Post-deposition annealing effect on In2S3 thin films deposited using SILAR technique
Source abstract
Abstract
Abstract Indium Sulfide thin films have been deposited on glass substrate using a simple and inexpensive technique viz., successive ionic layer adsorption and reaction (SILAR). The films are characterized using X-ray diffraction, X-ray photoelectron spectroscopy (XPS) and optical absorption techniques. Samples are prepared by varying dipping and rinsing time, and those prepared at room temperature are found to be amorphous in nature. However, peaks corresponding to β-In2S3 are observed, on annealing at 400 °C. Grain size is found to increase with increase in the dipping times, either in the precursor solutions or in water. Band gap decreases considerably for samples annealed at 400 °C in vacuum.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Quantum Dots Synthesis And Properties · Chalcogenide Semiconductor Thin Films · Semiconductor materials and interfaces
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (24)
Show source-provided references
1. MOCVD of group III chalcogenides10.1002/amo.860050502 ↗
2. Large area Cd-free CIGS solar modules with In2S3 buffer layer deposited by ALCVD10.1016/j.tsf.2003.10.090 ↗
3. n-Type In2S3 thin films prepared by gas chalcogenization of metallic electroplated indium: photoelectrochemical characterization10.1016/0165-1633(88)90017-2 ↗
4. On the conduction mechanism in single crystal β-indium sulfide In2S310.1016/0022-3697(65)90114-9 ↗
5. Chemical bath deposition of indium sulphide thin films: preparation and characterization10.1016/S0040-6090(98)00980-8 ↗
6. Studies on structural, optical and electrical properties of indium sulfide thin films10.1016/S0254-0584(02)00194-3 ↗
7. Single-source organometallic chemical vapour deposition process for sulphide thin films: Introduction of a new organometallic precursor BunIn(SPri)2 and preparation of In2S3 thin films10.1016/0040-6090(91)90351-W ↗
8. Acoustic properties of β-In2S3 thin films prepared by spray10.1143/JJAP.38.26 ↗
9. Structural and photoelectrical properties of sprayed β-In2S3 thin films10.1002/1521-396X(200010)181:2<427::AID-PSSA427>3.0.CO;2-P ↗
10. Electrical properties of β-In2S3 thin films10.1088/0953-8984/10/26/019 ↗
11. Valence band densities of states of CdIn2S4 and In2S3 from X-ray photoelectron spectroscopy10.1016/0038-1098(78)90490-8 ↗
12. Growth of In2S3 thin films by atomic layer epitaxy10.1016/0169-4332(94)90206-2 ↗
13. A novel cadmium free buffer layer for Cu(In,Ga)Se2 based solar cells10.1016/0927-0248(96)80009-2 ↗
14. An 11.4% efficient polycrystalline thin film solar cell based on CuInS2 with a Cd-free buffer layer10.1016/0927-0248(95)00069-0 ↗
15. Solution deposition of thin solid compound films by a successive ionic-layer adsorption and reaction process10.1016/0378-5963(85)90241-7 ↗
16. Moulder · 1992
17. Vapour and flux growth of γ-In2S3, a new modification of indium sesquisulphide10.1016/0022-0248(73)90034-1 ↗
18. Characterisation of spray pyrolysed indium sulfide thin films10.1088/0268-1242/18/6/317 ↗
19. Teny Theresa John, Bini S, Sudha Kartha C, Vijayakumar KP, Abe T, Kashiwaba Y. Characterization of spray pyrolysed β-In2S3 thin films with different In/S ratio. In: International symposium on recent advances in inorganic materials proceedings, 2004. p. 106.
20. Optical and electrical properties of indium monosulfide (InS) thin films10.1016/S0042-207X(01)00363-3 ↗
21. The conduction mechanism and thermoelectric phenomenon in In6S7 layer crystals10.1088/0268-1242/12/9/007 ↗
22. Optical gaps of β-In2S3 thin films grown by spray pyrolysis10.1063/1.337137 ↗
23. Recent studies on In2S3 containing oxygen thin films10.1016/S0038-1098(02)00099-6 ↗
24. Organothermal synthesis and characterization of nanocrystalline β-indium sulfide10.1111/j.1551-2916.1999.tb20086.x ↗