A simple non-recessed and Au-free high quality Ohmic contacts on AlGaN/GaN: The case of Ti/Al alloy
Source abstract
Abstract
Abstract In this work, non-recessed and Au-free low resistance Ohmic contacts are investigated on AlGaN/GaN on silicon. Based on Ti/Al bilayers, Circular TLM are fabricated and contact values are extracted varying different parameters such as single and combined annealing temperatures and surface treatment. Alloy formation upon annealing has been monitored by XRD. The results indicated that two phases, Ti3AlN and cubic TiAl3, have been formed upon annealing. Furthermore, the increase of Al thickness (up to 240 nm) resulted in a tetragonal TiAl3 phase formation, with a contact resistance degradation. Finally, we have shown that a low contact resistance (1 Ω mm) is achievable after clean 1 (Caro's + SC1 + HF) and upon annealing at 500 °C for 3 min and 800 °C for 30 s when using 70 nm and 180 nm of Ti and Al, respectively. In this case, the presence of an additional Ti3AlN (111) phase has been identified and is certainly the origin of the high quality of the Ohmic contact.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: GaN-based semiconductor devices and materials · Metal and Thin Film Mechanics · Semiconductor materials and devices
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (25)
Show source-provided references
1. High-power GaN P-N junction blue-light-emitting diodes
2. Spontaneous polarization and piezoelectric constants of III-V nitrides10.1103/PhysRevB.56.R10024 ↗
3. Two-dimensional electron gases induced by spontaneous and piezoelectric polarization charges in N- and Ga-face AlGaN/GaN heterostructures10.1063/1.369664 ↗
4. Investigation of temperature dependent electrical properties of Ni/Al0.26Ga0.74N Schottky barrier diodes10.1016/j.tsf.2014.05.007 ↗
5. Au-Free AlGaN / GaN power diode on 8-in Si substrate with gated edge termination10.1109/LED.2013.2267933 ↗
6. Low resistance ohmic contacts on AlGaN/GaN structures using implantation and the “advancing” Al/Ti metallization10.1063/1.123927 ↗
7. Ohmic contacts to Gallium Nitride materials10.1016/j.apsusc.2016.04.016 ↗
8. Optimisation of the Ti/Al/Ni/Au ohmic contact on AlGaN/GaN FET structures10.1016/S0022-0248(02)00920-X ↗
9. Degradation of TiAlNiAu as ohmic contact metal for GaN HEMTs10.1016/j.microrel.2009.06.043 ↗
10. Formation mechanism of Ohmic contacts on AlGaNGaN heterostructure: electrical and microstructural characterizations
11. Direct contact mechanism of Ohmic metallization to AlGaN/GaN heterostructures via Ohmic area recess etching
12. Electrical properties, microstructure, and thermal stability of Ta-based ohmic contacts annealed at low temperature for GaN HEMTs10.1088/0268-1242/26/7/075006 ↗
13. Comparative study of Ti/Al/Mo/Au, Mo/Al/Mo/Au, and V/Al/Mo/Au ohmic contacts to AlGaN∕GaN heterostructures
14. Microstructure of Ti/Al ohmic contacts for n-AlGaN10.1063/1.122512 ↗
15. Study of contact formation in AlGaN / GaN heterostructures10.1063/1.119786 ↗
16. Ti/Al ohmic contacts on AlGaN/GaN heterostructures with different defect density10.1016/j.apsusc.2014.07.018 ↗
17. Stability evaluation of Au-free Ohmic contacts on AlGaN/GaN HEMTs under a constant current stress10.1016/j.microrel.2014.07.076 ↗
18. The role of Al on Ohmic contact formation on n -type GaN and AlGaNGaN10.1063/1.2008361 ↗
19. Au-free AlGaN/GaN heterostructure field-effect transistor with recessed overhang ohmic contacts using a Ti/Al bilayer10.1088/0268-1242/30/8/085005 ↗
20. AlGaN/GaN high-electron-mobility transistors fabricated through a Au-free technology10.1109/LED.2011.2114322 ↗
21. Au-free low temperature ohmic contacts for AlGaN / GaN power devices on 200mm Si substrates
22. Impact of Ti/Al atomic ratio on the formation mechanism of non-recessed Au-free Ohmic contacts on AlGaN / GaN heterostructures
23. Leakage-current reduction and improved on-state performance of Au-free AlGaN/GaN-on-Si Schottky diode by embedding the edge terminations in the anode region
24. Performance optimization of Au-free lateral AlGaN / GaN Schottky barrier diode With gated edge Termination on 200-mm silicon substrate10.1109/TED.2016.2515566 ↗
25. Process parameters Influence on specific contact resistance (SCR) value for TiAl Ohmic contacts on GaN grown on sapphire10.4028/www.scientific.net/MSF.615-617.955 ↗