low-temperature pyrolysis of molecular single-source precursors10.1021/cm034161o ↗
31. Copper-indium sulfide hollow nanospheres synthesized by a facile solution-chemical method10.1021/cg701257x ↗
32. Hybrid solar cells based on nanoparticles of CuInS2 in organic matrices10.1002/adfm.200390024 ↗
33. Investigation of the morphology and electrical characteristics of hybrid blends based on poly(3-hexylthiophene) and colloidal CuInS2 nanocrystals of different shapes10.1016/j.orgel.2012.09.007 ↗
34. Three-dimensional morphology of CuInS2:P3HT hybrid blends for photovoltaic applications10.1063/1.4936198 ↗
35. Charge transfer and recombination in organic/inorganic hybrid composites with CuInS2 nanocrystals studied by light-induced electron spin resonance10.1016/j.solmat.2014.02.010 ↗
36. M. Piber, T. Rath, T. Grieber, G. Trimmel, F. Stelzer, D. Meissner, Hybrid solar cells based on CuInS2 and MEH-PPV, in: Proceedings of the IEEE 4th World Conference on Photovoltaic Energy Conversion, 1, 2006, pp. 247–248.10.1109/WCPEC.2006.279436 ↗
37. CuInS2 quantum dots synthesized by a solvothermal route and their application as effective electron acceptors for hybrid solar cells10.1039/c0jm00611d ↗
38. Size-dependent polymer/CuInS2 solar cells with tunable synthesis of CuInS2 quantum dots10.1016/j.mssp.2014.03.019 ↗
39. A direct route towards polymer/copper indium sulfide nanocomposite solar cells10.1002/aenm.201100442 ↗
40. L-cysteine assisted-synthesis of 3D In2S3 for 3D CuInS2 and its application in hybrid solar cells10.1039/C7RA05730J ↗
41. Fast production of self-assembled hierarchical γ-Fe2O3 nanoarchitectures10.1021/jp073073e ↗
42. Photovoltaic devices with a low band gap polymer and CdSe nanostructures exceeding 3% efficiency10.1021/nl903406s ↗
43. The effect of nanoparticle shape on the photocarrier dynamics and photovoltaic device performance of Poly(3-hexylthiophene):CdSe nanoparticle bulk heterojunction solar cells10.1002/adfm.201000628 ↗
44. Nanoscale analysis of a hierarchical hybrid solar cell in 3D10.1002/adfm.201302836 ↗
45. Nearly monodisperse CuInS2 hierarchical microarchitectures for photocatalytic H2 evolution under visible light10.1021/ic802399f ↗
46. Sacrificial template synthesis and photothermal conversion enhancements of hierarchical and hollow CuInS2 microspheres10.1021/jp400806k ↗
47. Spinel indium sulfide precursor for the phase-selective synthesis of Cu–In–S nanocrystals with zinc-blende, wurtzite, and spinel structures10.1021/cm400848f ↗
48. Template Synthesis of CuInS2 nanocrystals from In2S3 nanoplates and their application as counter electrodes in dye-sensitized solar cells10.1021/acs.chemmater.5b01971 ↗
49. One-Pot controlled synthesis of sponge like CuInS2 microspheres for efficient counter electrode with graphene assistance in dye-sensitized solar cells10.1021/am405100g ↗
50. Preparation of monodispersed CuInS2 nanopompons and nanoflake films and application in dye-sensitized solar cells10.1039/c3cp44485f ↗
51. Biomolecule-assisted synthesis of highly ordered snowflakelike structures of bismuth sulfide nanorods10.1021/ja0386389 ↗
52. Metallic nanowires created by biopolymer masking10.1063/1.125172 ↗
53. Tartatric acid and L-cysteine synergistic-assisted synthesis of antimony trisulfide hierarchical structures in aqueous solution10.1002/ejic.200900607 ↗
54. Shape-controlled synthesis of 3D and 1D structures of CdS in a binary solution with L-cysteine's assistance10.1002/chem.200600786 ↗
55. L-cysteine-assisted synthesis and optical properties of Ag2S nanospheres10.1021/jp710597j ↗
56. L-cysteine-assisted synthesis of PbS nanocube-based pagoda-like hierarchical architectures10.1021/jp0766149 ↗
57. Biomolecule-assisted synthesis of flower-like NiS microcrystals via a hydrothermal process10.1016/j.jallcom.2009.12.149 ↗
58. Biomolecule-assisted synthesis of copper indium sulfide microspheres with nanosheets10.1016/j.matlet.2009.08.050 ↗
59. Bionic synthesis of ZnS:Mn nanocrystals and their optical properties10.1039/b108394e ↗
60. Zinc–histidine as nucleation centers for growth of ZnS nanocrystals10.1006/bbrc.2000.2712 ↗
61. Biosynthesis of cadmium sulphide quantum semiconductor crystallites10.1038/338596a0 ↗
62. Growth mechanism and optical property of CdS nanoparticles synthesized using amino-acid histidine as chelating agent under sonochemical process10.1016/j.ultsonch.2009.04.011 ↗
63. Synthesis of histidine-stabilized cadmium sulfide quantum dots: study of their fluorescence behaviour in the presence of adenine and guanine10.1016/j.cplett.2010.03.068 ↗
64. Integrated optoelectronic devices based on conjugated polymers10.1126/science.280.5370.1741 ↗
65. Amorphous crystalline blend effects on the performance of polymer-based photovoltaic cells10.7498/aps.58.6582 ↗
66. Electron transfer and electronic structure of KCuFeS210.1016/0925-8388(95)02062-4 ↗
67. Surface chemistry of CuxS and CuxS/CdS determined from x-ray photoelectron spectroscopy10.1063/1.335283 ↗
68. Self-assembled porous 3D flowerlike β-In2S3 structures: synthesis, characterization, and optical properties10.1021/jp710074h ↗
69. J.F. Moulder, W.F. Stickle, P.E. Sobol, K. Bomben, Handbook of X-ray Photoelectron Spectroscopy, Copyright 1992 by Perkin-Elmer Corp.: Physical Electronic Division, 1992.
