journal article·2017-03

3D numerical study of coupled crystallization and carbon segregation during multi-crystalline silicon ingot solidification

Amir Reza Ansari Dezfoli, Weng-Sing Hwang, Anmar Khalid Shukur, James Augusto, Yu Shan Huang, ShiKai Tzeng

Publisher page

Abstract

Abstract During the solidification of silicon ingot, the carbon concentration may play a critical role with regard to the final silicon microstructure. If the carbon concentration passes the solubility limit, SiC particles precipitate and it is possible the grain structure changes from columnar to equiaxed grains. Furthermore, carbon atoms are confined inside these equiaxed grains during solidification, which may decrease the carbon concentration inside the liquid silicon, and the equiaxed grains then become columnar again. Therefore, both solidification and carbon concentration will impact each other. A 3D multiscale model is developed to simulate the microstructural evolution of Multi-Crystalline Silicon (mc-Si) ingots coupled with the carbon concentration during the casting process. Our microstructural model is based on the simulation of nucleation and crystal growth. Besides modelling the nucleation due to silicon-crucible interaction, this model can successfully represent the occurrence of equiaxed grains observed ahead of a planar faceted interface due to carbon segregation during solidification. In addition, by coupling concentration and crystallization, the transition from columnar to equiaxed growth and equiaxed to columnar growth can be modeled. Several comparisons are made between the mc-Si ingot's microstructure obtained by our model and the experimental data in order to evaluate our model. These comparisons show good agreement between our model and the experimental data.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Solidification and crystal growth phenomena · Silicon and Solar Cell Technologies · Aluminum Alloy Microstructure Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (48)

