journal article·2025-08Open access

Study on the photocatalytic performance of photocatalytic fixed polishing plate and its effect on the polishing performance of single-crystal SiC

Chen Lin, Jilong Xie, Jiabin Lu, Qiusheng Yan

Abstract

To efficiently polish single-crystal silicon carbide (SiC), an Ultraviolet photocatalytic (UV-PC) fixed polishing plate containing TiO 2 was developed. The influence of UV-PC parameters on the concentration of hydroxyl radicals (·OH) and the polishing performance of SiC was studied. The influence of photocatalytic parameters, including TiO 2 mass fraction, H 2 O 2 mass fraction, and light intensity, on the concentration of ·OH was investigated using a spectrophotometric system. Based on this, the polishing experiment was conducted on single-crystal SiC. Results show that material removal rate (MRR) and ·OH concentration were significantly correlated. As the mass fraction of TiO 2 , mass fraction of H 2 O 2 , and light intensity increase, the concentration of ·OH radicals initially rises before declining, while the MRR of SiC initially increases before decreasing. Conversely, the surface roughness Ra of SiC exhibits first decreases before increasing. Under the conditions of 10 wt% TiO 2 , 10 wt% H 2 O 2 , and light intensity of 40 mW/cm 2 , the concentration of ·OH was highest, leading to the most significant fading of the methyl orange (MO) solution. Within 40 min, the degradation rate of the MO solution reached 99.3 %. At this time, the MRR of SiC was highest, reaching 4.05 μm/h, and the surface roughness Ra was lowest, at 1.09 nm. Compared to conventional methods without UV-PC processing, the MRR of SiC processed by UV-PC fixed polishing plate is significantly increased by 73.1 %, and peak-valley (PV) value and surface roughness are reduced by 58.1 % and 45.8 %, respectively. These research findings offer essential reference values for developing visible light-assisted SiC chemical mechanical polishing technology.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Advanced Surface Polishing Techniques · Advanced ceramic materials synthesis · ZnO doping and properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (30)

Show source-provided references
1. Environment-friendly chemical mechanical polishing using NaHCO3-activated H2O2 slurry for highly efficient finishing of 4H-SiC (0001) surface10.1016/j.jmapro.2023.12.014 ↗
2. MD simulation of chemically enhanced polishing of 6H-SiC in aqueous H2O210.1016/j.jmapro.2023.10.056 ↗
3. Equilibrium between chemical and mechanical parameters for single-crystal SiC in Electro-Fenton chemical-mechanical polishing10.1016/j.diamond.2025.111979 ↗
4. Cutting mechanism of reaction-bonded silicon carbide in laser-assisted ultra-precision machining10.1016/j.ijmachtools.2024.104219 ↗
5. Effects of chemical action of polishing medium on the material removal of SiC10.1016/j.precisioneng.2024.06.001 ↗
6. Improvement in chemical mechanical polishing of 4H-SiC wafer by activating persulfate through the synergistic effect of UV and TiO210.1016/j.jmatprotec.2021.117150 ↗
7. Nanosecond laser irradiation assisted chemical mechanical polishing (CMP) process for promoting material removal of single crystal 4H–SiC10.1016/j.ceramint.2024.06.277 ↗
8. Preparation of CIP@Fe3O4 particles and their impact on the Fenton reaction processing performance of single-crystal SiC
9. Performance of colloidal silica and ceria based slurries on CMP of Si-face 6H-SiC substrates10.1016/j.apsusc.2015.10.158 ↗
10. Chemical mechanical polishing (CMP) of SiC wafer using photo-catalyst incorporated pad
11. Optimisation of free-abrasive assisted lapping process with vitrified bonded diamond plates for sapphire substrates10.1016/j.precisioneng.2023.12.003 ↗
12. Material removal rate of 6H-SiC crystal substrate CMP using an alumina (Al2O3) abrasive10.1088/1674-4926/33/10/106003 ↗
13. Influences of nonaqueous slurry components on polishing 4H-SiC substrate with a fixed abrasive pad10.3390/cryst13060869 ↗
14. Preparation and processing properties of magnetically controlled abrasive solidification orientation—solid-phase Fenton reaction lapping-polishing plate for single-crystal 4H-SiC
15. High efficiency polishing of silicon carbide by applying reactive non-aqueous fluids to fixed abrasive pads10.1016/j.ceramint.2021.11.288 ↗
16. The influence of concentration of hydroxyl radical on the chemical mechanical polishing of SiC wafer based on the Fenton reaction10.1016/j.precisioneng.2017.12.011 ↗
17. Enhancement mechanism of chemical mechanical polishing for single-crystal 6H-SiC based on Electro-Fenton reaction
18. Tribological behavior of single-crystal diamond in a UV photocatalytic-Fenton composite reaction environment
19. Synergistic effect of photocatalysis and Fenton on improving the removal rate of 4H-SiC during CMP
20. The influences of technological parameters on the ultraviolet photocatalytic reaction rate and photocatalysis-assisted polishing effect for SiC10.1016/j.jcrysgro.2019.125379 ↗
21. Investigation on influence of polishing disc materials in UV-catalytic polishing of single crystal diamond10.1016/j.diamond.2023.110678 ↗
22. Tribological behavior of single crystal diamond based on UV photocatalytic reaction10.1016/j.triboint.2022.107806 ↗
23. Verification of the effectiveness of UV-polishing for 4H-SiC wafer using photocatalyst and cathilon10.20965/ijat.2018.p0160 ↗
24. Investigation on material removal mechanisms in photocatalysis-assisted chemical mechanical polishing of 4H–SiC wafers10.1007/s12541-021-00494-1 ↗
25. UV-TiO2 photocatalysis-assisted chemical mechanical polishing 4H-SiC wafer10.1080/10426914.2017.1364855 ↗
26. Characterization of Fenton reaction-based material removal on single crystal diamond surface10.1016/j.diamond.2022.109320 ↗
27. Titanium dioxide mediated photocatalytic degradation of methamidophos in aqueous phase10.1016/j.jhazmat.2008.07.140 ↗
28. Enhancing CaO2 Fenton-like process by Fe(II)-oxalic acid complexation for organic wastewater treatment10.1016/j.watres.2019.114861 ↗
29. Mechanisms for photo assisted Fenton of synthesized pyrrhotite at neutral pH10.1016/j.apsusc.2018.09.007 ↗
30. Novel visible light enhanced pyrite-Fenton system toward ultrarapid oxidation of p-nitrophenol: catalytic activity, characterization and mechanism10.1016/j.chemosphere.2019.04.103 ↗