70. Tunable photoluminescence wavelength of chalcopyrite CuInS2-based semiconductor nanocrystals synthesized in a colloidal system10.1021/cm0518022 ↗
71. Controlled synthesis and optical properties of colloidal ternary chalcogenide CuInS2 nanocrystals10.1021/cm8006827 ↗
72. Synthesis of Cu-In-S ternary nanocrystals with tunable structure and composition10.1021/ja711027j ↗
73. Development of CuInSe2 nanocrystal and nanoring inks for low-cost solar cells10.1021/nl802042g ↗
74. Noninjection gram-scale synthesis of monodisperse pyramidal CuInS2 nanocrystals and their size-dependent properties10.1021/nn1015538 ↗
75. Photoinduced electron transfer from conjugated polymers to CdSe nanocrystals10.1103/PhysRevB.59.10622 ↗
76. Quantum dot solar cells, tuning photoresponse through size and shape control of CdSe-TiO2 architecture10.1021/ja0782706 ↗
77. X-ray structure of physiological copper(II)−bis(L-histidinato) complex10.1021/ic035413q ↗
78. Synthesis of copper indium sulfide nanoparticles by solvothermal method10.1016/j.matlet.2009.02.032 ↗
79. Charge separation and transport in conjugated-polymer/semiconductor-nanocrystal composites studied by photoluminescence quenching and photoconductivity10.1103/PhysRevB.54.17628 ↗
80. Picosecond time-resolved photoluminescence of PPV derivatives10.1016/S0379-6779(97)80837-5 ↗
81. Hybrid solar cells from regioregular polythiophene and ZnO nanoparticles10.1002/adfm.200500573 ↗
82. Improved performance of polymer/TiO2 nanorod bulk heterojunction photovoltaic devices by interface modification10.1063/1.2839405 ↗
83. Interfacial nanostructuring on the performance of polymer/TiO2 nanorod bulk heterojunction solar cells10.1021/ja8079143 ↗
84. Energy transfer dynamics of nanocrystal-polymer composites10.1021/jp044531b ↗
85. Conjugated polymer-based organic solar cells10.1021/cr050149z ↗
86. Hybrid conjugated polymer/semiconductor photovoltaic cells10.1016/j.synthmet.2009.10.031 ↗
87. Conjugated polymer–inorganic semiconductor hybrid solar cells10.1039/c0ee00632g ↗
88. Band-offset engineering for enhanced open-circuit voltage in polymer–oxide hybrid solar cells10.1002/adfm.200600215 ↗
89. Design rules for donors in bulk-heterojunction solar cells—towards 10% energy-conversion efficiency10.1002/adma.200501717 ↗
90. On voltage, photovoltage and photocurrent in bulk heterojunction organic solar cells10.1021/jz2004864 ↗
91. Efficient hybrid solar cells based on meso-superstructured organometal halide perovskites10.1126/science.1228604 ↗
92. Influence of trap filling on photocurrent transients in polycrystalline TiO210.1063/1.104839 ↗
93. Activation energy of electron transport in dye-sensitized TiO2 solar cells10.1021/jp0513770 ↗
94. TiO2/CuInS2-core/shell nanoarrays for polymer-based hybrid solar cells with aligned bulk heterojunctions10.1016/j.solener.2015.01.002 ↗
95. Inverted polymer solar cells integrated with a low-temperature-annealed sol-gel-derived ZnO film as an electron transport layer10.1002/adma.201004301 ↗