Growth of bulk Si from Si–Al alloy by temperature gradient zone melting
Source abstract
Abstract
Abstract The continuous growth of bulk Si in the Si–Al alloy using the temperature gradient zone melting (TGZM) technique is an effective method to separate the primary Si from the eutectic structure in the Si–Al alloy and to remove the majority of impurities, such as metals, B and P elements during the alloy refining process. A Si source was used to maintain the Si concentration in the alloy melt and reduce the influence of the solute-transmitting process by temperature gradient due to the precipitation of the primary Si. Bulk Si could be obtained in the Si–Al alloy through the TGZM process. With the initial temperature of 1461 K and temperature gradient of 1.81 K/mm, the actual growth rate of the bulk Si was 0.000186 mm/s. No inclusions and alloy phases were observed in the bulk Si. The removal rate of Fe impurity was 99.9% and the removal fraction of B, P and Al was 71.2%, 90.2%, 78.5% respectively.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Silicon and Solar Cell Technologies · Aluminum Alloy Microstructure Properties · Intermetallics and Advanced Alloy Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (23)
Show source-provided references
1. Chu · 2011
2. Effect of solidification conditions on the silicon growth and refining using Si–Sn melt10.1016/j.jcrysgro.2015.08.001 ↗
3. Purification of metallurgical grade silicon by acid leaching10.1016/0304-386X(90)90007-O ↗
4. Purification of metallurgical grade silicon by a microwave-assisted plasma process10.1016/j.seppur.2012.09.035 ↗
5. Study on volatilization rate of silicon in multicrystalline silicon preparation from metallurgical grade silicon10.1016/j.vacuum.2010.11.010 ↗
6. Removal of boron from molten silicon using CaO-SiO2 based slags10.2355/isijinternational.49.783 ↗
7. Thermodynamics of boron distribution in solvent refining of silicon using ferrosilicon alloys10.1016/j.jallcom.2014.09.062 ↗
8. Impurities in silicon solar cells, IEEE Trans. Electron Devices10.1109/T-ED.1980.19922 ↗
9. Thermodynamics of impurity elements in solid silicon10.1016/j.jallcom.2009.09.190 ↗
10. Si purity control and separation from Si–Al alloy melt with Zn addition10.1016/j.jallcom.2014.05.138 ↗
11. Low-cost solar grade silicon purification process with Al–Si system using a powder metallurgy technique10.1016/j.seppur.2010.11.016 ↗
12. Refining of silicon during its solidification from a Si–Al melt10.1016/j.jcrysgro.2008.09.095 ↗
13. Refining of metallurgical grade Si by solidification of Al–Si melt under electromagnetic stirring10.1016/j.jmatprotec.2015.03.012 ↗
14. Si purification by solidification of Al–Si melt with super gravity10.1016/S1003-6326(11)61270-3 ↗
15. Purification of metallurgical silicon using iron as an impurity getter part I: growth and separation of Si10.1007/s12540-011-1021-3 ↗
16. Hydrometallurgical purification of metallurgical-grade silicon10.1016/0379-6787(83)90015-7 ↗
17. Control of Si Crystal Growth during Solidification of Si-Al Melt10.2320/matertrans.M2010001 ↗
18. Effect of solidification conditions on Si growth from Si‐Cu melts, Mater. process
19. Si growth by directional solidification of Si–Sn alloys to produce solar-grade Si10.1016/j.jcrysgro.2013.05.024 ↗
20. Temperature gradient zone melting10.1016/0146-3535(83)90022-9 ↗
21. Temperature gradient zone melting: approach to steady state10.1016/0022-0248(84)90151-9 ↗
22. Synchrotron microradiography of temperature gradient zone melting in directional solidification10.1007/s11661-006-0076-0 ↗
23. In situ and real-time analysis of TGZM phenomena by synchrotron X-ray radiography