Effects of the surface morphologies of ZnO nanotube arrays on the performance of amperometric glucose sensors
Source abstract
Abstract
Abstract Amperometric glucose sensors have been fabricated with glucose oxidase (GOx) immobilized on ZnO nanotubes (ZnONTs) by physical adsorption. The ZnONTs were formed through selective dissolution of ZnO nanorods (ZnONRs) which were hydrothermally synthesized on Au cylindrical spiral (AuCS) electrodes. With the etching temperature regulated, the surface morphologies of the ZnONT arrays were tailored and their effects on the performance of the corresponding glucose sensors were investigated. It is found that at 65 °C the as-prepared ZnONT arrays show a Gaussian rough surface with larger surface area and better hydrophilicity, and have an effective solid–liquid interface with GOx solution, which further results in desirable GOx immobilization. Therefore favorable performance of the ZnONT-based glucose sensor was obtained, such as the sensitivity 2.63 μA/(mM cm2), linear range 0–6.5 mM, low detection limit 8 μM (S/N=3) and Michaelis-Menten constant 5.24 mM, which are superior to that of the ZnONR-based one. Moreover, the ZnONT-based glucose sensor exhibits good long-term stability, and excellent anti-interference ability to uric acid and ascorbic acid. The results can also be used for the performance optimization and the process standardization of other ZnONT-based amperometric biosensors.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electrochemical sensors and biosensors · Analytical Chemistry and Sensors · Conducting polymers and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (31)
Show source-provided references
1. A flexible electrochemical glucose sensor with composite nanostructured surface of the working electrode10.1016/j.snb.2016.02.115 ↗
2. Separation-free electrochemical immunosensor for rapid determination of atrazine10.1016/S0956-5663(98)00008-6 ↗
3. A highly sensitive enzyme-free glucose sensor based on Co3O4 nanoflowers and 3D graphene oxide hydrogel fabricated via hydrothermal synthesis10.1016/j.snb.2015.09.009 ↗
4. Direct electrochemistry of glucose oxidase immobilized on nanostructured gold thin films and its application to bioelectrochemical glucose sensor10.1016/j.electacta.2012.02.011 ↗
5. Highly selective wide linear-range detecting glucose biosensors based on aspect-ratio controlled ZnO nanorods directly grown on electrodes10.1016/j.snb.2012.08.011 ↗
6. A fast and sensitive potentiometric glucose microsensor based on glucose oxidase coated ZnO nanowires grown on a thin silver wire10.1016/j.snb.2009.12.072 ↗
7. Enzymatic glucose biosensor based on ZnO nanorod array grown by hydrothermal decomposition10.1063/1.2356307 ↗
8. An amperometric glucose biosensor based on the immobilization of glucose oxidase on the ZnO nanotubes10.1016/j.snb.2009.01.002 ↗
9. A glucose oxidase immobilization platform for glucose biosensor using ZnO hollow nanospheres10.1016/j.snb.2010.12.040 ↗
10. An intracellular glucose biosensor based on nanoflake ZnO10.1016/j.snb.2010.08.021 ↗
11. Zinc oxide nanocomb biosensor for glucose detection10.1063/1.2210078 ↗
12. Aligned ZnO nanorods: a useful film to fabricate amperometric glucose biosensor10.1016/j.colsurfb.2009.07.011 ↗
13. Improved glucose electrochemical biosensor by appropriate immobilization of nano-ZnO10.1016/j.colsurfb.2010.08.034 ↗
14. Functionalised zinc oxide nanotube arrays as electrochemical sensors for the selective determination of glucose10.1049/mnl.2011.0310 ↗
15. Effects of etching parameters on ZnO nanotubes evolved from hydrothermally synthesized ZnO nanorods10.1016/j.ceramint.2015.11.164 ↗
16. Recent developments in nanostructure based electrochemical glucose sensors10.1016/j.talanta.2015.11.033 ↗
17. ZnO Nanotube Arrays as Biosensors for Glucose10.1021/jp901894j ↗
18. Investigation on chemical etching process of ZnO nanorods toward nanotubes10.1016/j.jallcom.2009.03.013 ↗
19. Regulating the hydrothermal synthesis of ZnO nanorods to optimize the performance of spirally hierarchical structure-based glucose sensors10.1039/C5RA15346H ↗
20. Electrochemica/chemical synthesis of highly-oriented single-crystal ZnO nanotube arrays on transparent conductive substrates10.1016/j.elecom.2007.09.019 ↗
21. Roughness optimization for biomimetic superhydrophobic surfaces10.1007/s00542-005-0602-9 ↗
22. Tailoring the wetting behavior of zinc oxide films by using alkylsilane self-assembled monolayers10.1016/j.spmi.2007.04.018 ↗
23. Potentiometric glucose sensor based on the glucose oxidase immobilized iron ferrite magnetic particle/chitosan composite modified gold coated glass electrode10.1016/j.snb.2012.07.074 ↗
24. Highly conductive graphite nanoparticle based enzyme biosensor for electrochemical glucose detection10.1016/j.snb.2013.12.045 ↗
25. Immobilization of glucose oxidase on electrodeposited nickel oxide nanoparticles: direct electron transfer and electrocatalytic activity10.1016/j.bios.2007.02.002 ↗
26. Graphene bridged enzyme electrodes for glucose biosensing application10.1039/c3an36929c ↗
27. Bio-sensing property of gold coated ZnO nanorods10.1016/j.matlet.2013.11.102 ↗
28. Low-temperature fabrication of ZnO nanorods/ferrocenyl–alkanethiol bilayer electrode and its application for enzymatic glucose detection10.1016/j.bios.2013.08.004 ↗
29. Amperometric glucose biosensor based on silver nanowires and glucose oxidase10.1016/j.snb.2012.08.077 ↗
30. Fabrication of glucose oxidase/polypyrrole biosensor by galvanostatic method in various pH aqueous solutions10.1016/S0956-5663(03)00168-4 ↗
31. A novel amperometric biosensor based on ZnO:Co nanoclusters for biosensing glucose10.1016/j.bios.2007.03.014 ↗