journal article·2025-10Open access

Enhanced photocatalytic hydrogen production on Au/TiO2-CeO2 through the formation of oxygen vacancies

Alejandro Gutiérrez-Sánchez, David Ramírez-Ortega, Benjamín Portales, Rodolfo Zanella

Abstract

TiO 2 -CeO 2 (TC) materials superficially modified with Au nanoparticles (AuNPs) were prepared using the sequential deposition-precipitation with urea method. EDS revealed the effective deposition of Ce and Au and a well-distributed CeO 2 phase on TiO 2 . STEM-HAADF showed proximity between the TiO 2 and CeO 2 phases and the formation of AuNPs with a size of 3.6 ± 0.7 nm. The TiO 2 band gap (E g ) decreased slightly with the increase in the CeO 2 concentration. For the TC materials, XPS confirmed a slight increase in the Ti 3+ concentration and the predominant presence of Ce 3+ , which increased the oxygen vacancies (OVs). Furthermore, the AuNPs were mainly composed of Au 0 (80.2 %). XPS and photoelectrochemical characterizations revealed higher valence band-edge energy after the CeO 2 and AuNP incorporation, making proton reduction in the material more thermodynamically favorable. As for the hydrogen evolution reaction, the TC material with optimal Ce loading of 0.9 wt% increased the photocatalytic hydrogen production rate to 2.3 mmol g −1 h −1 , 20 % higher than that of pristine TiO 2 . Additionally, adding 0.7 wt% of AuNPs led to a substantial improvement in hydrogen photocatalytic production, reaching 10.7 mmol g −1 h −1 . This enhancement was ascribed to the ability of AuNPs to act as electron traps, reducing the electron-hole recombination. Photoelectrochemical characterization showed a decrease in the flat-band potential upon incorporation of CeO 2 and AuNPs, which could also be associated with the formation of OVs. AuNPs on the surface improved the stability of the electrons in the CB through the formation of a Schottky junction. • Au/TiO 2 -CeO 2 samples were prepared by sequential deposition-precipitation with urea. • TiO 2 -CeO 2 materials showed a decrease in band gap values compared to bare TiO 2 . • Optimal amount of oxygen vacancies related to Ce 3+ formation enhanced photoactivity. • Increase in the conduction band energy-edge produced a favored proton reduction. • AuNPs increased photoactivity by stabilizing electrons in the conduction band.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Advanced Photocatalysis Techniques · Catalytic Processes in Materials Science · Copper-based nanomaterials and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (87)

Show source-provided references
1. Latest progress on the key operating parameters affecting the photocatalytic activity of TiO2-based photocatalysts for hydrogen fuel production: a comprehensive review
2. Energy Agency
3. Novel Au/TiO2 photocatalysts for hydrogen production in alcohol-water mixtures based on hydrogen titanate nanotube precursors10.1016/j.jcat.2015.07.014 ↗
4. Kinetic study of the effects of pH on the photocatalytic hydrogen production from alcohols10.1016/j.ijhydene.2019.10.114 ↗
5. Semiconductor-based photocatalytic hydrogen generation10.1021/cr1001645 ↗
6. A critical review in strategies to improve photocatalytic water splitting towards hydrogen production10.1016/j.ijhydene.2018.10.200 ↗
7. Fundamentals of TiO2 photocatalysis: concepts, mechanisms, and challenges10.1002/adma.201901997 ↗
8. Recent advances in semiconductor heterojunctions and Z-schemes for photocatalytic hydrogen generation
