Design of capacitance based on interdigitated electrode for BioMEMS sensor application
Source abstract
Abstract
Abstract In this paper present, an electrostatic actuation mechanism based on the interdigitated electrode for the Biomedical Micro Electro Mechanical Systems (Bio-MEMS) sensors was mainly used for sensing or actuation in analytical and different detection applications. One of the main things interdigitated electrode (IDE) for capacitance derived from multiple electrode pairs has been connected in parallel with wide proof mass, folded spring beam attached as anchor in the sensor construction. The total capacitance was a sum of capacitance contributed by neighbouring electrodes. Hence the opposite walls of comb electrodes in the overlapping region form a parallel plate capacitor and contribute a capacitance C easily analyzed with fringe capacitance can be estimated to analytically difficult one. However, the nearly accurate way to estimate for the fringe capacitance is by using the finite element method (FEM). The major importance of the geometric dimensions on interdigitated electrode sensors are studied with an analytical model. The design of capacitive based IDE sensors are simulated and demonstrated on visualizing of the electrical properties by COMSOL Multiphysics software.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced MEMS and NEMS Technologies · Mechanical and Optical Resonators · Analytical Chemistry and Sensors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (21)
Show source-provided references
1. Simulations of interdigitated electrode interactions with gold nanoparticles for impedance-based biosensing applications10.3390/s150922192 ↗
2. Open-loop versus closed-loop control of MEMS devices: choices and issues10.1088/0960-1317/15/10/018 ↗
3. Capacitance measurements of antibody-antigen interactions in a flow system10.1021/ac970203e ↗
4. Capacitive biosensors10.1002/1521-4109(200103)13:3<173::AID-ELAN173>3.0.CO;2-B ↗
5. Fabrication, characterization and modelling of electrostatic micro-generators
6. Full-Lagrangian schemes for dynamic analysis of electrostatic MEMS10.1109/JMEMS.2004.835773 ↗
7. A hybrid microfluidic/CMOS capacitive sensor dedicated to Lab-on-Chip applications10.1109/TBCAS.2008.915641 ↗
8. Vibration mode frequency formulae for micromechanical scanners10.1088/0960-1317/15/9/013 ↗
9. Calculating capacitance and analyzing nonlinearity of micro-accelerometers by Schwarz–Christoffel mapping10.1007/s00542-013-1955-0 ↗
10. Analysis of electrostatic comb-driven actuators in linear and nonlinear regions10.1016/j.ijsolstr.2004.04.034 ↗
11. A self-calibration water level measurement using an interdigital capacitive sensor10.1016/j.sna.2014.01.040 ↗
12. Interdigitated electrodes as impedance and capacitance biosensors: a review10.1063/1.5002470 ↗
13. Liu · 2011
14. “Local bifurcations of synchronization in self-excited and forced unidirectionally coupled micromechanical resonators”10.1016/j.jsv.2011.10.024 ↗
15. Simulation of electrostatic actuation in interdigitated comb drive MEMS resonator for energy harvester application
16. Comb-drive actuators for large displacements10.1088/0960-1317/6/3/004 ↗
17. Reading and writing operations of memory device in micro-electromechanical resonator10.1587/elex.9.1230 ↗
18. Simulation of nonlinear coupled interdigitated flexible MEMS resonators in different vibrating modes
19. Electrostatic pull-in instability inMEMS/NEMS: a review10.1016/j.sna.2014.04.025 ↗
20. Optimization of MEMS capacitive accelerometer10.1007/s00542-013-1741-z ↗
21. Printed electrodes structures as capactive humidity sensors: a comparison10.1016/j.sna.2016.03.023 ↗