journal article·2024-03

Numerical analysis and experimental research on the removal of CuO particles from monocrystalline silicon surfaces by picosecond laser

Lifang Mei, Long Lin, Dongbing Yan, Yu Liang, Yu Wu, Shuixuan Chen

Publisher page

Abstract

CuO particles on the surface of silicon wafers can seriously affect integrated circuits performance and service life. This paper carries out numerical calculations and experimental research on the removal of CuO particles from silicon substrates surfaces by picosecond laser. A thermal-stress coupled finite element model is established to simulate the changes in the temperature of silicon substrates and the thermal stress of CuO particles with laser action time and energy density, to predict the cleaning threshold of the particles and the damage threshold of the silicon substrates. The results show that the cleaning threshold for CuO particles with a particle size of 10 μm is 0.029 J/cm 2 and the damage threshold for the silicon substrate is 0.512 J/cm 2 . As the laser energy density increases, the CuO particles removal rate on the silicon surface increases first and then decreases, and the silicon substrate roughness decreases first and then increases. When the laser energy density is 0.429J/cm 2, the CuO particle removal rate reaches 93.42 %, the wafer surface is undamaged, and the roughness is as low as 1.33 nm. The ratio of Cu and Si elements on the cleaned silicon substrate surface is close to that on the silicon substrate surface before the sample was made.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Surface Polishing Techniques · Surface Roughness and Optical Measurements · Laser Material Processing Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (25)

Show source-provided references
1. Meniscus-shear particle detachment in foam-based cleaning of silicon wafers with an immersion/withdrawal cell10.1021/ie1012954 ↗
2. Analysis and research on cleaning and testing technology of single crystal silicon wafer
3. Zhang · 2021
4. Liu · 2019 · vol. 35 · 11
5. Application of laser cleaning technology in industrial field
6. Wang · 2022
7. Research progress on the mechanism of laser cleaning
8. Removal mechanism of laser cleaning for inorganic thermal control coatings on aluminum alloys10.1016/j.apsusc.2023.157578 ↗
9. Laser-cleaning effects induced on different types of bronze archaeological corrosion products: chemical-physical surface characterization10.1016/j.apsusc.2021.150884 ↗
10. Laser cleaning of particulate contaminants of K9 Surface
11. Study on exfoliation of nano-particles on silicon wafer surface and its composition detection method10.7498/aps.69.20200517 ↗
12. Experiment and theroetical study on laser cleaning Al2O3 Particle on silicon wafer surface
13. Cleaning of micrometer SiO2 contamination on glass insulator surface by 1064nm laser
14. Du · 2018
15. Analysis of vibration and ablative mechanism of insulator pollution after pulsed laser cleaning
16. Two new mechanisms for laser cleaning using Nd:YAG sources10.1016/S1296-2074(02)01229-3 ↗
17. Study of adhesion and friction properties a nanoparticle gradient surface: transition from JKR to DMT contact mechanics10.1021/la304226v ↗
18. Effect of pulsing parameters on laser ablative cleaning of copper oxides
19. Elastic constants and thermodynamic properties of Cu, Cu2O and CuO from first-principles calculations
20. Laser cleaning techniques for removal of surface particulates10.1063/1.350906 ↗
21. Simulation of nanosecond laser cleaning the paint based on the thermal stress10.1016/j.ijleo.2020.165589 ↗
22. Temperature field simulation of chalcogenide glass ablation by nanosecond pulsed laser-based on pump–probe technology10.1016/j.optlastec.2021.107771 ↗
23. Experimental and numerical simulation analysis of laser paint removal of aluminum alloy10.2351/7.0000522 ↗
24. Numerical simulation of paint stripping on CFRP by pulsed laser10.1016/j.optlastec.2021.107450 ↗
25. Debris-free femtosecond laser micromachining of stainless steel vascular stent10.3901/JME.2021.05.251 ↗