Critical investigation on Cu-O bonding configuration variation in copper-oxide thin films for low-cost solar cell applications
Source abstract
Abstract
Abstract The present work provides a detailed investigation on how Copper-Oxygen bonding configuration varies with the plasma processing parameters. XRD, FTIR, XPS and Raman spectroscopy is extensively used to identify and study the phases and phase changes in the films. The Copper-Oxygen bonding configuration was altered by varying the RF power and substrate temperature. We studied the combined effect of both RF power and substrate temperature on the Cu-O bonding configuration, which in turn affects the optical and electrical properties, which are essential to understand before the device fabrication. Films were deposited with 40, 60 and 80 W of RF power at the different growth temperatures such as RT(room temperature), 200 °C and 400 °C. Even the RT deposited films were found to be exhibiting the crystalline nature to the maximum extent. We observed a wide range of variation in the Cu-O bonding configurations with the RF power and growth temperature. Films deposited at 80 W are leaning towards Cu2O phase, whereas films deposited with 40 W is close to CuO phase. Also it is found that, for a fixed power, the films deposited at high substrate temperature are leaning towards Cu2O Phase.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Copper-based nanomaterials and applications · ZnO doping and properties · Semiconductor materials and devices
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (33)
Show source-provided references
1. Binary copper oxide semiconductors: from materials towards devices
2. Interface stoichiometry control to improve device voltage and modify band alignment in ZnO/Cu2O heterojunction solar cells10.1039/C4EE01956C ↗
3. Cu2O nanowire photocathodes for efficient and durable solar water splitting10.1021/acs.nanolett.5b04929 ↗
4. Tetrafunctional Cu2S thin layers on Cu2O nanowires for efficient photoelectrochemical water splitting10.1007/s12274-017-1769-y ↗
5. Carbon coated Cu2O nanowires for photo-electrochemical water splitting with enhanced activity
6. Si-H induced synthesis of Si/Cu2O nanowire arrays for photoelectrochemical water splitting
7. Optimization of photoelectrochemical performance in Pt-modified p-Cu2O/n-Cu2O nanocomposite10.1088/1361-6528/aaac01 ↗
8. Cu2O/CuO bilayered composite as a high-efficiency photocathode for photoelectrochemical hydrogen evolution reaction10.1038/srep35158 ↗
9. Hydrogen evolution by a photoelectrochemical cell based on a Cu2O-ZnO-[FeFe] hydrogenate electrode10.1016/j.jphotochem.2018.01.035 ↗
10. Deposition of copper oxide films by reactive laser ablation of copper formate in an r.f. oxygen plasma ambient10.1016/0040-6090(94)90101-5 ↗
11. T.J. Richardson, J.L. Slack, M.D. Rubin, Electrochromism of copper oxide thin films, in: Proceedings of the 4th International Meeting on Electrochromism, Uppsala, 2000.
12. Optical characterization of thin thermal oxide films on copper by ellipsometry10.1007/s003390100989 ↗
13. Photoelectrochemical properties of copper oxide thin films coated on an n-Si substrate10.1016/S0040-6090(00)01058-0 ↗
14. Copper oxide thin-film growth using an oxygen plasma source10.1116/1.576425 ↗
15. Cuprite, paramelaconite and tenorite films deposited by reactive magnetron sputtering10.1016/S0169-4332(03)00108-9 ↗
16. Nitrogen states in Ga(As,P) and the long-range, short-range model: a systematic study10.1103/PhysRevB.21.3478 ↗
17. Thin-film deposition of Cu2O by reactive radio-frequency magnetron sputtering10.1143/JJAP.39.L786 ↗
18. Optical properties of transparent nanocrystalline Cu2O thin films synthesized by high pressure gas sputtering10.1016/S0965-9773(99)00336-0 ↗
19. Preparation of copper oxide thin film by the sol-gel-like dip technique and study of their structural and optical properties10.1016/S0927-0248(00)00364-0 ↗
20. Electrical and optical properties of copper oxide films prepared by rf magnetron sputtering10.1002/pssa.2211550213 ↗
21. The influence of rf power and oxygen flow rate during deposition
22. Optical and structural properties of nanocrystalline copper oxide thin films prepared by activated reactive evaporation10.1016/S0040-6090(01)01216-0 ↗
23. Thermal conversion of Cu4O3into CuO and Cu2Oand the electrical properties of magnetron sputtered Cu4O3thin films10.1007/s00339-018-1666-6 ↗
24. Properties of reactively-sputtered copper oxide thin films10.1016/0040-6090(79)90504-2 ↗
25. Critical investigation on hydrogen bonding by Fourier Transform Infrared spectroscopy in hydrogenated amorphous silicon thin films10.1016/j.jnoncrysol.2013.04.062 ↗
26. The influence of bias sputter parameters on thick copper coatings deposited using a hollow cathode10.1016/0040-6090(77)90135-3 ↗
27. Hoffman · Thin Solid Films · 1977 · 45 · 38710.1016/0040-6090(77)90276-0 ↗
28. Beldi · J. Non-Cryst. Solids · 1993 · 164 · 30910.1016/0022-3093(93)90552-9 ↗
29. Mikio · J. Non-Cryst. Solids · 1983 · 59 · 823
30. Peter · J. Non-Cryst. Solids · 2002 · 299 · 128
31. On the quality of Hyderogenated amorphous silicon deposited by sputtering10.1016/j.mssp.2014.05.021 ↗
32. Kern · 1978
33. Kern · 1993