Synthesis of highly hygroscopic liquid desiccant for the application of organic light-emitting diodes encapsulation
Source abstract
Abstract
Organic light-emitting diodes (OLEDs) have been widely studied and used due to their excellent photoelectric properties. However, OLEDs suffer from the relatively inferior environmental stability due to their water-susceptible organic compositions. Here, we have developed a novel liquid desiccant (LD) composed of porous CaO particles (0.1819 cm³/g) with high specific surface area (23.37 m 2 /g). The LD shows a fast water-absorbing rate and a large saturated water-absorbing capacity (0.4995 g/g). The LD is further applied to the OLED encapsulation and tested at 25 °C and relative humidity of 50 %. Compared to the OLED without LD, the LT 90 lifetime (time for the brightness decreased to 90 % of the initial brightness) of the OLED with LD is prolonged from 72 h to 240 h under constant current drive. The results revealed that introducing the porous and high specific surface area morphology is an efficient way to improve the hygroscopic property of desiccant. The good performance of LD facilitates the application of OLED in the commercialized application.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Light-Emitting Diodes Research · ZnO doping and properties · Advanced Sensor and Energy Harvesting Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (39)
Show source-provided references
1. Highly efficient phosphorescent emission from organic electroluminescent devices10.1038/25954 ↗
2. High-efficiency organic light-emitting diodes with fluorescent emitters10.1038/ncomms5016 ↗
3. Highly efficient organic light-emitting diodes from delayed fluorescence10.1038/nature11687 ↗
4. Investigation of the impact and mechanisms of changes in the process evaporation rate in high efficiency exciplex-based OLEDs10.1016/j.jallcom.2020.157127 ↗
5. Metasurface-driven OLED displays beyond 10,000 pixels per inch10.1126/science.abc8530 ↗
6. Solution-processed phosphorus-tungsten oxide film as hole injection layer for application in efficient organic light-emitting diode10.1016/j.mssp.2018.06.007 ↗
7. Hot-wire vapor deposited tungsten and molybdenum oxide films used for carrier injection/transport in organic optoelectronic devices10.1016/j.mssp.2013.02.006 ↗
8. Degradation mechanism of small molecule-based organic light-emitting devices10.1126/science.283.5409.1900 ↗
9. Thickness dependent barrier performance of permeation barriers made from atomic layer deposited alumina for organic devices10.1016/j.orgel.2014.12.003 ↗
10. Thin-film permeation-barrier technology for flexible organic light-emitting devices10.1109/JSTQE.2004.824072 ↗
11. Barrier performance optimization of atomic layer deposited diffusion barriers for organic light emitting diodes using x-ray reflectivity investigations10.1063/1.4839455 ↗
12. Long-lasting and efficient inverted pure blue organic light-emitting diodes by inserting an ultrathin aluminum interlayer10.1016/j.jallcom.2019.152299 ↗
13. Plasmonic enhancement of stability and brightness in organic light-emitting devices10.1038/s41586-020-2684-z ↗
14. A flexible moisture barrier comprised of a SiO2-embedded organic–inorganic hybrid nanocomposite and Al2O3 for thin-film encapsulation of OLEDs10.1016/j.orgel.2013.03.008 ↗
15. Thin film encapsulation for organic light emitting diodes using a multi-barrier composed of MgO prepared by atomic layer deposition and hybrid materials10.1016/j.orgel.2013.04.011 ↗
16. Highly conformal SiO2/Al2O3 nanolaminate gas-diffusion barriers for large-area flexible electronics applications10.1088/0957-4484/21/47/475203 ↗
17. Highly flexible and efficient Fabric-based organic light-emitting devices for Clothing-Shaped Wearable displays10.1038/s41598-017-06733-8 ↗
18. Reliable thin film encapsulation for organic light emitting diodes grown by low-temperature atomic layer deposition10.1063/1.3153123 ↗
19. Flexible Lamination encapsulation10.1002/adma.201501856 ↗
20. Air-Stable flexible organic light-emitting diodes enabled by atomic layer deposition10.1088/0957-4484/26/2/024005 ↗
21. Laminated Graphene films for flexible transparent thin film encapsulation10.1021/acsami.6b01639 ↗
22. Optimization of Al2O3/ZrO2 nanolaminate structure for thin-film encapsulation of OLEDs10.1016/j.orgel.2012.07.007 ↗
23. Extremely high barrier performance of organic-inorganic Nanolaminated thin films for organic light-emitting diodes10.1021/acsami.6b15404 ↗
24. Ieee, Shanghai
25. Morphological change in the degradation of A1 electrode surfaces of electroluminescent devices by fluorescence microscopy and AFM10.1016/0040-6090(95)06781-7 ↗
26. Organic light-emitting devices with extended operating lifetimes on plastic substrates10.1063/1.1514831 ↗
27. Transparent barrier Coatings on high temperature Resisting polymer substrates for flexible electronic applications10.1149/1.3261761 ↗
28. A method to evaluate mechanical performance of thin transparent films for flexible displays10.1016/j.tsf.2006.11.034 ↗
29. High-performance thin-film encapsulation for organic light-emitting diodes10.1016/j.orgel.2017.02.009 ↗
30. Deposition and permeation properties of SiNX/parylene multilayers on polymeric substrates10.1016/j.surfcoat.2005.08.133 ↗
31. Gas diffusion barriers on polymers using multilayers fabricated by Al2O3 and rapid SiO2 atomic layer deposition10.1021/jp076866+ ↗
32. Al2O3/ZrO2 nanolaminates as ultrahigh gas‐diffusion barriers—a strategy for reliable encapsulation of organic electronics10.1002/adma.200803440 ↗
33. Plasma-assisted atomic layer deposition of Al2O3 moisture permeation barriers on polymers10.1063/1.2338776 ↗
34. Realization of highly-dense Al2O3 gas barrier for top-emitting organic light-emitting diodes by atomic layer deposition10.1039/C5RA21424F ↗
35. Inorganic/organic multilayer passivation incorporating alternating stacks of organic/inorganic multilayers for long-term air-stable organic light-emitting diodes10.1016/j.orgel.2013.09.045 ↗
36. Enhanced moisture barrier performance for ALD-encapsulated OLEDs by introducing an organic protective layer10.1039/C7TC00903H ↗
37. The improvement of thin film barrier performances of organic–inorganic hybrid nanolaminates employing a low-temperature MLD/ALD method10.1039/C4RA06638C ↗
38. Water vapor and oxygen degradation mechanisms in organic light emitting diodes10.1002/1616-3028(200104)11:2<116::AID-ADFM116>3.0.CO;2-B ↗
39. Aqueous dispersing mechanism study of nonionic polymeric dispersant for organic pigments10.1007/s00396-021-04937-z ↗