journal article·2020-03

Direct growth of FeS2 on paper: A flexible, multifunctional platform for ultra-low cost, low power memristor and wearable non-contact breath sensor for activity detection

Sushmitha Veeralingam, Shivam Khandelwal, Rinky Sha, Sushmee Badhulika

Publisher page

Abstract

Abstract This is the first demonstration of direct growth of iron pyrite (FeS2) via a single step hydrothermal route on low cost, biodegradable, flexible cellulose paper substrate which is further explored as a versatile multifunctional platform for memristor (with top and bottom electrodes) and wearable breath sensor (with planar contacts) which exhibits excellent switching and response respectively. XRD, EDAX studies confirmed the formation of crystalline pyrite FeS2. Memristor device exhibits excellent bipolar resistive switching mechanism at very low set, reset voltages i.e. +0.25 V, −0.5 V with a very low power consumption in the range of few micro to nano watts, decent switching ratio of 4 × 102, good data retention up to 2 × 104 s and excellent switching endurance up to 500 cycles. Furthermore, FeS2 grown on paper displayed excellent response towards exhaled breath exhibiting distinguished response towards oral and nasal breath. The sensor was employed in monitoring the exhaled breath pattern during dynamic movements like walking, running and jumping. The mechanism of sensing can be attributed to the conductivity and hydrophilic nature of sensor aiding in adsorption and desorption of the water molecules from the exhaled breath on to the FeS2 microspheres. The strategy outlined here, presents a low cost approach using iron and its pyrites which are abundant, non-toxic and also cost effective based flexible devices for multifunctional electronic applications.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Memory and Neural Computing · Gas Sensing Nanomaterials and Sensors · Advanced Sensor and Energy Harvesting Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (35)

Show source-provided references
1. Freestanding artificial synapses based on laterally proton‐coupled transistors on chitosan membranes10.1002/adma.201502719 ↗
2. Phosphorene/ZnO nano‐heterojunctions for broadband photonic nonvolatile memory applications10.1002/adma.201801232 ↗
3. Boolean and sequential logic in a one‐memristor‐one‐resistor (1M1R) structure for in‐memory computing10.1002/aelm.201800229 ↗
4. Graphene oxide quantum dots based memristors with progressive conduction tuning for artificial synaptic learning10.1002/adfm.201803728 ↗
5. Layered memristive and memcapacitive switches for printable electronics10.1038/nmat4135 ↗
6. Electronic and optoelectronic applications based on 2D novel anisotropic transition metal dichalcogenides10.1002/advs.201700231 ↗
7. Synthesis and application of iron-based nanomaterials as anodes of lithium-ion batteries and super capacitors10.1039/C8TA01683F ↗
8. Hydrothermal synthesis of FeS2 as a high-efficiency Fenton reagent to degrade alachlor via superoxide-mediated Fe (II)/Fe (III) cycle10.1021/acsami.5b09919 ↗
9. Review on physically flexible nonvolatile memory for internet of everything electronics10.3390/electronics4030424 ↗
10. 2D-SnSe2 nanoflakes on paper with 1D-NiO gate insulator based MISFET as multifunctional NIR photo switch and flexible temperature sensor10.1016/j.mssp.2019.104738 ↗
11. Polymer‐templated hydrothermal growth of vertically aligned single‐crystal ZnO nanorods and morphological transformations using structural polarity10.1002/adfm.201000613 ↗
12. FeS2 grown pencil graphite as an in‐expensive and non‐enzymatic sensor for sensitive detection of uric acid in non‐invasive samples10.1002/elan.201900244 ↗
13. Solvothermal synthesis and electrochemical properties of phase pure pyrite FeS2 for supercapacitor applications10.1016/j.electacta.2018.09.027 ↗
14. Mechanism for bipolar resistive switching memory behaviors of a self-assembled three-dimensional MoS2 microsphere composed active layer10.1063/1.4980173 ↗
15. Synergies of electrochemical metallization and valance change in all‐inorganic perovskite quantum dots for resistive switching10.1002/adma.201800327 ↗
16. On‐demand reconfiguration of nanomaterials: when electronics meets ionics10.1002/adma.201702770 ↗
17. Switchable two‐terminal transparent optoelectronic devices based on 2D perovskite10.1002/aelm.201800662 ↗
18. Organic and hybrid resistive switching materials and devices
19. V2O5 nanosheets for flexible memristors and broadband photodetectors10.1021/acsanm.8b02233 ↗
20. Mechanism for bipolar resistive switching memory behaviors of a self-assembled three-dimensional MoS2 microsphere composed active layer10.1063/1.4980173 ↗
21. Facile fabrication of p (electrodeposition)/n (solvothermal) 2D‐WS2‐homojunction based high performance photo responsive, strain modulated piezo‐phototronic diode10.1002/cnma.201900511 ↗
22. Comparison of apnea detection using oronasal thermal airflow sensor, nasal pressure transducer, respiratory inductance plethysmography and tracheal sound sensor10.5664/jcsm.7634 ↗
23. Diagnosis of the Hypopnea syndrome in the early stage
24. Low cost, flexible and disposable SnSe2 based photoresponsive ammonia sensor for detection of ammonia in urine samples10.1016/j.snb.2019.126725 ↗
25. Breath sensors for health monitoring10.1021/acssensors.8b00937 ↗
26. Wrinkled nitrile rubber films for stretchable and ultra-sensitive respiration sensors10.1016/j.eml.2016.12.003 ↗
27. Oral or nasal breathing? Real-time effects of switching sampling route onto exhaled VOC concentrations10.1088/1752-7163/aa6368 ↗
28. Direct, one step growth of NiSe2 on cellulose paper: a low cost, flexible, wearable with smartphone enabled multifunctional sensing platform for customized non-invasive personal healthcare monitoring10.1021/acsaelm.9b00022 ↗
29. Ab initio density functional studies of transition-metal sulphides: I. Crystal structure and cohesive properties10.1088/0953-8984/9/50/013 ↗
30. Shinde · 2019
31. Preparation of high‐performance ionogels with excellent transparency, good mechanical strength, and high conductivity10.1002/adma.201704253 ↗
32. Ultrafast response polyelectrolyte humidity sensor for respiration monitoring
33. Paper‐based electrical respiration sensor10.1002/anie.201511805 ↗
34. Monitoring of physiological body signals and human activity based on ultra-sensitive tactile sensor and artificial electronic skin by direct growth of ZnSnO3 on silica cloth10.1016/j.mssp.2019.04.020 ↗
35. Flexible, disposable cellulose-paper-based MoS2/Cu2S hybrid for wireless environmental monitoring and multifunctional sensing of chemical stimuli10.1021/acsami.8b00245 ↗