Laser processing of Ni-B coated Si-wafer: Simultaneous realization of selective emitters and copper barrier layers for TOPCon solar cells
Source abstract
Abstract
Laser doping selective emitter (LDSE) technology has become a research hotspot in the large-scale production of silicon solar cells (SCs) due to its advantages of room-temperature processing, precise control of doping profiles, and short processing duration. In this study, a Ni-B alloy coating was chemically deposited on the front surface of n-type tunneling oxide passivated contact (TOPCon) crystalline silicon (c-Si) solar cell precursors, through which selective B doping and the formation of NiSi 2 metal seed layer were achieved during laser grooving process. Electrochemical capacitance-voltage (ECV) tests revealed a significant enhancement in carrier concentration, thereby confirming the successful doping of B. This process resulted in the formation of a locally heavily doped (p ++ ) layer, which effectively reduced the contact resistance (R c ) between the metal electrodes and Si substrate. Theoretical calculations indicated that the built-in potential (V bi ) of the pn junction increased, thereby enhancing built-in electric field (E bi ). This enhancement of the built-in electric field contributed to the improvement of both the open-circuit voltage (V oc ) and the short-circuit current density (J sc ), and significantly strengthened the adhesion between the metal electrodes and the Si substrate, ultimately leading to a comprehensive enhancement in the performance of the SCs. This study provides a new technical route to advance the industrial application of laser doping technology.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Silicon and Solar Cell Technologies · Semiconductor materials and interfaces · Thin-Film Transistor Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (41)
Show source-provided references
1. 24.18% efficiency TOPCon solar cells enabled by super hydrophilic carbon-doped polysilicon films combined with plated metal fingers10.1016/j.solmat.2023.112393 ↗
2. Optimizing strategy of bifacial TOPCon solar cells with front-side local passivation contact realized by numerical simulation10.1016/j.solmat.2024.113189 ↗
3. Laser doping selective emitter with thin borosilicate glass layer for n-type TOPCon c-Si solar cells10.1016/j.solmat.2023.112230 ↗
4. Alleviating contaminant-induced degradation of TOPCon solar cells with copper plating10.1016/j.solmat.2025.113444 ↗
5. Optimizing phosphorus-doped polysilicon in TOPCon structures using silicon oxide layers to improve silicon solar cell performance10.1016/j.solmat.2024.113068 ↗
6. Double-sided TOPCon solar cells on textured wafer with ALD SiOx layer10.1016/j.solmat.2019.110357 ↗
7. Impact of laser-enhanced contact optimization on n-TOPCon solar cells' performance and efficiency: experimental and simulated insights10.1016/j.solmat.2025.113526 ↗
8. Bilayered phosphorus-doped polysilicon passivating contact structures for TOPCon solar cell applications10.1002/pip.3879 ↗
9. Low-temperature fabrication of boron-doped amorphous silicon passivating contact as a local selective emitter for high-efficiency n-type TOPCon solar cells10.1016/j.nanoen.2024.109556 ↗
10. Green-laser-doped selective emitters with separate BBr3 diffusion processes for high-efficiency n-type silicon solar cells10.1016/j.solmat.2020.110462 ↗
11. High-efficiency TOPCon solar cells with laser-assisted localized boron doping via silicon paste10.1109/JPHOTOV.2024.3380461 ↗
12. Study on selective emitter fabrication through an innovative pre-diffusion process for enhanced efficiency in TOPCon solar cells10.1002/pip.3766 ↗
13. High-efficiency selective boron emitter formed by wet chemical etch-back for n-type screen-printed Si solar cells10.1063/1.4973626 ↗
14. High efficiency n-type silicon solar cells with passivating contacts based on PECVD silicon films doped by phosphorus diffusion10.1016/j.solmat.2019.01.005 ↗
