In situ growth of CuSbS2 thin films by reactive co-sputtering for solar cells
Source abstract
Abstract
Abstract CuSbS2 thin films were in situ grown by reactive co-sputtering and the effects of the growth temperature on film composition, structure and morphology were investigated. It is demonstrated that orthorhombic chalcostibite CuSbS2 thin films with uniform morphology, pure phase and grain size over 2 µm can be obtained for growth temperature of 300 ℃, while higher growth temperature results in the formation of Cu3SbS4 phase and lower growth temperature leads to Sb2S3 secondary phase. The grown CuSbS2 film shows an optical absorption coefficient of higher than 104 cm−1, an optical band gap of 1.52 eV and p-type conductivity. Solar cell devices with configuration of glass/Mo/CuSbS2/CdS/i-ZnO/ITO/Ag were fabricated and yield power conversion efficiency of 0.52%. The incompatible interfaces including absorber/back contact (the absence of beneficial MoS2 interface layer) and absorber/buffer layer (unfavorable “cliff”-like conduction band offset) interfaces have been considered as the key factor limiting efficiency.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Copper-based nanomaterials and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (62)
Show source-provided references
1. Effects of heavy alkali elements in Cu(In,Ga)Se2 solar cells with efficiencies up to 22.6%10.1002/pssr.201600199 ↗
2. CdTe solar cells at the threshold to 20% efficiency10.1109/JPHOTOV.2013.2278661 ↗
3. CuSbS2 as a promising earth-abundant photovoltaic absorber material: a combined theoretical and experimental study10.1021/cm500516v ↗
4. Solution-based synthesis of chalcostibite (CuSbS2) nanobricks for solar energy conversion10.1039/c2ra21554c ↗
5. Earth abundant CuSbS2 thin films solution processed from thiol–amine mixtures10.1039/C6TC02117D ↗
6. Phase controlled synthesis of CuSbS2 nanostructures: effect of reaction conditions on phase purity and morphology10.1016/j.matdes.2017.09.059 ↗
7. Sugaki · 1973
8. Fabrication and characterization of cost-efficient CuSbS2 thin film solar cells using hybrid inks10.1016/j.solmat.2016.02.013 ↗
9. Thin film solar cell based on CuSbS2 absorber fabricated from an electrochemically deposited metal stack10.1016/j.tsf.2013.11.046 ↗
10. Trade-offs in thin film solar cells with layered chalcostibite photovoltaic absorbers10.1002/aenm.201601935 ↗
11. Two-stage co-evaporated CuSbS2 thin films for solar cells10.1016/j.jallcom.2016.04.193 ↗
12. Post annealing effects on structural, optical and electrical properties of CuSbS2 thin films fabricated by combinatorial thermal evaporation technique10.1016/j.spmi.2015.10.024 ↗
13. Investigation on dispersive optical constants and microstructural parameters of the absorber CuSbS2 thin films10.1016/j.vacuum.2014.11.017 ↗
14. Growth and vacuum post-annealing effect on the properties of the new absorber CuSbS2 thin films10.1016/j.matlet.2008.04.003 ↗
15. Optical and structural properties of CuSbS2 thin films grown by thermal evaporation method10.1016/j.tsf.2008.11.021 ↗
16. Preparation of CuSbS2 thin films by co-sputtering and solar cell devices with band gap-adjustable n-type InGaN as a substitute of ZnO10.1007/s11664-015-4174-x ↗
17. Effects of thermochemical treatment on CuSbS2 photovoltaic absorber quality and solar cell reproducibility10.1021/acs.jpcc.6b04206 ↗
18. Accelerated development of CuSbS2 thin film photovoltaic device prototypes10.1002/pip.2735 ↗
19. Al-Saab · 2015
20. Low-temperature atomic layer deposition of CuSbS2 for thin-film photovoltaics10.1021/acsami.6b13033 ↗
21. Formation of CuSbS2 and CuSbSe2 thin films via chalcogenisation of Sb–Cu metal precursors10.1016/j.tsf.2011.01.140 ↗
22. p-Type CuSbS2 thin films by thermal diffusion of copper into Sb2S310.1016/j.solmat.2010.06.011 ↗
23. CuSbS2 thin films by heating Sb2S3/Cu layers for PV applications
24. In situ gas-solid reaction for fabrication of copper antimony sulfide thin film as photovoltaic absorber10.1016/j.matlet.2017.07.106 ↗
25. The influence of the deposition condition on crystal growth and on the band gap of CuSbS2 thin film absorber used for Solid State Solar Cells (SSSC)
26. The influence of the precursor concentration on CuSbS2 thin films deposited from aqueous solutions10.1016/j.tsf.2006.12.046 ↗
27. Tailoring the composition and properties of sprayed CuSbS2 thin films by using polymeric additives10.1155/2012/962649 ↗
