Ambient annealing influence on surface passivation and stoichiometric analysis of molybdenum oxide layer for carrier selective contact solar cells
Source abstract
Abstract
Abstract Effective carrier contact with excellent surface passivation is essential for archiving high efficiency silicon solar cells. In this study, optical, passivation and stoichiometric characteristics of MoOx thin films were analyzed by varying thickness, temperature and ambient annealing. The 10 nm thick MoOx films showed high optical transmittance (89.81%) in the visible near infra-red (NIR) wavelength (380–1100) nm region and wide optical bandgap of 3.25 eV. An improved minority carrier lifetime of 2.24 ms was recorded for O2 ambient at 130 °C due to less additional defects in the MoOx films. X-rays photoelectron spectroscopic analysis confirmed that O2 ambient annealing greatly influenced the MoOx stoichiometric and reduce the formation defective state densities at the Fermi energy initiating from the tail of an oxygen vacancy and inducted the defect band within the energy bandgap. Carrier selective contact (CSC) solar cells were fabricated by using 10 nm thick MoOx film as hole extraction layer exhibited the high performance as; open circuit voltage (Voc) = 708 mV, current density (Jsc) = 37.80 mA/cm2, fill factor (FF) = 74.95% and efficiency (η) = 20.06%. These results implies that the MoOx is an important material to use in future CSC solar cell applications with the concept of new advantages such as dopant free, non-toxic and low temperature fabrication process.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Silicon and Solar Cell Technologies · Semiconductor materials and interfaces · Thin-Film Transistor Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (52)
Show source-provided references
1. Dopant‐free and carrier‐selective heterocontacts for silicon solar cells: recent advances and perspectives10.1002/advs.201700547 ↗
2. Efficient silicon solar cells with dopant-free asymmetric heterocontacts10.1038/nenergy.2015.31 ↗
3. Recent advances and remaining challenges in thin-film silicon photovoltaic technology10.1016/j.mattod.2015.03.002 ↗
4. Passivating contacts for crystalline silicon solar cells: from concepts and materials to prospects10.1109/JPHOTOV.2018.2797106 ↗
5. Influence of high work function ITO:Zr films for the barrier height modification in a-Si:H/c-Si heterojunction solar cells10.1016/j.solmat.2013.11.031 ↗
6. RF magnetron sputtered ITO:Zr thin films for the high efficiency a-Si:H/c-Si heterojunction solar cells10.1007/s12540-014-3001-x ↗
7. Highly transparent RF magnetron-sputtered indium tin oxide films for a-Si:H/c-Si heterojunction solar cells amorphous/crystalline silicon10.1016/j.mssp.2014.02.044 ↗
8. Y.-.H. Chen, J.-.C. Liu, L. Yung-Tsung, C.-.C. Lin, Hit solar cell, Google Patents, 2015.
9. Twenty-two percent efficiency HIT solar cell10.1016/j.solmat.2008.02.037 ↗
10. Silicon heterojunction solar cell with interdigitated back contacts for a photoconversion efficiency over 26%10.1038/nenergy.2017.32 ↗
11. Current losses at the front of silicon heterojunction solar cells10.1109/JPHOTOV.2011.2174967 ↗
12. Nanocrystalline silicon carrier collectors for silicon heterojunction solar cells and impact on low-temperature device characteristics10.1109/JPHOTOV.2016.2604574 ↗
13. Nature of doped a-Si: H/c-Si interface recombination10.1063/1.3129578 ↗
14. ITO/MoOx/a-Si: H (i) hole-selective contacts for silicon heterojunction solar cells: degradation mechanisms and cell integration10.1109/JPHOTOV.2017.2756066 ↗
15. M. Bivour, M. Reusch, F. Feldmann, M. Hermle, S. Glunz, Requirements for carrier selective silicon heterojunctions. In: Proceedings of the 24th Workshop on Crystalline Silicon Solar Cells & Modules: Materials and Processes, Breckenridge, Colorado, 2014.
