journal article·2022-03

Experimental study on improving silicon crystal discharge cutting efficiency based on laser irradiation method

Mingbo Qiu, Jinchao Zhao, Zhibin Chen

Publisher page

Abstract

The contact barrier formed between a metal and crystalline silicon during wire electrical discharge machining (wire-EDM) hinders improvements in the processing efficiency; thus, this paper proposes a workpiece pretreatment method that increases the doping concentration of the crystalline silicon surface. First, a silver layer was coated on a silicon surface by silk screen printing, then a laser marking machine was used to irradiate the coating surface. The mechanism of this method to form a heavily-doped layer was analyzed, and the current-voltage (I–V) characteristic curves under different pretreatment processes were compared. Finally, the influence of this method on the machining performance was studied by wire-EDM experiments. The results showed that the doping concentration of the silicon surface increased, and the contact resistance decreased. When the open voltage was 120 V, the cutting efficiency of the workpiece treated with laser irradiation and screen printing was 60% higher than that without pretreatment, and it was 28% higher than the workpiece with only the metal coating treatment; however, the treatment method had little effect on the kerf width or surface roughness. It is hoped that this work will provide useful guidance for improving the EDM efficiency of crystalline silicon.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Machining and Optimization Techniques · Advanced Surface Polishing Techniques · Integrated Circuits and Semiconductor Failure Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (25)

Show source-provided references
1. Global prospects, progress, policies, and environmental impact of solar photovoltaic power generation10.1016/j.rser.2014.08.046 ↗
2. An experimental investigation into soft-pad grinding of wire-sawn silicon wafers10.1016/j.ijmachtools.2003.09.006 ↗
3. Review and development of crystalline silicon solar cell with intelligent materials10.4028/www.scientific.net/AMR.321.196 ↗
4. Recent advances in machining of silicon wafers for semiconductor applications10.1007/s001700170185 ↗
5. Experimental research on semiconductor shaping by abrasive-spark hybrid machining10.1007/s00170-017-1013-7 ↗
6. Fixed abrasive diamond wire saw slicing of single-crystal silicon carbide wafers10.1081/AMP-120029960 ↗
7. Ultra thin silicon wafer slicing using wire-EDM for solar cell application10.1016/j.matdes.2017.03.059 ↗
8. Experimental research of WEDM-HS on monocrystal silicon cutting
9. Single step ohmic contact for heavily doped n-type silicon10.1016/j.apsusc.2019.144686 ↗
10. Investigation of silicon wafering by wire EDM10.1007/BF01119742 ↗
11. Role of Fermi-level pinning in nanotube Schottky diodes10.1103/PhysRevLett.84.4693 ↗
12. Liu · 2011
13. Microstructuring of silicon by electro-discharge machining (EDM) — part I: theory10.1016/S0924-4247(97)01359-9 ↗
14. Improvement of EDM efficiency ofsilicon single crystal through ohmic contact10.1016/S0141-6359(99)00041-0 ↗
15. Towards achieving nanofinish on silicon (Si) wafer by μ-wire electro-discharge machining10.1007/s00170-018-2692-4 ↗
16. Experimental study on improving μ-WEDM and μ-EDM of doped silicon by temporary metallic coating10.1007/s00170-014-6732-4 ↗
17. Effect of metal coating on machinability of high purity germanium using wire electrical discharge machining10.1016/j.jmatprotec.2012.12.008 ↗
18. Study of electrical discharge machining technology for slicing silicon ingots10.1016/S0924-0136(03)00718-0 ↗
19. Discharge cutting technology for specific crystallographic planes of monocrystalline silicon10.1016/j.mssp.2014.07.042 ↗
20. Study of unidirectional conductivity on the electrical discharge machining of semiconductor crystals10.1016/j.precisioneng.2013.05.009 ↗
21. Research on the machining characteristics of composite pulse power supply for the electrical discharge machining of semiconductor silicon crystal
22. Improvement of wire electrical discharge machining efficiency in machining polycrystalline silicon with auxiliary-pulse voltage supply10.1007/s00170-011-3350-2 ↗
23. Study on the high efficiency mechanism in WEDM of semiconductor in micro contact condition
24. Machining characteristics of polycrystalline silicon by wire electrical discharge machining10.1080/10426914.2010.544808 ↗
25. Investigating the effects of EDM parameters on surface integrity, MRR and TWR in machining of Ti-6Al-4V10.1080/10910344.2012.698971 ↗