Enhanced thermoelectric performance of hot-press Bi-doped n-type polycrystalline PbS
Source abstract
Abstract
Abstract Lead sulfide (PbS) is a type of promising thermoelectric materials which is consist of elements with high natural abundance. However, the relatively low conversion efficiency limits its further application due to the high lattice thermal conductivity of PbS compared with that of PbTe. It has been widely accepted that nanostructuring and doping are effective ways to enhance the thermoelectric properties. Herein, nano/micro structure Bi doped PbS materials have beensynthesized by a facile method of hydrothermal synthesis. The nano/micro structure material systems exist abundant interface which could scatter mid- and low-frequency phonons effectively, combined with point defect such as Bi–Pb scattering high-frequency phonons, and thus the results show that the lattice thermal conductivity of PbS decreases with the increasing concentration of Bi3+ doping as expected. Moreover, the optimal power factor (PF) can be obtained by tuning the carrier concentration and mobility at the same time. The optimal thermoelectric figure of merit (ZT) can reach 0.89 for Pb0.96Bi0.04S at 773K and rises with the increase of the temperature without sign of saturation. Our work may shed light to further possible and environmentally friendly application of PbS-based thermoelectric materials.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Thermoelectric Materials and Devices · Thermal Radiation and Cooling Technologies · Perfectionism, Procrastination, Anxiety Studies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (38)
Show source-provided references
1. Enhanced thermoelectric performance of Bi2Te3 based graphene nanocomposites10.1016/j.apsusc.2018.10.163 ↗
2. A review on nanostructures of high-temperature thermoelectric materials for waste heat recovery10.1016/j.rser.2016.06.035 ↗
3. Realizing high thermoelectric properties of SnTe via synergistic band engineering and structure engineering
4. Enhanced thermoelectric and mechanical properties in hierarchical tubular porous cuprous selenide10.1016/j.scriptamat.2019.09.009 ↗
5. Theoretical understanding on band engineering of Mn-doped lead chalcogenides PbX (X = Te, Se, S)10.1088/0953-8984/27/9/095501 ↗
6. AgI alloying in SnTe boosts the thermoelectric performance via simultaneous valence band convergence and carrier concentration optimization10.1016/j.jssc.2016.02.012 ↗
7. Thermoelectric properties of Cu2SnSe4 with intrinsic vacancy10.1021/acs.chemmater.6b02416 ↗
8. Carrier concentration dependence of structural disorder in thermoelectric Sn1-xTe10.1107/S2052252516012707 ↗
9. Enhanced thermoelectric performances in BiCuSeO oxyselenides via Er and 3D modulation doping10.1016/j.ceramint.2018.11.130 ↗
10. Revisiting AgCrSe2 as a promising thermoelectric material10.1039/C6CP04791B ↗
11. PbTe-based thermoelectric nanocomposites with reduced thermal conductivity by SiC nanodispersion10.1063/1.4869220 ↗
12. High thermoelectric properties of (Sb, Bi)(2)Te-3 nanowire arrays by tilt-structure engineering10.1016/j.apsusc.2018.02.193 ↗
13. High-performance bulk thermoelectrics with all-scale hierarchical architectures10.1038/nature11439 ↗
14. High ZT in p-type (PbTe)1-2x(PbSe)x(PbS)x thermoelectric materials10.1021/ja4121583 ↗
15. Enhancement of thermoelectric efficiency in PbTe by distortion of the electronic density of states10.1126/science.1159725 ↗
16. Broad temperature plateau for thermoelectric figure of merit ZT>2 in phase-separated PbTe0.7S0.310.1038/ncomms5515 ↗
17. Superior thermoelectric performance in PbTe-PbS pseudo-binary: extremely low thermal conductivity and modulated carrier concentration10.1039/C5EE01147G ↗
18. Nanostructures boost the thermoelectric performance of PbS10.1021/ja109138p ↗
19. High performance thermoelectrics from earth-abundant materials: enhanced figure of merit in PbS by second phase nanostructures10.1021/ja208658w ↗
20. High temperature thermoelectric properties of rock-salt structure PbS10.1016/j.ssc.2013.12.008 ↗
21. Materials for thermoelectric energy conversion10.1088/0034-4885/51/4/001 ↗
22. Thermoelectrics from abundant chemical elements: high-performance nanostructured PbSe-PbS10.1021/ja203022c ↗
23. High-performance thermoelectricity in nanostructured earth-abundant copper sulfides bulk materials10.1002/aenm.201600607 ↗
24. Enhanced thermoelectric properties of p-type nanostructured PbTe-MTe (M = Cd, Hg) materials10.1039/c3ee40482j ↗
25. Nanostructured YbAgCu4 for potentially cryogenic thermoelectric cooling10.1021/nl501436w ↗
26. Ge/SiGe superlattices for nanostructured thermoelectric modules10.1016/j.tsf.2013.01.002 ↗
27. Thermoelectrics with earth abundant elements: high performance p-type PbS nanostructured with SrS and CaS10.1021/ja301772w ↗
28. Raising the thermoelectric performance of p-type PbS with endotaxial nanostructuring and valence-band offset engineering using CdS and ZnS10.1021/ja306527n ↗
29. Enhanced thermoelectric properties of Pb1-xBixS prepared with hydrothermal synthesis and microwave sintering10.1039/C6DT04177A ↗
30. Rapid consolidation of powdered materials by induction hot pressing10.1063/1.3534080 ↗
31. Effects of anion and cation doping on the thermoelectric properties of n-type PbS10.1016/j.jeurceramsoc.2018.03.046 ↗
32. Thermoelectric materials: energy conversion between heat and electricity10.1016/j.jmat.2015.01.001 ↗
33. High thermoelectric efficiency of n-type PbS10.1002/aenm.201200683 ↗
34. Stabilizing the optimal carrier concentration for high thermoelectric efficiency10.1002/adma.201103153 ↗
35. High-performance nanostructured thermoelectric generators for micro combined heat and power systems10.1016/j.applthermaleng.2015.11.064 ↗
36. Low-cost, abundant binary sulfides as promising thermoelectric materials10.1016/j.mattod.2015.10.004 ↗
37. Characterization of Lorenz number with Seebeck coefficient measurement10.1063/1.4908244 ↗
38. Hydrothermal synthesis and thermoelectric properties of PbS10.1515/msp-2016-0098 ↗