Show source-provided references
1. Structural and electrical charaterization of crystallographic defects in silicon ribbons10.1016/0022-0248(80)90252-3 ↗
2. Microstructures of Si multicrystals and their impact on minority carrier diffusion length10.1016/j.actamat.2009.03.033 ↗
3. On black solar cells or the tetrahedral texturing of a silicon surface10.1109/T-ED.1976.18576 ↗
4. Grain growth behaviors of polycrystalline silicon during melt growth processes10.1016/j.jcrysgro.2004.03.008 ↗
5. Micro-Raman spectroscopy to study local mechanical stress in silicon integrated circuits10.1088/0268-1242/11/2/001 ↗
6. Impurities in silicon solar cells10.1109/T-ED.1980.19922 ↗
7. Undercooling measurement and nucleation study of silicon droplet solidification10.1002/crat.201400165 ↗
8. Nucleation of silicon on Si3N4 coated SiO210.1016/j.jcrysgro.2011.07.003 ↗
9. One-dimensional model of the equiaxed grain formation in multi-crystalline silicon10.1016/j.jcrysgro.2011.02.001 ↗
10. The effect of substrate material on nucleation behavior of molten silicon for photovoltaics10.1016/j.jcrysgro.2009.12.010 ↗
11. Nucleation properties of undercooled silicon at various substrates10.1063/1.3574446 ↗
12. Growth of multicrystalline silicon ingot with both enhanced quality and yield through quartz seeded method10.1016/j.jcrysgro.2015.11.020 ↗
13. Seed-assisted growth of high-quality multi-crystalline silicon in directional solidification10.1016/j.jcrysgro.2013.09.051 ↗
14. High-quality multi-crystalline silicon (mc-Si) grown by directional solidification using notched crucibles10.1016/j.jcrysgro.2010.10.090 ↗
15. Modelling of the transition from a planar faceted front to equiaxed growth: application to photovoltaic polycrystalline silicon10.1016/j.jcrysgro.2008.10.011 ↗
16. Relationship between dislocation density and nucleation of multicrystalline silicon10.1016/j.actamat.2010.01.042 ↗
17. Impurities influence on multicrystalline photovoltaic Silicon10.1007/s12666-009-0065-2 ↗
18. Characterization of deep level defects present in mono-like, quasi-mono and multicrystalline silicon solar substrates10.1088/0268-1242/30/3/035011 ↗
19. In-situ observations of melt growth behavior of polycrystalline silicon10.1016/j.jcrysgro.2003.10.075 ↗
20. Dendritic crystal growth in pure materials10.1016/j.jcrysgro.2003.12.034 ↗
21. Mechanisms for crystallographic orientation in the crystallization of thin silicon films from the melt10.1557/JMR.1988.1232 ↗
22. Dendrite growth processes of silicon and germanium from highly undercooled melts10.1007/s11661-999-0282-7 ↗
23. In situ observation of Si faceted dendrite growth from low-degree-of-undercooling melts10.1016/j.actamat.2008.01.038 ↗
24. Morphological transition in crystallization of Si from undercooled melt
25. Growth mechanism of twin-related and twin-free facet Si dendrites10.1016/j.actamat.2005.03.022 ↗
26. Modeling of poly-crystalline silicon ingot crystallization during casting and theoretical suggestion for ingot quality improvement10.1016/j.mssp.2016.05.013 ↗
27. Bulk multicrystalline silicon growth for photovoltaic (PV) application10.1016/j.jcrysgro.2007.11.194 ↗
28. Numerical simulation of microstructure evolution of Ti-6Al-4V alloy in vertical centrifugal casting10.1016/j.msea.2006.04.014 ↗
29. Modeling of equiaxed microstructure formation in casting10.1007/BF02670257 ↗
30. Garimella · 1994
31. Effects of argon flow on heat transfer in a directional solidification process for silicon solar cells10.1016/j.jcrysgro.2010.11.040 ↗
32. Three-dimensional simulation of dendritic grain structures of gas-atomized Al-Cu alloy droplets10.2355/isijinternational.38.63 ↗
33. A modified cellular automaton model for the simulation of dendritic growth in solidification of alloys10.2355/isijinternational.41.436 ↗
34. Modified cellular automaton model for the prediction of solidification microstructures10.2355/isijinternational.42.520 ↗
35. A three-dimensional cellular automation-finite element model for the prediction of solidification grain structures10.1007/s11661-999-0226-2 ↗
36. Modeling the multi-crystalline silicon ingots solidification process in a vertical square furnace
37. T.D.N.Mangelinck-Noe, D.Ballutaud, N.Le Quang, G.Goae, 20th European Photovoltaic Solar Energy Conference and Exhibition, Barcelona, Spainpp, 2005, pp. 6–10.
38. Carbon solubility in solid and liquid silicon—A review with reference to eutectic equilibrium10.1361/105497199770335956 ↗
39. Carbon concentration and particle precipitation during directional solidification of multicrystalline silicon for solar cells10.1016/j.jcrysgro.2007.11.165 ↗
40. The carbon distribution in multicrystalline silicon ingots grown using the directional solidification process10.1016/j.jcrysgro.2009.11.020 ↗
41. Effects of growth temperature on the surface morphology of silicon thin films on (111) silicon monocrystalline substrate by liquid phase epitaxy10.1016/j.jcrysgro.2003.12.081 ↗
42. H.Fredriksson, U.Åkerlind, Faceted and Dendritic Solidification Structures, Solidification and Crystallization Processing in Metals and Alloys, pp. 475-586.
43. Unified description of the rate of nucleation-mediated crystal growth10.1016/0022-0248(89)90644-1 ↗
44. In situ observations of crystal growth behavior of silicon melt10.1016/S0022-0248(02)01521-X ↗
45. Directional growth method to obtain high quality polycrystalline silicon from its melt10.1016/j.jcrysgro.2006.04.016 ↗
46. Texturization of cast multicrystalline silicon for solar cells10.1088/0268-1242/19/3/035 ↗
47. Cellular automaton model for the prediction of solidification morphologies of brass alloy by horizontal continuous casting and its experimental verification10.2320/matertrans.M2010402 ↗
48. P. Bhattacharya R. Fornari H. Kamimura, Comprehensive Semiconductor Science and Technology Six-Volume Set, Newnes, 2011