Sulfurization temperature dependent physical properties of Cu2SnS3 films grown by a two-stage process
Source abstract
Abstract
Abstract Cu2SnS3 (CTS) is a promising absorber for thin film solar cells because of its suitable opto-electronic properties. This article reports the effect of sulfurization temperature (Ts) on the physical properties of CTS thin films deposited by two-stage process. X-ray diffraction and Raman analyses revealed that sulfurized CTS films exhibited different polymorphic forms, such as triclinic structure (at Ts = 350 °C), tetragonal structure (at Ts = 400 °C), and monoclinic structure (at Ts = 450 °C). A phase change from monoclinic CTS to orthorhombic Cu3SnS4 was observed at Ts = 500 °C. The AFM results confirmed that the sulfurized films had the smooth surface without pinholes. The optical band gap was varied in the range, 2.34–1.49 eV with increasing sulfurization temperature from 150 °C to 500 °C. All the sulfurized films showed p-type conducting nature. The obtained results indicated that single phase CTS films prepared in the temperature range of 400–450 °C could be used as an absorber layer for the application of thin film solar cells.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Copper-based nanomaterials and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (44)
Show source-provided references
1. Influence of sulfurization temperature on photovoltaic properties of Ge alloyed Cu2SnS3 (CTGS) thin film solar cells10.1016/j.solmat.2017.08.008 ↗
2. Non-toxic, earth-abundant 2% efficient Cu2SnS3 solar cell based on tetragonal films direct-coated from single metal-organic precursor solution10.1016/j.solmat.2013.02.017 ↗
3. Electrical transport in layer-by-layer solution deposited Cu2SnS3 films: effect of thickness and annealing temperature10.1016/j.apsusc.2014.01.114 ↗
4. Mohite, Cu2SnS3, a new sulfide of tin and copper10.1080/00206818309466683 ↗
5. Photovoltaic characteristics of thin films of Cu2SnS310.1016/0165-1633(87)90019-0 ↗
6. Fabrication of Cu2SnS3 thin-film solar cells with power conversion efficiency of over 4%10.7567/JJAP.54.08KC06 ↗
7. Introduction of Na into Cu2SnS3 thin film for improvement of its photovoltaic performances10.1016/j.solmat.2017.04.040 ↗
8. Cu2Sn1-xGexS3 solar cells fabricated with a graded bandgap structure10.7567/APEX.9.072301 ↗
9. Growth of Cu2SnS3 thin films by solid reaction under sulphur atmosphere10.1016/j.vacuum.2010.10.001 ↗
10. Preparation of Cu2SnS3 thin films by sulfurization of Cu/Sn stacked precursors10.1143/JJAP.51.10NC35 ↗
11. Fabrication of Cu2SnS3 thin film solar cells using pulsed laser deposition technique10.1016/j.solmat.2015.02.031 ↗
12. Investigation of the sulfurization process of Cu2SnS3 thin films and estimation of band offsets of Cu2SnS3 -related solar cell structure10.1002/pssc.201400294 ↗
13. CuxSnSx+1 (x = 2, 3) thin films grown by sulfurization of metallic precursors deposited by dc magnetron sputtering, Phys
14. Cu2SixSn1−xS3thin films prepared by reactive magnetron sputtering for low-cost thin film solar cells10.1088/0256-307X/28/10/108801 ↗
15. Cu2Sn1-xGexS3 (x = 0.17) thin-film solar cells with high conversion efficiency of 6.0%10.7567/APEX.6.045501 ↗
16. Fabrication of highly crystallized Cu2SnS3 thin films through sulfurization of Sn-rich metallic precursors10.1016/j.jallcom.2014.03.014 ↗
17. Influence of composition and annealingon the characteristics of Cu2SnS3 thin films grown by cosputtering at room temperature10.1016/j.tsf.2014.09.023 ↗
