Concentrated solar thermal energy harvesting using Bi2Te3based thermoelectric generator
Source abstract
Abstract
Abstract This paper presents the harvesting of concentrated solar thermal energy using Bismuth telluride (Bi2Te3) based thermoelectric generator. An experimental setup was made which consist of Fresnel lens which concentrates the solar thermal energy and makes to fall on the 4 × 4 cm2 Bi2Te3 based thermoelectric generator hot side. Aluminum fins are provided on the other side of TEG. Openings are filled with nanoAl2O3 -OM35PCM composite material. PCM is mixed with nanoparticles to increase the thermal conductivity of PCM. Due to the temperature difference between the hot and the cold side of TEG,a voltage is generated. A greatest of 0.615 V is generated with a hot side temperature of 140 °C and cold side temperature of 44 °C in the day time. The maximum current developed by a single TEG is about 84.9 mA in the day time. During the day time, the Nano-PCM mixture changes its phase from solid to liquid and stores heat energy. During the night, heat energy stored in the nano-PCM mixture releases and its phase changes from liquid to solid. During this process, it will create a temperature difference between the top side and bottom side of the TEG resulting voltage across the TEG. The maximum voltage generated during the night is 89 mV. Thus day and night energy harvesting are obtained using thermoelectric and latent heat effects.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Thermoelectric Materials and Devices · Innovative Energy Harvesting Technologies · Thermal Radiation and Cooling Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (15)
Show source-provided references
1. Nanocrystalline Bi2Te3 thin films synthesized by electrodeposition method for photoelectrochemical application10.1016/j.mssp.2018.02.002 ↗
2. Fabrication of Microstructured thermoelectric Bi2Te3 thin films by seed layer assisted electrodeposition10.1016/j.mssp.2016.01.014 ↗
3. Review Nanostructured thermoelectric materials: current research and future challenge10.1016/j.pnsc.2012.11.011 ↗
4. Bi2Te3-Based fleixble micro Thermoelectric Generator with optimized design
5. Ultrasonic –assisted hot pressing of Bi2Te3- based thermoelectric materials10.1016/j.mssp.2018.07.019 ↗
6. Experimental investigation of thermoelectric generator(TEG) with PCM module10.1016/j.applthermaleng.2015.12.005 ↗
7. Experimental investigation of freecing and melting characteristics of Graphene based phase change nanocomposite for cold thermal energy storage application10.3390/app9061099 ↗
8. Solar micro energy harvesting based on thermoelectric and latent heat effects. Part I: theoretical analysis10.1016/j.sna.2010.06.026 ↗
9. An Introduction to Phase Change Material as Heat Storage Mediums ThomashasenÖhrl [Dept of Energy Sciences, Faculty of Engineering, Lund University, Box ,22100Lund, Sweden].
10. A novel thermal energy storage system in smart Building Based on phase change material10.1109/TSG.2018.2812160 ↗
11. TECHNICAL DATA SHEET OF savE® OM35.
12. Jensak Eakburanawat, Itsda Boonyaroonate “Development of a Thermoelectric Battery-Charger with Microcontroller-Based Maximum Power Point Tracking Technique ”, https://doi.org/10.1016/j.apenergy.2005.06.004.10.1016/j.apenergy.2005.06.004 ↗
13. Optimization of a thermoelectric generator for heavy –duty vehicles10.1016/j.enconman.2018.10.045 ↗
14. Combined solar concentration and carbon nanotube absorber for high performance solar thermoelectric generators10.1016/j.enconman.2018.12.104 ↗
15. High-performance terrestrial solar thermoelectric generators without optical concentration for residential and commercial rooftops10.1016/j.enconman.2019.05.089 ↗