journal article·2025-12Open access

Construction of mesoporous CeO2/ZnO composite abrasives with heterogeneous structure and application to photochemical mechanical polishing (PCMP) of quartz glass

Ning Xu, Kailong Gao, Yu Lin, Yu Huo, Ziheng Gao, Yansong Wang, Guosheng Zhang, Zhuo Wang

Abstract

In this work, mesoporous CeO 2 /ZnO composite abrasives with a heterogeneous structure were constructed by a two-step hydrothermal method and applied to a photochemical mechanical polishing (PCMP) system. Characterization of morphology, structure, and properties of mesoporous CeO 2 /ZnO composite abrasives by XRD, SEM, TEM, Raman, BET, XPS, and PL spectroscopy. To discuss the removal mechanism of materials by the synergistic effect between the chemical-mechanical behavior of mesoporous CeO 2 /ZnO composite abrasives and photocatalytic oxidation. The elastic deformation ability of the mesoporous CeO 2 matrix can reduce the generation of mechanical scratches. The loading of ZnO leads to the enhancement of Ce 3+ and oxygen vacancies in the CeO 2 lattice, which increases the active sites during polishing and promotes the generation of chemical bonding of Ce-O-Si. The type-II heterostructure formed by CeO 2 /ZnO enhances the photogenerated carrier separation efficiency and accelerates the generation of oxidatively active groups and the formation of hydrated layers on the surface of silicon-based materials. The combined effect of all three makes it possible to achieve efficient material removal and a high-quality surface for quartz glass in the PCMP process. The experimental results showed that the mesoporous CeO 2 /ZnO composite abrasives polished the silica-based material with a smooth and flat surface (Ra = 0.17 nm), and the MRR was increased by 41 % relative to mesoporous CeO 2 .
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Advanced Surface Polishing Techniques · Minerals Flotation and Separation Techniques · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (56)