18. Effect of sulfurization temperature on propertiesof Cu2SnS3 thin films and solar cells prepared by sulfurization of stacked metallic precursors10.1016/j.mssp.2015.04.026 ↗
19. Fabrication of Cu2SnS3 thin film solar cells using Cu/Sn layered metallicprecursors prepared by a sputtering process10.1016/j.solener.2016.09.041 ↗
20. Fabrication of sputtered deposited Cu2SnS3 (CTS) thin film solar cell with power conversion efficiency of 2.39%10.1016/j.jallcom.2017.01.191 ↗
21. Thin film solar cell using earth abundant Cu2SnS3(CTS) fabricated through spray pyrolysis: influence of precursors10.1016/j.ijleo.2017.06.105 ↗
22. Cu2SnS3 solar cells fabricated by chemical bath deposition-annealing of SnS/Cu stacked layers10.1016/j.solmat.2015.09.017 ↗
23. Facile synthesis of Cu2SnS3 thin films grown by SILAR method: effect of film thickness10.1007/s10854-017-6492-7 ↗
24. Effect of drying temperature on the structural and optical characteristics of Cu2SnS3 thin films synthesized by simple spin coating technique10.1007/s10854-015-3532-z ↗
25. Fabrication of Cu2SnS3 solar cells by screen-printing and high-pressure sintering process10.7567/JJAP.53.05FW01 ↗
26. Transport properties of solution processed Cu2SnS3/AZnO heterostructure for low cost photovoltaics10.1016/j.solmat.2015.06.046 ↗
27. Raman analysis of monoclinic Cu2SnS3 thin films10.1063/1.4712623 ↗
28. CIS-based thin-film PV technology in solar frontier K.K10.1016/j.solmat.2013.09.014 ↗
29. Effect of metal layer stacking order on the growth of Cu2ZnSnS4thin films10.1016/j.apsusc.2016.11.001 ↗
30. X-ray photoelectron and auger spectroscopic studies of Cu2S and CuS10.1007/BF01672333 ↗
31. Formation of Cu2SnS3 thin film by the heat treatment of electrodeposited SnS-Cu layers10.1007/s10854-013-1361-5 ↗
32. A study of ternary Cu2SnS3 and Cu3SnS4 thin films prepared by sulfurizing stacked metal precursors10.1088/0022-3727/43/21/215403 ↗
33. Development of sulphurized SnS thin film solar cells10.1016/j.cap.2015.01.022 ↗
34. Cu2SnS3 and Cu4SnS4 thin films via chemical deposition for photovoltaic application10.1149/1.3384660 ↗
35. Deposition and characterization of Cu2SnS3 thin films by co-evaporation for photovoltaic application10.1016/j.solmat.2015.06.049 ↗
36. Copper tin sulfide (CuxSnSy) thin films evaporated with x = 3,4 atomic ratios: influence of the substrate temperature and the subsequent annealing in sulfur10.1016/j.materresbull.2016.05.015 ↗
37. Studies on chemical bath deposited SnS2 films for Cd-free thin film solar cells10.1016/j.ceramint.2016.11.219 ↗
38. Cu2SnS3 thin films deposited by spin coating route: a promise candidate for low cost, safe and flexible solar cells10.1007/s10854-015-3180-3 ↗
39. Structural optical magnetic properties of Co doped α-MoO3 sprayed thin films10.1016/j.sna.2016.11.032 ↗
40. Roughness parameters10.1016/S0924-0136(02)00060-2 ↗
41. A new procedure to prepare semiconducting ternary compounds from binary buffer materials and vacuum-deposited copper for photovoltaic applications10.1016/j.vacuum.2010.04.002 ↗
42. The effect of substrate temperature, Cu/Sn ratio and post-annealing on the phase-change and properties of Cu2SnS3 film deposited by ultrasonic spray pyrolysis10.1007/s10854-016-4341-8 ↗
43. Fabrication of ternary Cu–Sn–S sulfides by a modified successive ionic layer adsorption and reaction (SILAR) method10.1039/c2jm31669b ↗
44. Fabrication of Cu2SnS3 thin films by sulfurization of evaporated Cu-Sn precursors for solarcells10.1002/pssc.201200866 ↗