9. Promoting the oxidative removal rate of oxalic acid on gold-doped CeO2/TiO2 photocatalysts under UV and visible light irradiation10.1016/j.seppur.2015.10.070 ↗
10. TiO2-CeO2 assisted heterostructures for photocatalytic mitigation of environmental pollutants: a comprehensive study on band gap engineering and mechanistic aspects10.1016/j.inoche.2023.110564 ↗
11. Defect-induced band gap narrowed CeO2 nanostructures for visible light activities10.1021/ie500986n ↗
12. Synergistic effect of CeO2 modified TiO2 photocatalyst on the enhancement of visible light photocatalytic performance10.1016/j.jallcom.2017.04.138 ↗
13. Enhanced redox properties of Gd-doped CeO2–TiO2 induced by oxygen vacancies and disordered structure
14. Preparation and characterization of CeO2/TiO2 catalysts for selective catalytic reduction of NO with NH310.1016/j.catcom.2009.11.024 ↗
15. Enhanced performance of glycerol electro-oxidation in alkaline media using bimetallic Au–Cu NPs supported by MWCNTs and reducible metal oxides10.3389/fchem.2023.1165303 ↗
16. Au/TiO2-CeO2 catalysts for photocatalytic water splitting and VOCs oxidation reactions10.3390/catal6080121 ↗
17. The effect of titania precursors and ceria loadings on textural and chemical properties of TiO2–CeO2 and Pt–Rh/TiO2–CeO210.1007/s10971-015-3652-1 ↗
18. Tuning of electron transfer by Ni–P decoration on CeO2–TiO2 heterojunction for enhancement in photocatalytic hydrogen generation10.1016/j.mssp.2019.104742 ↗
19. Degradation of the herbicide 2,4-dichlorophenoxyacetic acid over Au/TiO2-CeO2 photocatalysts: effect of the CeO2 content on the photoactivity
20. TiO2/CeO2 core/shell heterojunction nanoarrays for highly efficient photoelectrochemical water splitting10.1016/j.ijhydene.2017.03.068 ↗
21. Improving the reducibility of CeO2/TiO2 by high-temperature redox treatment: the key role of atomically thin CeO2 surface layers10.1039/D1TA08348A ↗
22. Fabrication of graphene-based TiO2@CeO2and CeO2@TiO2core-shell heterostructures for enhanced photocatalytic activity and cytotoxicity10.1021/acsomega.2c04338 ↗
23. Bimetallic cocatalysts for photocatalytic hydrogen production from water10.1016/j.cej.2020.128250 ↗
24. Camposeco
25. Highly efficient catalytic reductive degradation of various organic dyes by Au/CeO2-TiO2 nano-hybrid10.1007/s12039-016-1203-0 ↗
26. Mechanism of deposition of gold precursors onto TiO2 during the preparation by cation adsorption and deposition–precipitation with NaOH and urea10.1016/j.apcata.2005.02.045 ↗
27. Influence of the conditions of thermal treatments and of storage on the size of the gold particles in Au/TiO2 samples10.1016/j.cattod.2005.07.008 ↗
28. Burattin
29. Preparation of nanocatalysts using deposition precipitation with urea: mechanism, advantages and results10.1002/cben.202100054 ↗
30. Alexandrova
31. SPANA [software]
32. Aggregation of TiO2 nanoparticles in aqueous media: effects of pH, ferric ion and humic acid
33. Surface modification of titania nanoparticles by catechol derivative molecules: preparation of concentrated suspensions10.1016/j.colsurfa.2020.125167 ↗
34. Fully quantitative X-ray characterisation of Evonik aeroxide TiO 2 P25®10.1016/j.matlet.2014.02.055 ↗
35. Surface structure and phase composition of TiO2 P25 particles after thermal treatments and HF etching10.3389/fmats.2020.00192 ↗
36. The effect of AuNP modification on the antioxidant activity of CeO 2 nanomaterials with different morphologies10.1016/j.apsusc.2018.06.277 ↗
