journal article·2025-11Open access

Experimental development of hybrid nitride-based PCM with sand stones for enhanced thermal energy storage

Muhammad Shehram, Muhammad Najwan Hamidi, Aeizaal Azman Abdul Wahab, Mohd Khairunaz Mat Desa

Abstract

Thermal energy storage technologies are gaining significant interest in the modern era as they help reduce the strain on renewable energy resources and optimize thermal energy used. Phase change heat storage is particularly appealing due to its high energy density, low heat loss, and excellent thermal stability. This study enhances the thermal properties of phase change materials (PCMs), including thermal conductivity, stability, and economic/environmental impacts. The proposed design introduces a novel PCM combination, LiNO 3 -NaNO 3 -NaCl integrated with the sandstones for thermal energy storage. The inclusion of the sandstones significantly improves the PCM's thermal stability, exhibiting only an 8 % mass loss after exposure to 650 °C and a mere 1.5 % reduction in storage capacity after 600 thermal cycles. Additionally, the thermal conductivity increases from 0.46 W/m·K to 0.98 W/m·K with the incorporation of the sandstones. Structural analysis reveals that the PCM-sandstone composite maintains a well-organized structure with strong mechanical bonding. In the material's morphology, NaCl appears in crystalline form, while NaNO 3 is observed as bright spots. The melting point of the PCM sandstone composite is 96 °C, while solidification occurs at 130 °C. The specific heat capacity is measured at 1250 J/kg·K, and the material's density is 1700 kg/m 3 . The thermal efficiency of the energy storage system reaches 86 % with the addition of sandstones, and the exergy efficiency is also recorded at 86 %. Furthermore, the cost reduction achieved by integrating sandstones into the PCM is 9.09 %, while CO 2 emissions are reduced by 8.11 %.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Phase Change Materials Research · Adsorption and Cooling Systems · Solar Thermal and Photovoltaic Systems

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (57)

