journal article·2018-10

Synthesis of tin and molybdenum co-doped TiO2 nanotube arrays for the photoelectrocatalytic oxidation of phenol in aqueous solution

Xiaoyue Ma, Zhirong Sun, Xiang Hu

Publisher page

Abstract

Abstract Tin and molybdenum co-doped titanium dioxide nanotube arrays was prepared by single-step anodization of titanium plate (Sn-Mo-TiO2 NTs/Ti electrode). The Sn-Mo-TiO2 NTs/Ti electrode was characterized by field emission scanning electron microscopy (FESEM), X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS). The length and inner diameter of nanotubes increased with the increase of anodization voltage. The influences of factors, such as anodization voltage, anodization time, concentrations of Sn4+ and Mo6+, and calcination temperature, on the preparation of the electrode were studied by chronoamperometry under simulated sunlight irradiation. The optical performance of Sn-Mo-TiO2 NTs/Ti electrode was tested by UV–vis spectrophotometer. Sn-Mo-TiO2 NTs/Ti electrode exhibited high adsorption in the visible region relative to pure titanium dioxide nanotube arrays. Additionally, the chronoamperometry test results highlighted that the doping of tin and molybdenum could enhance the photoelectrochemical performance of the electrode. The electrode exhibited good photoelectrocatalytic oxidation capacity on phenol at 0.5 V constant bias voltage. Applied bias voltage enhanced the photocatalytic efficiency of nanotube arrays via promoting the separation of photogenerated electron-hole pairs. A possible degradation process for phenol was proposed.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: TiO2 Photocatalysis and Solar Cells · Advanced Photocatalysis Techniques · Advanced oxidation water treatment

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (60)