37. Strain study of gold nanomaterials as HR-TEM calibration standard10.1016/j.micron.2015.07.009 ↗
38. Effect of gold loading and TiO2 support composition on the activity of Au/TiO2 photocatalysts for H2 production from ethanol–water mixtures10.1016/j.jcat.2013.05.031 ↗
39. Enhanced photocatalytic properties of CeO2/TiO2 heterostructures for phenol degradation10.1016/j.colcom.2021.100476 ↗
40. Unveiling the synergistic effects of hydrogen annealing on CeO2 nanofibers for highly sensitive acetone gas detection: role of Ce3+ ions and oxygen vacancies10.1016/j.apsusc.2023.158411 ↗
41. Oxygen vacancy engineering for tuning the catalytic activity of LaCoO3 perovskite10.1016/j.jre.2023.01.002 ↗
42. Role of CeO2 as oxygen promoter in the accelerated photocatalytic degradation of phenol over rutile TiO210.1016/j.apcatb.2014.11.029 ↗
43. Synthesis of CeO 2/reduced graphene oxide nanocomposite for electrochemical determination of ascorbic acid and dopamine and for photocatalytic applications10.1016/j.mtchem.2019.02.001 ↗
44. Synthesis and optical properties of CeO2 nanocrystalline films grown by pulsed electron beam deposition10.1007/s10853-008-2750-7 ↗
45. Band-gap energy estimation from diffuse reflectance measurements on sol-gel and commercial TiO 2: a comparative study10.1007/s10971-011-2582-9 ↗
46. Enhanced photocatalytic performance of colored Ti2O3–Ti3O5–TiO2 heterostructure for the degradation of antibiotic ofloxacin and bactericidal effect10.1016/j.chemosphere.2024.143247 ↗
47. Construction of CeO2/TiO2 heterojunctions immobilized on activated carbon fiber and its synergetic effect between adsorption and photodegradation for toluene removal10.1007/s11051-020-04860-4 ↗
48. Recent advances in Ti3+ self-doped nanostructured TiO2 visible light photocatalysts for environmental and energy applications10.1016/j.cej.2019.123011 ↗
49. Characterization of structural and surface properties of nanocrystalline TiO2-CeO2 mixed oxides by XRD, XPS, TPR, and TPD10.1021/jp8110309 ↗
50. XPS characterization of Au/TiO2 catalysts: binding energy assessment and irradiation effects10.1016/j.apcata.2010.05.039 ↗
51. Increasing the activity and selectivity of TiO2-supported Au catalysts for renewable hydrogen generation from ethanol photoreforming by engineering Ti3+ defects10.1021/acssuschemeng.9b02008 ↗
52. Role of Ce3+ valence state and surface oxygen vacancies on enhanced electrochemical performance of single step solvothermally synthesized CeO2 nanoparticles10.1016/j.electacta.2018.07.184 ↗
53. Understanding of Au-CeO2 interface and its role in catalytic oxidation of formaldehyde10.1016/j.apcatb.2019.118138 ↗
54. Dalton · 1972
55. Ce 3d XPS investigation of cerium oxides and mixed cerium oxide (Ce xTiyOz)
56. Oxygen defects and formation of Ce3+ affecting the photocatalytic performance of CeO2 nanoparticles10.1039/C3RA44603D ↗
57. XPS Study of the reduction of cerium dioxide10.1002/sia.740200604 ↗
58. Role of interface contact in CeO2-TiO2 photocatalytic composite materials10.1021/cs400878b ↗
59. Morphology effects of nanoscale ceria on the activity of Au/CeO2 catalysts for low-temperature CO oxidation10.1016/j.apcatb.2009.03.015 ↗
60. Insight into the deactivation of Au/CeO2 catalysts studied by in situ spectroscopy during the CO-PROX reaction10.1021/acscatal.5b00739 ↗
61. Catalytic CO oxidation over Au nanoparticles supported on CeO2 nanocrystals: effect of the Au-CeO2 interface10.1021/acscatal.8b03539 ↗
62. Geometric edge effect on the interface of Au/CeO2 nanocatalysts for CO oxidation10.1007/s12274-024-6508-6 ↗