Show source-provided references
1. Characterization of natural rocks as filler materials for medium-temperature packed bed thermal energy storage system10.1016/j.est.2020.101822 ↗
2. Charging and discharging in thermal energy storage unit with fin-stone hybrid structure for enhancing heat transfer of phase change materials10.1016/j.ijheatmasstransfer.2024.125325 ↗
3. Evaluation and optimisation of hybrid sensible-latent heat thermal energy storage unit with natural stones to enhance heat transfer10.1016/j.renene.2023.118921 ↗
4. Experimental investigation on the performance analysis of blue metal stones and pebble stones as thermal energy storage materials in single slope solar still10.1016/j.matpr.2022.11.100 ↗
5. A review of recent improvements, developments, and effects of using phase-change materials in buildings to store thermal energy10.3390/designs7040090 ↗
6. Natural and sustainable thermal storage solution for solar distillation system using sensible fiber material and latent PCM: enhanced energy storage application10.1002/htj.23124 ↗
7. Perspective on the development of energy storage technology using phase change materials in the construction industry: a review10.3390/en16124806 ↗
8. Meta data analysis on building thermal management using phase change materials10.1016/j.est.2023.109760 ↗
9. Integrated supervisory control and data acquisition system for optimized energy management: leveraging photovoltaic and phase change material thermal storage10.1002/est2.70035 ↗
10. Enhancing solar flat plate collector efficiency with advanced phase change materials and expanded boron nitride10.1080/01411594.2024.2417205 ↗
11. Effect of various energy storage phase change materials (PCMs) and nano-enhanced PCMs on the performance of solar stills: a review10.1016/j.est.2024.112938 ↗
12. Review of the usage of thermal energy storage materials to enhance
13. Industrial-grade hydrated salt-based PCM thermal energy storage device: thermal and economic performances10.1016/j.applthermaleng.2024.125233 ↗
14. Thermal energy storage behaviour of 3D ceramic/molten salt structures under real concentrated solar radiation10.1016/j.jeurceramsoc.2024.116975 ↗
15. Analysis of steel making slag pebbles as filler material for thermocline tanks in a hybrid thermal energy storage system10.1016/j.solener.2019.07.036 ↗
16. Performance investigation on the cascaded packed bed thermal energy storage system with encapsulated nano-enhanced phase change materials for high-temperature applications10.1016/j.energy.2024.130554 ↗
17. Nanoencapsulation of phase change material with CuO nanoparticles: development of thermal properties for energy storage10.1016/j.inoche.2024.113258 ↗
18. Towards phase change materials for thermal energy storage: classification, improvements and applications in the building sector10.3390/app11041490 ↗
19. From waste to value: utilising waste foundry sand in thermal energy storage as a matrix material in composites10.1016/j.solener.2023.112294 ↗
20. Thermal characteristics of cementitious building materials with carbon and PCM for improved heat storage performance10.1016/j.conbuildmat.2024.138550 ↗
21. Experimental study on solid-solid phase change energy storage materials by a facile inorganic-organic integration strategy10.1016/j.est.2025.115617 ↗
22. Thermal performance of a novel composite phase change material for solar-assisted air source heat pump packed bed thermal energy storage application10.1016/j.applthermaleng.2024.124582 ↗
23. Fabrication of multistage phase change nanocellulose composites with robust mechanical property and high thermal storage capacity10.1016/j.est.2024.115130 ↗
24. Preparation and thermal characterization of composite PCMs with modified melting temperature encapsulated in cascade energy storage device for solar heat pump10.1016/j.est.2024.114500 ↗
25. Preparation and thermal properties of low-temperature composite phase-change materials based on a binary eutectic mixture with expanded graphite: effect of particle size and mass fraction10.1016/j.est.2021.102778 ↗
26. Investigation on thermal performance of epoxy resin encapsulated eutectic hydrated salt/expanded perlite composite phase change materials for thermal energy storage10.1016/j.solmat.2025.113453 ↗
27. Effect of enclosure design with composite/nano-enhanced/dual phase change material on melting response of latent heat storage systems10.1016/j.cherd.2024.12.027 ↗
28. Enhanced melting dynamics of phase change material (PCM) based energy storage system combining modified fin and nanoparticles under solar irradiation10.1108/HFF-08-2024-0643 ↗
29. Porous diamond Co-MOF and polyethylene glycol composites as form-stable phase change materials for thermal energy storage10.1016/j.molstruc.2024.140776 ↗
30. A novel PCM-based foam concrete for heat transfer in buildings-Experimental developments and simulation modelling10.1016/j.est.2024.114625 ↗
31. Experimental and numerical study on cold storage properties of organic/inorganic composites in thermal energy storage10.1016/j.energy.2025.134477 ↗
32. A single-wall carbon nanotube non-woven fabric-phase change material hybrid for wearable thermal management10.1016/j.carbon.2025.120027 ↗
33. Construction of Graphene/SWCNT network in NaCl-based phase change material toward efficient thermal energy storage10.1016/j.applthermaleng.2024.125209 ↗
34. Developing smart medical implants using functionalized carbon nanostructures
35. Preparation and thermal properties of a novel ternary molten salt/expanded graphite thermal storage material10.1016/j.est.2023.109273 ↗
36. Thermally conductive molten salt for thermal energy storage: synergistic effect of a hybrid graphite‐graphene nanoplatelet filler10.1002/gch2.202300053 ↗
37. Phase change thermal storage composite synthesized by impregnating steel-slag-derived porous ceramics with the molten solar salts10.1016/j.est.2024.112426 ↗
38. Form-stable Na2CO3-NaCl/mullite phase change composite with SiC enhanced thermal conductivity for high temperature thermal storage10.1016/j.est.2024.111511 ↗
39. Fabrication and investigation of chloride salt based shape stabilization phase change composite with excellent thermal properties for medium and high temperature thermal energy storage10.1016/j.solmat.2024.113200 ↗
40. Thermal properties enhancement of recycled lithium chloride molten salt doped with SiC used for thermal energy storage: a molecular dynamics study10.1016/j.icheatmasstransfer.2024.107734 ↗
41. Thermal feature of Sn3N2-LiNO3-NaCl/monolayer BN high thermal conductivity phase change materials for energy storage
42. Study on the influence of tank structure and fin configuration on heat transfer performance of phase change thermal storage system10.1016/j.energy.2021.121382 ↗
43. New effective thermal conductivity model for the analysis of whole thermal storage tank10.1016/j.ijheatmasstransfer.2018.11.122 ↗
44. Numerical and experimental investigation of heat transfer in a shell and tube thermal energy storage system10.1016/j.icheatmasstransfer.2014.02.023 ↗
45. Experimental analysis and numerical modeling of a shell and tube heat storage unit with phase change materials10.1021/acs.iecr.6b01080 ↗
46. Thermal energy storage performance of a three-PCM cascade tank in a high-temperature packed bed system10.1016/j.renene.2020.01.051 ↗
47. A novel shell-and-tube thermal energy storage tank: modeling and investigations of thermal performance10.1016/j.applthermaleng.2019.113964 ↗
48. Experimental studies on the performance of eicosane-polyethylene-expanded graphite based composite phase change materials (CPCMs) for latent heat thermal storage10.1016/j.est.2025.116159 ↗
49. Thermal and mechanical performance assessment of composite (CPCM) for energy storage
50. Enhancing thermal energy storage properties of blend phase change materials using beeswax10.1007/s11356-024-34591-1 ↗
51. Development of phase change eco-composite materials from eggshell waste
52. Enhancing flat plate collectors' efficiency by minimizing optical losses through vacuum glazing and ethylene glycol-diamond-alumina nanofluid
53. Experimental investigation in the selection of phase change materials based on thermal stratification effect in thermal energy storage system10.1002/ep.14209 ↗
54. Optimization strategies of composite phase change materials for thermal energy storage, transfer, conversion and utilization10.1039/D0EE01355B ↗
55. Preparation and thermal properties of LiNO3-NaNO3-NaCl/EG composite heat storage material10.1016/j.solener.2023.111926 ↗
56. Phase change thermal storage composite synthesized by impregnating steel-slag-derived porous ceramics with the molten solar salts10.1016/j.est.2024.112426 ↗
57. Review on thermal energy storage with phase change materials and applications10.1016/j.rser.2007.10.005 ↗