Show source-provided references
1. Photoelectrocatalytic degradation of pharmaceutical carbamazepine using Sb-doped Sn80%-W20%-oxide electrodes10.1016/j.seppur.2017.07.007 ↗
2. Synthesis of WO3/BiVO4 photoanode using a reaction of bismuth nitrate with peroxovanadate on WO3 film for efficient photoelectrocatalytic water splitting and organic pollutant degradation10.1016/j.apcatb.2017.05.072 ↗
3. Double quantum dots decorated 3D graphene flowers for highly efficient photoelectrocatalytic hydrogen production10.1016/j.apsusc.2017.05.225 ↗
4. Combination of photoelectrocatalysis and adsorption for removal of bisphenol A over TiO2-graphene hydrogel with 3D network structure10.1016/j.apcatb.2017.08.076 ↗
5. Photoelectric performance of TiO2 nanotube array film of highly transparent vs nontransparent on FTO glass10.1016/j.mssp.2017.07.005 ↗
6. High photocatalytically active cocoons-like TiO2/SiO2 synthesized by hydrothermal process and subsequent calcination at 900 °C10.1016/j.mssp.2017.09.011 ↗
7. Evaluation of transferable TiO2 nanotube membranes as electrocatalyst support for methanol photoelectrooxidation10.1016/j.apcatb.2017.09.019 ↗
8. Photocatalysis on TiO2 surfaces - principles, mechanisms, and selected results10.1021/cr00035a013 ↗
9. The surface science of titanium dioxide10.1016/S0167-5729(02)00100-0 ↗
10. TiO2/PbS/ZnS heterostructure for panchromatic quantum dot sensitized solar cells synthesized by wet chemical route10.1016/j.optmat.2017.09.041 ↗
11. Discrete supertetrahedral CuInS nanoclusters and their application in fabrication of cluster-sensitized TiO2 photoelectrodes10.1039/C7TA00247E ↗
12. Photocatalytic removal of gaseous nitrogen oxides using WO3/TiO2 particles under visible light irradiation: effect of surface modification10.1016/j.chemosphere.2017.05.069 ↗
13. Photo-induced re-modulation of Pt particles loaded on V-TiO2 for enhanced CO photocatalytic oxidation10.1039/C7CY01220A ↗
14. Photodeposition of Pd nanoparticles on TiO2 utilizing a channel type quartz reactor10.1016/j.ceramint.2017.04.096 ↗
15. In situ synthesis of carbon-doped TiO2 single-crystal nanorods with a remarkably photocatalytic efficiency10.1016/j.apcatb.2017.03.008 ↗
16. Fluorine doped anatase TiO2 with exposed reactive (001) facets supported on porous diatomite for enhanced visible-light photocatalytic activity10.1016/j.micromeso.2017.02.053 ↗
17. Preparation, characterization, and giant dielectric permittivity of (Y3+ and Nb5+) co-doped TiO2 ceramics10.1016/j.jeurceramsoc.2017.04.040 ↗
18. Synthesis of two-dimensional nanowall of Cu-Doped TiO2 and its application as photoanode in DSSCs10.1016/j.physe.2017.05.003 ↗
19. Alpha-Fe2O3/TiO2 3D hierarchical nanostructures for enhanced photoelectrochemical water splitting10.1039/C6NR06908H ↗
20. Enhancement of photocatalytic performance with the use of noble-metal-decorated TiO2 nanocrystals as highly active catalysts for aerobic oxidation under visible-light irradiation10.1016/j.apcatb.2017.03.077 ↗
21. Preparation of TiO2/graphene composite with appropriate N-doping ratio for humic acid removal10.1007/s10853-017-1509-4 ↗
22. Dielectric response and room temperature ferromagnetism in Cr doped anatase TiO2 nanoparticles10.1016/j.jmmm.2017.09.051 ↗
23. Electronic structure and photocatalytic activity of N/Mo doped anatase TiO210.1016/j.catcom.2012.10.014 ↗
24. A simple preparation method and characterization of B and N co-doped TiO2 nanotube arrays with enhanced photoelectrochemical performance10.1016/j.apsusc.2017.04.055 ↗
25. Photocatalytic conversion of CO2 to hydrocarbon fuel using carbon and nitrogen co-doped sodium titanate nanotubes10.1016/j.apcata.2015.03.044 ↗
26. Enhanced visible light photocatalytic activity for TiO2 nanotube array films by codoping with tungsten and nitrogen
27. First-principle study of electronic structures and optical properties of chromium and carbon co-doped anatase TiO210.1016/j.ceramint.2016.05.200 ↗
28. Enhanced photocatalytic degradation of humic acids using Al and Fe co-doped TiO2 nanotubes under UV/ozonation for drinking water purification10.1016/j.jhazmat.2013.09.012 ↗
29. Ultrasonic-assisted sol-gel synthesis of samarium, cerium co-doped TiO2 nanoparticles with enhanced sonocatalytic efficiency10.1016/j.ultsonch.2015.02.001 ↗
30. Enhanced efficiency of dye-sensitized solar cells based on Mg and La co-doped TiO2 photoanodes10.1016/j.electacta.2015.07.172 ↗