Show source-provided references
1. Doping strategy on properties and chemical mechanical polishing performance of CeO2 abrasives: a DFT assisted experimental study10.1016/j.apsusc.2023.156997 ↗
2. An ethylenediaminetetraacetic acid (EDTA) surface-functionalized CeO2 composite abrasives with the effective improvement of the removal rate on glass CMP10.1016/j.ceramint.2023.10.103 ↗
3. Research progress on the application of ceria nanoparticles as abrasives in dielectric layer CMP and post cleaning: structure, morphology, doping, and mechanism10.1016/j.colsurfa.2023.132551 ↗
4. RE (La, Nd and Yb) doped CeO2 abrasive particles for chemical mechanical polishing of dielectric materials: experimental and computational analysis10.1016/j.apsusc.2019.144668 ↗
5. A novel atomic removal model for chemical mechanical polishing using developed mesoporous shell/core abrasives based on molecular dynamics10.1039/D3NR04420C ↗
6. Chemical–mechanical polishing of 4H silicon carbide wafers10.1002/admi.202202369 ↗
7. Nd-doped porous CeO2 abrasives for chemical mechanical polishing of SiO2 films10.1016/j.mssp.2024.108265 ↗
8. Highly dispersed Gd-CeO2 nanocrystals supported on mesoporous silica composite particles towards photochemical (photo-assisted chemical) mechanical polishing10.1016/j.ceramint.2023.02.055 ↗
9. Development of Zr- and Gd-doped porous ceria (pCeO2) abrasives for achieving high-quality and high-efficiency oxide chemical mechanical polishing10.1016/j.ceramint.2022.01.289 ↗
10. Study on uniform size and spherical CeO2 abrasives synthesized by two-step method and their chemical mechanical polishing performances10.1016/j.mssp.2024.108920 ↗
11. Enhanced chemical mechanical polishing (CMP) performance of porous self-assembled spherical cerium oxide via RE(La/Pr/Nd) doping10.1016/j.apsusc.2024.161236 ↗
12. Novel CeO2@MOF and its derived abrasives for rapid chemical mechanical polishing10.1016/j.mssp.2024.109182 ↗
13. Meso-silica/Erbium-doped ceria binary particles as functionalized abrasives for photochemical mechanical polishing (PCMP)10.1016/j.apsusc.2021.149353 ↗
14. Atomic-scale surface of fused silica induced by chemical mechanical polishing with controlled size spherical ceria abrasives10.1016/j.jmapro.2022.12.008 ↗
15. Improvement of oxide removal rate in chemical mechanical polishing by forming oxygen vacancy in ceria abrasives via ultraviolet irradiation10.1016/j.matchemphys.2021.124967 ↗
16. A critical review on relationship of CeO2-based photocatalyst towards mechanistic degradation of organic pollutant10.1016/j.chemosphere.2021.131651 ↗
17. Double-layered core–shell heterostructures of mSiO2@CdS@CeO2 abrasive systems toward photochemical mechanical polishing (PCMP) applications10.1016/j.apsusc.2022.156274 ↗
18. Development of polystyrene/polyaniline/ceria (PS/PANI/CeO2) multi-component abrasives for photochemical mechanical polishing/planarization applications10.1016/j.apsusc.2021.151784 ↗
19. Development of carbon sphere/ceria (CS/CeO2) heterostructured particles and their applications to functional abrasives toward photochemical mechanical polishing10.1016/j.apsusc.2022.153449 ↗
20. Novel ceria/graphene oxide composite abrasives for chemical mechanical polishing10.1016/j.ceramint.2024.03.193 ↗
21. Atomic surface on fused silica induced by novel green photochemical mechanical polishing
22. Close atomic surface of titanium alloy produced by novel photocatalytic chemical mechanical polishing using developed SiO2@Al2O3@CeO2 composite abrasives with high material removal rate10.1016/j.apsusc.2025.163436 ↗
23. A novel strategy to construct the superior performance of 3D multi-shell CeO2/ZnO@ZnS as a reusable sunlight-driven ternary photocatalyst for highly efficient water remediation10.1016/j.jece.2021.105608 ↗
24. Catalytically stable and active CeO2 mesoporous spheres10.1021/ic100795p ↗
25. Influence of surfactant micelles on morphology and photoluminescence of zinc oxide nanorods prepared by one-step chemical synthesis in aqueous solution10.1021/jp071388o ↗
26. Study of doped mesoporous ceria with tailored oxygen vacancies for enhances activity for ethylbenzene oxidation application10.1016/j.colsurfa.2020.125163 ↗
27. Synthesis and catalytic study of CeO2 heterostructures with (Zn0.003-xCdx)S0.003 for the removal of crystal violet dye10.1016/j.physb.2022.413702 ↗
28. Room temperature synthesis and enhanced photocatalytic property of CeO2/ZnO heterostructures10.1007/s00339-017-1543-8 ↗
29. Enhancement mechanism of Y-doped Ce1−xYxO2 for photocatalytic-assisted chemical-mechanical polishing
30. CeO2-ZnO nano composites: dual-functionality for enhanced photocatalysis and biomedical applications10.1016/j.inoche.2023.111738 ↗
31. In situ construction of S-scheme AgBr/BiOBr heterojunction with surface oxygen vacancy for boosting photocatalytic CO2 reduction with H2O10.1016/j.apcatb.2021.120802 ↗
32. Self-doping based facet junctions and oxygen vacancies in ferroelectric Bi3TixNb2–xO9 nanosheets for boosting photocatalytic degradation and antibacterial activity10.1021/acsami.2c12026 ↗
33. In-situ constructed 2D/2D ZnIn2S4/Bi4Ti3O12 S-scheme heterojunction for degradation of tetracycline: performance and mechanism insights10.1016/j.jhazmat.2022.129438 ↗
34. Construction and mechanistic insights of 2D/2D Z-scheme Bi3TiNbO9/BiOBr heterojunction for enhanced photocatalytic organic pollutant removal10.1016/j.jallcom.2024.173671 ↗
35. Tandem Fields Facilitating Directional Carrier Migration in Van der Waals Heterojunction for Efficient Overall Piezo‐Synthesis of H2O2
36. S-Scheme heterojunction photocatalyst10.1016/j.chempr.2020.06.010 ↗
37. Role of the oxidation state of cerium on the ceria surfaces for silicate adsorption10.1016/j.apsusc.2016.06.193 ↗
38. Increase in Ce3+ concentration of ceria nanoparticles for high removal rate of SiO2 in chemical mechanical planarization10.1149/2.0371709jss ↗
39. Improvement of oxide chemical mechanical polishing performance by increasing Ce3+/Ce4+ ratio in ceria slurry via hydrogen reduction10.1016/j.mssp.2023.107349 ↗
40. A nanoclustered ceria abrasives with low crystallinity and high Ce3+/Ce4+ ratio for scratch reduction and high oxide removal rates in the chemical mechanical planarization10.1007/s10853-022-07338-x ↗
41. Direct and quantitative study of ceria–SiO2 interaction depending on Ce3+ concentration for chemical mechanical planarization (CMP) cleaning10.1016/j.mssp.2020.105500 ↗
42. Insights into the influence of CeO2 crystal facet on CO2 hydrogenation to methanol over Pd/CeO2 catalysts10.1021/acscatal.0c03324 ↗
43. Rapid microwave-assisted hydrothermal synthesis of CeO2 octahedra with mixed valence states and their catalytic activity for thermal decomposition of ammonium perchlorate10.1039/C9QI00362B ↗
44. Application of ZnO/CeO2 novel abrasive to quartz glass in photochemical mechanical polishing (PCMP)
45. Cerium-oxide-nanoparticle-decorated zinc oxide with enhanced photocatalytic degradation of methyl orange10.3390/app10051697 ↗
46. Oxygen vacancies and catalysis on ceria surfaces10.1126/science.1113955 ↗
47. UV-irradiated photocatalytic performance of yttrium doped ceria for hazardous Rose Bengal dye10.1016/j.apsusc.2019.06.284 ↗
48. Structural/surface characterization and catalytic evaluation of rare-earth (Y, Sm and La) doped ceria composite oxides for CH3SH catalytic decomposition10.1016/j.apsusc.2016.08.129 ↗
49. Polystyrene/CeO2 core/shell abrasives for high-quality 4H-SiC surface in ECMP: the effects of shell thickness10.1149/2162-8777/ab8b71 ↗
50. Development of mesoporous abrasives and its unprecedented polishing performance elucidated by a novel atomic model
51. Development of core–shell SiO2@A-TiO2 abrasives and novel photocatalytic chemical machinal polishing for atomic surface of fused silica10.1016/j.apsusc.2024.159293 ↗
52. Chemical processes in glass polishing10.1016/0022-3093(90)90200-6 ↗
53. Controlling oxygen vacancies and enhanced visible light photocatalysis of CeO2/ZnO nanocomposites10.1016/j.jphotochem.2019.112156 ↗
54. Efficient CeO2/ZnO heterojunction for enhanced heterogeneous photocatalytic application10.1016/j.inoche.2024.113553 ↗
55. Effect of Synergistic CeO2/MoS2 Abrasives on Surface Roughness and Material Removal Rate of Quartz Glass.
56. Effects of trivalent lanthanide (La and Nd) doped ceria abrasives on chemical mechanical polishing10.1016/j.powtec.2021.11.069 ↗