16. Carrier-selective contacts for Si solar cells10.1063/1.4875904 ↗
17. The effect of doping density and injection level on minority-carrier lifetime as applied to bifacial dendritic web silicon solar cells10.1109/16.2417 ↗
18. Silicon solar cells with bifacial metal oxides carrier selective layers10.1016/j.nanoen.2017.07.014 ↗
19. 22.5% efficient silicon heterojunction solar cell with molybdenum oxide hole collector10.1063/1.4928747 ↗
20. MoOx modified ITO/a-Si: H (p) contact for silicon heterojunction solar cell application10.1016/j.materresbull.2017.09.005 ↗
21. Silicon heterojunction solar cell with passivated hole selective MoOx contact10.1063/1.4868880 ↗
22. Molybdenum oxide MoOx: a versatile hole contact for silicon solar cells10.1063/1.4903467 ↗
23. Thin-film metal oxides in organic semiconductor devices: their electronic structures, work functions and interfaces10.1038/am.2013.29 ↗
24. Molybdenum oxide: a superior hole extraction layer for replacing p-type hydrogenated amorphous silicon with high efficiency heterojunction Si solar cells
25. Detrimental effects of oxygen vacancies in electrochromic molybdenum oxide10.1021/acs.jpcc.5b02609 ↗
26. Physical properties of evaporated molybdenum oxide films10.1016/0040-6090(96)08617-8 ↗
27. Characterization of reactively sputtered molybdenum oxide films for solar cell application10.1063/1.4812587 ↗
28. Simulation of an efficient silicon heterostructure solar cell concept featuring molybdenum oxide carrier‐selective contact10.1002/er.3947 ↗
29. Hole-collection mechanism in passivating metal-oxide contacts on Si solar cells: insights from numerical simulations10.1109/JPHOTOV.2018.2796131 ↗
30. Bifunctional hybrid a-SiOx (Mo) layer for hole-selective and interface passivation of high efficient MoOx/a-SiOx (Mo)/n-Si heterojunction photovoltaic device
31. Surface charge transfer doping induced inversion layer for high-performance graphene/silicon heterojunction solar cells10.1039/C6TA07100G ↗
32. Requirements for efficient hole extraction in transition metal oxide-based silicon heterojunction solar cells10.1063/1.5045250 ↗
33. Optical bandgap of single- and multi-layered amorphous germanium ultra-thin films10.1063/1.4939296 ↗
34. Synthesis and characterization of flash-evaporated MoO3 thin films10.1016/0022-0248(95)00269-3 ↗
35. V. Nirupama, M. Chandrasekhar, P. Radhika, B. Sreedhar, S. Uthanna, Characterization of molybdenum oxide films prepared by bias magnetron sputtering, 2009.
36. Optical absorption studies in molybdenum trioxide thin films10.1002/pssa.2211480114 ↗
37. Engineered nanomaterials for solar energy conversion10.1088/0957-4484/24/4/042001 ↗
38. The effect of emitter recombination on the effective lifetime of silicon wafers10.1016/S0927-0248(98)00179-2 ↗
39. Measuring and interpreting the lifetime of silicon wafers10.1016/j.solener.2003.07.033 ↗
40. Low surface recombination in silicon-heterojunction solar cells with rear laser-fired contacts from aluminum foils10.1109/JPHOTOV.2015.2411055 ↗
41. Transition metal oxides as hole-selective contacts in silicon heterojunctions solar cells10.1016/j.solmat.2015.08.028 ↗
42. Surface spectroscopic study of tungsten-alumina catalysts using x-ray photoelectron, ion scattering, and Raman spectroscopies10.1021/j150624a035 ↗
43. Systematic XPS studies of metal oxides, hydroxides and peroxides10.1039/a908800h ↗
44. Removal of native silicon oxide with low‐energy argon ions10.1063/1.349160 ↗
45. XPS studies of active elements surface of gas sensors based on WO3−x nanoparticles10.1016/j.elspec.2006.12.059 ↗
46. The influence of hydrogenation and oxygen vacancies on molybdenum oxides work function and gap states for application in organic optoelectronics10.1021/ja3026906 ↗
47. In situ x-ray photoelectron emission analysis of the thermal stability of atomic layer deposited WOx as hole-selective contacts for Si solar cells10.1116/1.5020339 ↗
48. Chromium trioxide hole-selective heterocontacts for silicon solar cells10.1021/acsami.8b02878 ↗
49. Tantalum oxide electron-selective heterocontacts for silicon photovoltaics and photoelectrochemical water reduction10.1021/acsenergylett.7b01153 ↗
50. Dopant-free hydrogenated amorphous silicon thin-Film solar cells using molybdenum oxide and lithium fluoride10.1021/jp4031656 ↗
51. Front and back TCO research review of a-Si/c-Si Heterojunction with Intrinsic Thin Layer (HIT) Solar Cell
52. M.A. Sen, P. Spinelli, B. Kikkert, E. Hoek, B. Macco, A. Weeber, P. Bronsveld, Electron beam evaporated molybdenum oxide as hole-selective contact in 6-inch c-Si heterojunction solar cells, in: AIP Conference Proceedings, AIP Publishing, 2018, p. 040001.10.1063/1.5049264 ↗