31. Effect of Sn and La doping on optical and hydrophilic properties of TiO2 thin film10.1007/s11082-016-0677-9 ↗
32. Influence of Mn2+ and Mo6+ dopants on the phase transformations of TiO2 lattice and its photo catalytic activity under solar illumination10.1016/j.catcom.2008.11.041 ↗
33. Enhancing the photoactivity of TiO2 by codoping with silver and molybdenum: the effect of dopant concentration on the photoelectrochemical properties10.1088/2053-1591/aa69a0 ↗
34. Effect of Sn doping on the structural, optical and electrical properties of TiO2 films prepared by spray pyrolysis10.1016/j.physe.2015.09.048 ↗
35. Molybdenum-doped and anatase/rutile mixed-phase TiO2 nanotube photoelectrode for high photoelectrochemical performance10.1016/j.jpowsour.2015.02.017 ↗
36. Preparation of an Mo and C co-doped TiO2 catalyst by a calcination-hydrothermal method, and degradation of rhodamine B in visible light10.1007/s11164-012-0902-5 ↗
37. The optical, photo catalytic behavior and hydrophilic properties of silver and tin co doped TiO2 thin films using sol-gel method10.1007/s10854-016-5958-3 ↗
38. Sn/Ce co-doping of TiO2 nanoparticles: influence of dopants concentration on optical and structural characteristics10.1007/s10854-016-4869-7 ↗
39. Effect of anodization voltage on performance of TiO2 nanotube arrays for hydrogen generation in a two-compartment photoelectrochemical cell10.1016/j.ijhydene.2014.05.115 ↗
40. High-temperature stable anatase-type TiO2 nanotube arrays: a study of the structure–activity relationship10.1016/j.apcatb.2015.11.048 ↗
41. Influence of anodizing voltage mode on the nanostructure of TiO2 nanotubes10.1007/s10008-013-2256-3 ↗
42. Improvement of the photocatalytic properties of TiO2 by (Fe+Mo) co-doping-A possible way to retard the recombination process10.1063/1.4819449 ↗
43. Synthesis and characterization of Sn doped TiO2 photocatalysts: effect of Sn concentration on the textural properties and on the photocatalytic degradation of 2,4-dichlorophenoxyacetic acid10.1016/j.jallcom.2014.12.065 ↗
44. Mo, Mn and La doped TiO2: synthesis, characterization and photocatalytic activity for the decolourization of three different chromophoric dyes10.1016/j.jallcom.2013.06.083 ↗
45. Importance of the relationship between surface phases and photocatalytic activity of TiO210.1002/anie.200704788 ↗
46. Evidence of rutile-to-anatase photo-induced electron transfer in mixed-phase TiO2 by solid-state NMR spectroscopy10.1039/C5CC04971G ↗
47. Synergism between rutile and anatase TiO2 particles in photocatalytic oxidation of naphthalene10.1016/S0926-860X(02)00610-5 ↗
48. Light-induced super-hydrophilicity and photocatalytic activity of mesoporous TiO2 thin films10.1016/S1010-6030(02)00060-6 ↗
49. TiO2 nanoparticles as functional building blocks10.1021/cr400629p ↗
50. Single-step electrochemical anodization for synthesis of hierarchical WO3–TiO2 nanotube arrays on titanium foil as a good photoanode for water splitting with visible light10.1016/j.jelechem.2014.12.030 ↗
51. Preparation and electrochemical properties of SnO2-Sb-Ni-Ce oxide anode for phenol oxidation10.1007/s10008-015-2892-x ↗
52. Novel one-step preparation of tungsten loaded TiO2 nanotube arrays with enhanced photoelectrocatalytic activity for pollutant degradation and hydrogen production10.1016/j.catcom.2013.03.009 ↗
53. Fabrication of Cd0.5Zn0.5S nanoparticles decorated TiO2 nanotube arrays electrode and its enhanced photoelectrocatalytic performance10.1016/j.jallcom.2016.08.260 ↗
54. A novel CeO2-MoO3-WO3/TiO2 catalyst for selective catalytic reduction of NO with NH310.1016/j.catcom.2017.10.002 ↗
55. Sunlight driven high photocatalytic activity of Sn doped N-TiO2 nanoparticles synthesized by a microwave assisted method10.1016/j.ceramint.2017.01.039 ↗
56. Mo-N-co-doped mesoporous TiO2 microspheres with enhanced visible light photocatalytic activity10.1016/j.materresbull.2016.12.041 ↗
57. Sn-Doped TiO2 photoanode for dye-sensitized solar cells10.1021/jp212517k ↗
58. Sn doped TiO2 nanotube with oxygen vacancy for highly efficient visible light photocatalysis10.1016/j.jallcom.2016.04.080 ↗
59. Effect of calcination temperature on Cu doped NiO nanoparticles prepared via wet-chemical method: structural, optical and morphological studies10.1016/j.mssp.2017.04.009 ↗
60. Enhancement of photoelectric and photocatalytic activities: Mo doped TiO2 thin films deposited by sputtering10.1016/j.tsf.2012.07.121 ↗