Development and morphological analysis of the zone refining process for high purity germanium
Source abstract
Abstract
A highly efficient purification process has been developed to enhance the purity of germanium (Ge) up to 13 N from an initial 4N purity. Hall effect measurements demonstrated that part of the zone refined Ge (ZRGe) bars exhibited p -type conductivity and high purity with a net charge carrier concentration of around 4–9 × 10 10 cm −3 . Noteworthy observations include a rise in carrier concentration (10 11 to 10 12 cm −3 ) at a very low zone refining (ZR) velocity of 1 mm/min, which is attributed to the diffusion of impurities from the container into the Ge melt. The purification efficiency was enhanced by optimizing the ZR velocity to around 4–5 mm/min. Purification was carried out at different process steps using graphite and quartz containers. Subsequent microstructural examinations, conducted in conjunction with wet-chemical etching of the sample unveiled the presence of various grains, grain boundaries (GBs), and low & high-density of dislocation clusters: These observations were made in samples that had undergone zone refining under various gas atmospheres including argon, nitrogen and hydrogen. Electron back scattered diffraction (EBSD) analysis reveals the characteristics of multiple grains and grain boundaries (GBs) of Ge refined in argon and nitrogen atmosphere, including low-angle GBs, high-angle GBs with coincide site lattice (CSL) Σ3, Σ9, Σ27a, and random angle GBs. In contrast, the EBSD results of Ge refined in hydrogen atmosphere shows larger grains with only a few low-angle grain boundaries. The materials refined in argon and nitrogen show a lower carrier lifetime (10–30 μs) owing to the presence of various high angle grains boundaries as well as low purity. Conversely, zone refining in hydrogen resulted in the carrier lifetime of around 50 μs in polycrystalline Ge wafers with larger grains. • Highly efficient purification process for Ge up to 13 N purity is developed. • P-type conductivity and good mobility values up to 40,000 cm 2 /V⋅s were achieved. • Zone-refining under hydrogen gas yielded good microstructure in polycrystalline Ge. • An optimized zone refining velocity is utilized to avoid diffusion. • The minority charge carrier lifetime has a correlation with grain-boundary angles.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Metal Extraction and Bioleaching · Extraction and Separation Processes · Solidification and crystal growth phenomena
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (23)
Show source-provided references
1. A prototype High Purity Germanium detector for high resolution gamma-ray spectroscopy at high count rates10.1016/j.nima.2015.05.053 ↗
2. Chapter 2 high-purity germanium detectors10.1016/S0080-8784(08)62741-6 ↗
3. Hydrogen concentration and distribution in high-purity germanium crystals10.1109/TNS.1982.4335948 ↗
4. Simulation for purification process of high pure germanium by zone refining method10.1016/j.jcrysgro.2017.01.012 ↗
5. Numerical modeling and optimization of zone refining10.1016/S0925-8388(99)00655-6 ↗
6. Zhang
7. Kim
8. Preparation of high-purity tin by zone melting10.3103/S1067821220010186 ↗
9. Technology development of high purity germanium crystals for radiation detectors10.1016/j.jcrysgro.2019.125396 ↗
10. Hydrogen reduction of enriched germanium dioxide and zone-refining for the LEGEND experiment10.1088/1748-0221/15/12/P12010 ↗
11. Physics of ultra-pure germanium10.1080/00018738100101357 ↗
12. Origin and control of the dominant impurities in high-purity germanium10.1109/TNS.1976.4328219 ↗
13. Development of large-diameter and very high purity Ge crystal growth technology for devices10.1002/crat.202200286 ↗
14. Crystal growth and detector performance of large size High-purity Ge crystals10.1016/j.mssp.2015.04.044 ↗
15. High-purity germanium crystal growing10.1557/PROC-16-1 ↗
16. High-purity germanium crystal growing10.1016/0029-554X(71)90593-3 ↗
17. Research status of high-purity metals prepared by zone refining10.3390/ma14082064 ↗
18. Nuclear instruments and detectors committee
19. Fundamentals of solidification
20. Phase selection and microstructure formation in undercooled Co-61.8 at.% Si melts under various containerless processing conditions10.1016/j.actamat.2013.04.061 ↗
21. Effect of grain boundary grooves at the crystal/melt interface on impurity accumulation during the unidirectional growth of multicrystalline silicon10.1016/j.scriptamat.2016.02.027 ↗
22. Investigation of dislocation cluster evolution during directional solidification of multicrystalline silicon10.1016/j.jcrysgro.2017.01.027 ↗
23. Crystal orientation and dislocation slip10.3390/met13121950 ↗