63. Deactivation of a Au/CeO2-Co3O4 catalyst during CO preferential oxidation in H2-rich stream10.1016/j.jcat.2009.04.003 ↗
64. XPS study of supported gold catalysts: the role of Au0 and Au+δ species as active sites10.1002/sia.2180 ↗
65. Photo-catalytic hydrogen production over Au/g-C3N4: effect of gold particle dispersion and morphology10.1039/C9CP02241D ↗
66. Promotion of Au3+ reduction on catalytic performance over the Au/CuO-CeO2 catalysts for preferential CO oxidation10.1016/j.ijhydene.2018.04.081 ↗
67. Effect of oxygen mobility in the lattice of Au/TiO 2 on formaldehyde oxidation10.1134/S0023158412020048 ↗
68. Enhancing the photocatalytic hydrogen production of the ZnO–TiO2 heterojunction by supporting nanoscale Au islands10.1016/j.ijhydene.2021.08.019 ↗
69. Combining XPS and ToF-SIMS for assessing the CO oxidation activity of Au/TiO2 catalysts10.1016/j.jcat.2017.12.010 ↗
70. X-ray photoelectron spectroscopy-based valence band spectra of passive films on titanium10.1002/sia.7102 ↗
71. Investigating the effect of UV light pre-treatment on the oxygen activation capacity of Au/TiO210.1039/C6CY01717G ↗
72. NO treated TiO2 as an efficient visible light photocatalyst for NO removal
73. Oxygen vacancies mediated in-situ growth of noble-metal (Ag, Au, Pt) nanoparticles on 3D TiO2 hierarchical spheres for efficient photocatalytic hydrogen evolution from water splitting10.1016/j.ijhydene.2019.10.231 ↗
74. Metal particle size effects on the photocatalytic hydrogen ion reduction10.1021/acscatal.8b05070 ↗
75. Effect of oxygen vacancies and phases on catalytic properties of hydrogen-treated nanoceria particles10.1088/2053-1591/aaaff4 ↗
76. Tailoring the energy band gap and edges' potentials of g-C3N4/TiO2composite photocatalysts for NOxremoval10.1016/j.cej.2015.12.102 ↗
77. Interfacial construction of P25/Bi2WO6 composites for selective CO2 photoreduction to CO in gas-solid reactions10.1039/D3RA00418J ↗
78. (Photo)electrochemical methods for the determination of the band edge positions of TiO 2-based nanomaterials10.1155/2011/786759 ↗
79. TiO2 thin film electrodes: correlation between photocatalytic activity and electrochemical properties10.1021/jp807655a ↗
80. Growth of oriented single crystalline La-doped TiO2 nanorod arrays electrode and investigation of optoelectronic properties for enhanced photoelectrochemical activity10.1039/c3ra40746b ↗
81. Wide-range tuning of the titanium dioxide flat-band potential by adsorption of fluoride and hydrofluoric acid10.1021/j100373a072 ↗
82. Determination of the flat band potential of nanoparticles in porous electrodes by blocking the substrate-electrolyte contact10.1021/acs.jpcc.7b11423 ↗
83. Influence of Ce doping on morphology, crystallinity and photoelectrochemical charge transfer characteristics of TiO2 nanorod arrays grown on conductive glass substrate10.1016/j.jallcom.2021.160481 ↗
84. Effect of quantum dot deposition on the interfacial flatband potential, depletion layer in TiO 2 nanotube electrodes, and resulting H 2 generation rates10.1021/jp305388c ↗
85. Visible light active Ce/Ce2O/CeO2/TiO2 nanotube arrays for efficient hydrogen production by photoelectrochemical water splitting10.1016/j.ijhydene.2016.01.154 ↗
86. Conduction and valence band positions of Ta2O5, TaOn, and Ta3N5 by UPS and electrochemical methods10.1021/jp027593f ↗
87. Absolute potential of the standard hydrogen electrode and the problem of interconversion of potentials in different solvents10.1021/jp100402x ↗