Synthesis and characterization of novel oxygenated CdSe window layer for CdTe thin film solar cells
Source abstract
Abstract
Abstract Significant increases in the solar conversion performance of thin film CdS/CdTe solar cells have been realized in recent years by the inclusion of wider gap materials, notably CdS:O, in place of the CdS window layer. Similarly, use of CdSe in combination with CdTe has given yet further increases in current density due to the formation of CdTe1-xSex and the resulting enhanced long wavelength collection. Here we report the synthesis and properties of oxygenated CdSe films and their influence on device performance when included into CdTe solar cells. The CdSe:O films were made by pulsed laser deposition in oxygen at pressures of 0.01 and 0.03 Pa. Optical transmission measurements indicated that oxygenation acts to increase transparency in the 400–750 nm range, and that increased oxygen content acts to increase the apparent absorption threshold slightly. The higher transmission acts to increase the spectral response of CdTe solar cells in the range 350–500 nm compared to CdSe- and CdS-containing control devices. Moreover, the already known advantage of enhanced long wavelength response (850–910 nm) over that of CdS/CdTe is retained for both CdSe and CdSe:O window layers. Hence the use of CdSe:O as a window layer is demonstrated to increase the current harvesting of these solar cells by increasing both their long and short wavelength performances. These gains in the short circuit current outweigh small losses in fill factor and open circuit voltage making CdSe:O a valuable possible means to increase the performance of CdTe solar cells.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Perovskite Materials and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (23)
Show source-provided references
1. See 〈http://investor.firstsolar.com/releasedetail.cfm?〉 Release ID=828273 for First Solar press release.
2. CdTe solar cells with open-circuit voltage breaking the 1 V barrier
3. Enhancing the photo- currents of CdTe thin-film solar cells in both short and long wavelength regions10.1063/1.4901532 ↗
4. A.V. Kokate, U.B. Suryavanshi, C.H. Bhosale, Structural, compositional, and optical properties of electrochemically deposited stoichiometric CdSe thin films from non-aqueous bath, in: Proceedings of International Symposium on Solar Cells and Solar Energy Materials held at the Mexican-Academy-of-Materials-Science Annual Meeting, 80, 2006, pp. 156–160.10.1016/j.solener.2005.04.013 ↗
5. Influence of CdS window layer on 2-μm thick CdS/CdTe thin film solar cells10.1016/S0927-0248(02)00154-X ↗
6. M. Simurda, P. Nemec, Morphology of CdSe films prepared by chemical bath deposition: the role of substrate, in: Proceedings of Symposium on Thin Film and Nanostructured Materials for Photovoltaics held at the 2005 EMRS Meeting, 511, 2005, pp. 71–75.10.1016/j.tsf.2005.11.093 ↗
7. Synthesis of cadmium selenide thin films at low-temperature by simple chemical route and their characterization10.1016/j.jpcs.2006.07.006 ↗
8. Current enhancement of CdTe-based solar cells10.1109/JPHOTOV.2015.2458040 ↗
9. S. Sorokin, T. Shubina, Peculiarities of migration-enhanced-epitaxy (MEE) versus molecular beam epitaxy (MBE) growth kinetics of CdSe fractional monolayers in ZnSe, in: Proceedings of the 10th International Conference on Molecular Beam Epitaxy (MBE-X), 201, 1999, pp. 461–464.10.1016/S0022-0248(98)01376-1 ↗
10. Morphological, structural, compositional properties and IR-spectroscopy of CdSe films deposited by close-spaced vacuum sublimation Opanasyuk A S10.1016/j.vacuum.2015.04.036 ↗
11. Development of pulsed laser deposition for CdS/CdTe thin film solar cell10.1063/1.4759116 ↗
12. Preparation and characterization of pulsed laser deposited CdTe thin films at higher FTO substrate temperature and in Ar+O-2 atm10.1016/j.mseb.2013.03.018 ↗
13. Study of Ar+O-2 deposition pressures on properties of pulsed laser deposited CdTe thin films at high substrate temperature
14. The large-area CdTe thin film for CdS/CdTe solar cell prepared by physical vapor deposition in medium pressure10.1016/j.apsusc.2015.11.058 ↗
15. 12% efficientCdTe/CdS thin film solar cells deposited by low-temperature close space sublimation10.1063/1.3639291 ↗
16. A study of vapor CdCl2 treatment by CSS in CdS/CdTe solar cells10.1016/j.solener.2010.03.010 ↗
17. Effects of CdCl2 heattreatmenton the morphological and chemical properties ofCdTe/CdS thin films solar cells10.1016/j.apsusc.2012.03.020 ↗
18. Properties of reactively sputtered oxygenated cadmium sulfide (CdS:O) and their impact on CdTe solar cell performance10.1116/1.4903214 ↗
19. The effects of high temperature processing on the structural and optical properties of oxygenated CdS window layers in CdTe solar cells10.1063/1.4891235 ↗
20. Effects of oxygen partial pressure, deposition temperature, and annealing on the optical response of CdS:O thin films as studied by spectroscopic ellipsometry10.1063/1.4955076 ↗
21. Effect of deposition power in fabrication of highly efficient CdS:O/CdTe thin film solar cell by the magnetron sputtering technique10.1016/j.mssp.2015.06.052 ↗
22. Backcontact CdSe/CdTe windowless solar cells10.1016/j.solmat.2012.11.007 ↗
23. Structural and compositional dependence of the CdTexSe1-x alloy layer photoactivity in CdTe-based solar cells10.1038/ncomms12537 ↗