28. Spray pyrolysed thin films of copper antimony sulfide as photovoltaic absorber10.1002/pssc.201510102 ↗
29. Selective thin film synthesis of copper-antimony-sulfide using hybrid ink10.1016/j.solener.2016.12.048 ↗
30. Solution processed CuSbS2 films for solar cell applications10.1016/j.tsf.2017.12.002 ↗
31. Selective production of CuSbS2, Cu3SbS3, and Cu3SbS4 nanoparticles using a hot injection protocol10.1039/C4RA07648F ↗
32. Platelet CuSbS2 particles with a suitable conduction band position for solar cell applications10.1016/j.matlet.2017.12.084 ↗
33. Investigation on microstructural and optical properties of CuSbS2 nanoparticles synthesized by hydrothermal technique
34. B. John, G.G. Silvena, A.L. Rajesh, Investigating the Effect of Solvents for the Preparation of CuSbS2 Nanoparticles by Solvothermal Method, 1832, 2017, 050007.10.1063/1.4980240 ↗
35. Preparation, formation mechanism and photoelectric properties of well-aligned CuSbS2 nanowires10.1016/j.jallcom.2015.07.030 ↗
36. Synthesis and characterization of ternary CuSbS2 thin films
37. Thin film solar cell based on CuSbS2 absorber prepared by chemical bath deposition (CBD)10.1016/j.materresbull.2016.11.028 ↗
38. CuSbS2 thin film formed through annealing chemically deposited Sb2S3–CuS thin films10.1016/S0022-0248(01)00672-8 ↗
39. S. Ikeda, Y. Iga, W. Septina, T. Harada, M. Matsumura, CuSbS2-based thin film solar cells prepared from electrodeposited metallic stacks composed of Cu and Sb layers, in: Proceedings of the Photovoltaic Specialists Conference (PVSC), 2013 IEEE 39th (2598–2601, 2013) pp. 2598–2601.10.1109/PVSC.2013.6745005 ↗
40. CuSbS2 as a negative electrode material for sodium ion batteries10.1016/j.jpowsour.2016.12.100 ↗
41. Properties of CuSbS2 thin films electrodeposited from ionic liquids as p-type absorber for photovoltaic solar cells10.1016/j.tsf.2014.06.031 ↗
42. CuSbS2-sensitized inorganic-organic heterojunction solar cells fabricated using a metal-thiourea complex solution10.1002/anie.201411329 ↗
43. Preparation of CuSbS2 thin films by a facile and low-cost chemical solution method
44. Temperature dependent solvothermal synthesis of Cu-Sb-S nanoparticles with tunable structural and optical properties10.1016/j.materresbull.2017.07.026 ↗
45. CuSbS 2 thin films by rapid thermal processing of Sb2S3-Cu stack layers for photovoltaic application10.1016/j.solmat.2017.02.005 ↗
46. In situ growth of Cu2ZnSnS4 thin films by reactive magnetron co-sputtering10.1016/j.solmat.2010.08.003 ↗
47. Fabrication of Cu2ZnSn(S,Se)4 thin film solar cells by selenization of reactively sputtered precursors10.1016/j.matlet.2016.07.017 ↗
48. Self-regulated growth and tunable properties of CuSbS2 solar absorbers10.1016/j.solmat.2014.09.041 ↗
49. Optimization of CIGS-based PV device through antimony doping10.1021/cm903428f ↗
50. Core Levels, Band alignments, and valence-band states in CuSbS2 for solar cell applications10.1021/acsami.7b14208 ↗
51. A novel one-step solvothermal route to nanocrystalline CuSbS2 and Ag3SbS310.1016/S0167-2738(99)00094-6 ↗
52. Quantitative X-ray photoelectron spectroscopy study of enargite (Cu3AsS4) surface10.1002/sia.1072 ↗
53. Surface chemistry of CuxS and CuxS/CdS determined from x‐ray photoelectron spectroscopy10.1063/1.335283 ↗
54. Characterization of RF reactively sputtered Cu-In-S thin films10.1016/S0921-4526(01)00855-9 ↗
55. Beyond 8% ultrathin kesterite Cu2ZnSnS4 solar cells by interface reaction route controlling and self-organized nanopattern at the back contact10.1038/am.2017.103 ↗
56. Determining factor of MoSe2 formation in Cu(In,Ga)Se2 solar cells10.1016/j.solmat.2012.02.015 ↗
57. A study on MoSe2 layer of Mo contact in Cu(In,Ga)Se2 thin film solar cells10.1016/j.tsf.2014.04.016 ↗
58. Alkali-metal-enhanced grain growth in Cu2ZnSnS4 thin films10.1039/C3EE44130J ↗
59. Cd-free buffer layer materials on Cu2ZnSn(SxSe1−x)4: band alignments with ZnO, ZnS, and In2S310.1063/1.4714737 ↗
60. Theoretical analysis of the effect of conduction band offset of window/CIS layers on performance of CIS solar cells using device simulation10.1016/S0927-0248(00)00266-X ↗
61. Optical properties and electronic structures of CuSbS2, CuSbSe2, and CuSb (S1-xSex)2 solid solution
62. Over 9% efficient kesterite Cu2ZnSnS4 solar cell fabricated by using Zn1-xCdxS buffer layer10.1002/aenm.201600046 ↗