Biaxial bending strength of thin silicon dies in the ring-on-ring test by considering geometric nonlinearity and material anisotropy
Source abstract
Abstract
The ring-on-ring test (RoR) is a standard biaxial bending test specified in ASTM C1499-19 and ISO 17167. This test has been utilized for characterizing the biaxial bending strength of silicon dies or wafers to eliminate the die edge chipping effect in the four-point bending test. However, judging from the literature, when testing thin silicon dies, the test is subject to geometric nonlinear effects. This study aims to investigate this nonlinear mechanics in the RoR test using experimental, theoretical, and numerical methods while considering silicon material anisotropy. A 2D-isotropy model of a nonlinear finite element method (NFEM) simulation with specimen elastic modulus of 130 GPa is utilized and verified by experiments and a 3D-anisotropy model in terms of deformation (or displacement) and stresses. Based on the 2D-isotropy NFEM solutions, the fitting equations of correction factors to the theoretical solution are proposed and implemented on determining the biaxial bending strength of 10 mm × 10 mm silicon dies ranging from 57 μm to 297 μm in thickness. It is found that those proposed fitting equations are independent on the test specimen thickness, radius, and materials but not on the radii of the loading and supporting rings. It has also been successfully demonstrated that the RoR test using the theory associated with the correction factor equations can be easy to use to determine the biaxial bending strength of the thin silicon dies that frequently failed in the nonlinear range.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Surface Polishing Techniques · Optical measurement and interference techniques · Surface Roughness and Optical Measurements
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (38)
Show source-provided references
1. Burghartz · 2011
2. Thin silicon wafer processing and strength characterization
3. Ultra-thin chips for high-performance flexible electronics
4. Ultrathin die pick-up for 3D chip stacking
5. Thin IC chip pickup process risk analysis via experiments in conjunction with numerical approach
6. Bending induced electrical response variation in ultra-thin chips and device modeling
7. Materials and mechanics issues in flip-chip organic packaging
8. Investigation of thermo-mechanical behaviors of flip chip BGA in IC packaging10.1109/TCAPT.2004.831817 ↗
9. An overview of experimental methodologies and their applications for die strength measurement10.1109/TCAPT.2003.815111 ↗
10. Characterization methods for ultrathin wafer and die quality: A Review10.1109/TCPMT.2014.2363570 ↗
11. Test methods for silicon die strength10.1115/1.2351907 ↗
12. Testing and evaluation of silicon die strength10.1109/TEPM.2007.899072 ↗
13. Schoenfelder · 2011 · 195
14. Nonlinear characteristics in fracture strength test of ultrathin silicon die10.1088/0268-1242/30/4/045005 ↗
15. Evaluation of three-point bending strength of thin silicon die with a consideration of geometric nonlinearity10.1109/TDMR.2019.2937988 ↗
16. Correction factors to strength of thin silicon die in three- and four-point bending tests due to nonlinear effects10.1016/j.microrel.2021.114424 ↗
17. Experimental evaluations of the strength of silicon die by 3-point-bend versus ball-on-ring tests10.1109/TEPM.2009.2028329 ↗
18. Effect of dicing technique on the fracture strength of Si dies with emphasis on multimodal failure distribution10.1109/TDMR.2009.2037141 ↗
19. Bi-axial fracture strength characteristic of an ultrathin flash memory chip
20. Evaluation by three-point-bend and ball-on-ring tests of thinning process on silicon die strength10.1016/j.microrel.2012.06.093 ↗
21. Geometric nonlinear effect on biaxial bending strength of thin silicon die in the ball-on-ring Test
22. Correction factors to biaxial bending strength of thin silicon die in the ball-on-ring test by considering geometric nonlinearity and material anisotropy10.1093/jom/ufad026 ↗
23. Geometric nonlinear effect on biaxial bending strength of thin silicon die in the PoEF test10.1109/TDMR.2020.2987010 ↗
24. A comparison of biaxial bending strength of thin silicon dies in the ball-on-ring and PoEF tests10.1115/1.4056717 ↗
25. A method for measuring the strength of sheet glass10.1007/BF00681213 ↗
26. Biaxial flexure test for ceramics
27. Concentric ring on ring test for unirradiated and irradiated miniature SiC specimens10.1016/j.jnucmat.2010.12.083 ↗
28. Biaxial stress in thin glass during ring-on-ring testing with large deflections
29. Investigation of stress fields for non-standard sized glass plates loaded by ring-on-ring10.1016/j.jeurceramsoc.2022.01.015 ↗
30. Gulati · 2011
31. Finite element analysis of ring-on-ring test on LCD panels10.1109/JDT.2013.2251744 ↗
32. Ring-on-ring testing of thin, curved bi-layered materials10.1016/j.jeurceramsoc.2011.05.021 ↗
33. Strength of silicon single-crystal wafers for solar cells10.1134/S1063784220010259 ↗
34. Fracture strength of silicon solar wafers with different surface textures
35. A statistical distribution function of wide application
36. Abernethy · 2010
37. Young's modulus, shear modulus, and Poisson's ratio in silicon and germanium10.1063/1.1713863 ↗
38. Investigation on Cu TSV-induced KOZ in silicon chips: simulations and experiments10.1109/TED.2013.2263298 ↗