15. n-Type Si solar cells with passivating electron contact: identifying sources for efficiency limitations by wafer thickness and resistivity variation10.1016/j.solmat.2017.05.042 ↗
16. Tunnel oxide passivating electron contacts as full-area rear emitter of high-efficiency p-type silicon solar cells10.1002/pip.2960 ↗
17. Novel technique for fabrication of n-type crystalline silicon selective emitter for solar cell processing10.1088/2053-1591/ab18ee ↗
18. Etch-back of P+ structures for selective boron emitters in n-type c-Si solar cells10.1016/j.egypro.2014.08.086 ↗
19. Plasma-immersion ion implantation: a path to lower the annealing temperature of implanted boron emitters and simplify PERT solar cell processing10.1002/pip.3186 ↗
20. Review of laser doping and its applications in silicon solar cells10.1109/JPHOTOV.2023.3244367 ↗
21. A simplified and masking-free doping process for interdigitated back contact solar cells using an atmospheric pressure chemical vapor deposition borosilicate glass/phosphosilicate glass layer stack for laser doping followed by a high temperature step10.1002/pip.3663 ↗
22. Formation of selective emitter from phosphorus diffusion by laser doping process10.1007/s12633-024-03013-9 ↗
23. TOPCon – technology options for cost efficient industrial manufacturing10.1016/j.solmat.2021.111100 ↗
24. Laser damage and post oxidation repair performance of n-TOPCon solar cells with laser assisted doping boron selective emitter10.1016/j.solmat.2024.112988 ↗
25. Barrier properties of electroplating nickel layer for copper metallization in silicon solar cells10.20964/2018.12.23 ↗
26. The reduction of laser-damage on the rear surface of the N-type TOPCon solar cells with electroplating electrodes10.1016/j.mssp.2025.109433 ↗
27. Ultrafast laser-annealing of hydrogenated amorphous silicon in tunnel oxide passivated contacts for high-efficiency n-type silicon solar cells
28. Contact through nickel–silicon alloy seed layer in electroplating Ni/Cu/Ag10.3390/ma17112610 ↗
29. XRD and XPS characterisation of transition metal silicide thin films10.1016/j.susc.2011.10.015 ↗
30. XPS and HRTEM characterization of cobalt–nickel silicide thin films10.1016/S0169-4332(00)00122-7 ↗
31. Facile preparation and characterization of NiO/Ni2O3-decorated nanoballs and mixed phase CdS nano rods (CdS&NiO/Ni2O3) for effective photocatalytic decomposition of Congo red under visible light irradiation10.1080/01932691.2020.1814804 ↗
32. Mesoporous NiO/Ni2O3 nanoflowers for favorable visible light photocatalytic degradation of 4-chlorophenol10.1016/j.envres.2023.116790 ↗
33. X-ray photoelectron spectroscopy analysis of boron defects in silicon crystal: a first-principles study10.1063/1.4948572 ↗
34. Identification of boron clusters in silicon crystal by B1s core-level X-ray photoelectron spectroscopy: a first-principles study10.1063/1.3658030 ↗
35. The chemical states and atomic structure evolution of ultralow-energy high-dose boron implanted Si(110) via laser annealing
36. In situ XPS study of low temperature atomic layer deposition of B2O3 films on Si using BCl3 and H2O precursors10.1116/1.5044396 ↗
37. Emitter formation with boron diffusion from PECVD deposited boron-doped silicon oxide for high-efficiency TOPCon solar cells10.1016/j.solmat.2022.111713 ↗
38. Low-cost and stable semitransparent crystalline silicon solar cells via two-step laser processing10.1002/solr.202500221 ↗
39. Enabling savings in silver consumption and poly-Si thickness by integration of plated Ni/Cu/Ag contacts for bifacial TOPCon solar cells10.1016/j.solmat.2022.111889 ↗
40. Aluminum halide-based electron-selective passivating contacts for crystalline silicon solar cells10.1002/smll.202310352 ↗
41. Screen printed Ag-doped nickel metallization for industrial n-TOPCon silicon solar cells10.1016/j.solmat.2025.113602 ↗