journal article·2024-12

The effect of Cu-doping to the DLC interlayer on the temperature dependent current-conduction mechanisms and barrier shape of the Schottky devices

Esra Evcin Baydilli

Publisher page

Abstract

The objective of this study is to determine the temperature and voltage-dependent current conduction mechanisms (CCMs) of the Al/Cu-doped DLC/p-Si Schottky device. It is aimed to obtain extensive and detailed data by current-voltage ( I–V) measurements taken with 0.3 V voltage steps in the ±4 V voltage range, at 30 K intervals from 80 K to 410 K. Firstly, an examination of the semi-logarithmic I–V curve revealed that the low temperature (LTs, 80 K–170 K), medium temperature (MTs, 200 K–290 K) and high temperature (HTs, 320 K–410 K) regions should be examined separately. The basic parameters of the Schottky device such as the ideality factor ( n), reverse saturation current ( I o) and zero-biasing potential barrier height ( Φ Bo) were obtained separately for LTs, MTs and HTs by the Thermionic Emission (TE) theory. The results obtained show that the device deviates from ideality, especially in LTs and HTs, and the n values decrease with increasing temperature, while the Φ Bo values increase. The analysis of the presence of other CTMs in the Schottky device revealed that Field Emission (FE) and Thermionic Field Emission (TFE) were effective in LTs and MTs, while FE was effective in HTs. Since it is thought that quantum mechanical CTMs cannot be the cause of such a deviation from ideality due to the interface layer thickness, the existence of Gaussian Distribution originating from lateral barrier inhomogeneity was investigated. As a result, it is concluded that the Multiple Gaussian Distribution (MGD) is dominant in the possible CTMs of the Schottky device.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Semiconductor materials and interfaces · Silicon and Solar Cell Technologies · Semiconductor materials and devices

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (43)

Show source-provided references
1. The effect of temperature on the reliability of electronic components
2. An overview of high-temperature electronic device technologies and potential applications
3. Gutierrez-D · 2001 · 71
4. The frequency dependent of main electrical parameters, conductivity and surface states in the Al/(%0.5 Bi:ZnO)/p-Si/Au (MIS) structures10.1007/s12633-024-02929-6 ↗
5. Overview of the irradiation-dependent behaviour of the negative dielectric properties of GaAs-based MIS devices10.1016/j.radphyschem.2024.111877 ↗
6. Investigation of gamma-irradiation effects on electrical characteristics of Al/(ZnO–PVA)/p-Si Schottky diodes using capacitance and conductance measurements10.1007/s10854-020-03370-2 ↗
7. On the impact of pure PVC and (PVC: Ti) interlayer on the conduction mechanisms and physical parameters of classic metal-semiconductor (MS) Schottky diodes (SDs)10.1016/j.physb.2024.416173 ↗
8. Investigation of the interface state characteristics of the Al/Al2O3/Ge/p-Si heterostructure over a wide frequency range by capacitance and conductance measurements10.1016/j.mssp.2023.107951 ↗
9. Temperature-dependent electrical properties of Schottky barrier diodes based on carbon nanotube arrays10.1007/s10854-023-10447-1 ↗
10. The effect of (CeO2: PVC) thin interfacial film on the electrical features in Au/n-Si Schottky barrier diodes (SBDs) by using current-voltage measurements10.1007/s10854-023-10094-6 ↗
11. Sm · 2007 · 134
12. Rhoderick · 1988 · 284
13. Surface states and barrier height of metal‐semiconductor systems10.1063/1.1702952 ↗
14. Detection of current transport mechanisms for graphene-doped-PVA interlayered metal/semiconductor structures10.1016/j.physb.2020.412457 ↗
15. The determination of the temperature and voltage dependence of the main device parameters of Au/7%Gr-doped PVA/n-GaAs-type Schottky Diode (SD)10.1007/s10854-020-03799-5 ↗
16. On the multi-parallel diodes model in Au/PVA/n-GaAs Schottky diodes and investigation of conduction mechanisms (CMs) in a temperature range of 80–360 K10.1007/s11664-020-08473-4 ↗
17. Multi-Gaussian distribution of barrier height in diamond-like carbon interfacial-layered Schottky devices10.1016/j.mssp.2024.108380 ↗
18. Study of structure, tribological properties and growth mechanism of DLC and nitrogen-doped DLC films deposited by electrochemical technique10.1016/j.apsusc.2004.05.005 ↗
19. On frequency and voltage dependent physical characteristics and interface states characterization of the metal semiconductor (MS) structures with (Ti:DLC) interlayer10.1016/j.physb.2023.415099 ↗
20. The investigation of frequency dependent dielectric properties and ac conductivity by impedance spectroscopy in the Al/(Cu-doped Diamond like Carbon)/Au structures10.1007/s10854-023-10546-z ↗
21. Evaluation of the current transport mechanism depending on the temperature of Schottky structures with Ti:DLC interlayer
22. Frequency-dependent electrical parameters and extracted voltage-dependent surface states in Al/DLC/p-Si structure using the conductance method10.1007/s00339-023-06639-5 ↗
23. On the wide range frequency and voltage dependence of electrical features and density of surface states of the Al/(Cu:DLC)/p-Si/Au Schottky diodes (SDs)10.1007/s10854-023-10247-7 ↗
24. The birth of electronics: thermionic emission and vacuum10.1116/1.581157 ↗
25. Temperature dependent current-transport mechanism in Au/(Zn-doped)PVA/n- GaAs Schottky barrier diodes (SBDs)10.1016/j.sna.2013.05.027 ↗
26. The investigation of current-transport mechanisms (CTMs) in the Al/(In 2 S 3 :PVA)/p-Si (MPS)-type Schottky barrier diodes (SBDs) at low and intermediate temperatures10.1007/s10854-023-10592-7 ↗
27. Identification of current transport mechanisms and temperature sensing qualifications for Al/(ZnS-PVA)/p-Si structures at low and moderate temperatures10.1109/JSEN.2021.3127130 ↗
28. Determination of temperature sensitivity and current-transport mechanisms of the GaAs-based MS contact
29. Double Gaussian distribution of inhomogeneous barrier height in (Ni-Au)/Al 0.25 Ga 0.75 N/GaN10.1007/s13538-022-01240-2 ↗
30. Machine learning approach for predicting electrical features of Schottky structures with graphene and ZnTiO 3 nanostructures doped in PVP interfacial layer
31. Sharma · 2013 · vols. 1–60 · 113
32. Effect of substrate thinning on heavy ion induced single event effect in silicon carbide power junction barrier Schottky diodes10.1016/j.microrel.2023.115197 ↗
33. Materials impact of surface states in graphene/p-Si Schottky diodes10.3390/ma17091997 ↗
34. Exploration of current–voltage (I–V) behaviour of Au/SnO2/n-type InP heterojunction in the temperature range of 200–400 K10.1007/s12648-022-02460-7 ↗
35. Correlation between barrier height and interface structure of Ag Si(111) Schottky diodes10.1016/0039-6028(94)00791-8 ↗
36. Multiple-barrier distribution behavior of Mo/p-GaTe fabricated with sputtering10.1016/j.jallcom.2011.03.170 ↗
37. Barrier inhomogeneities at Schottky contacts10.1063/1.347243 ↗
38. Electrical properties and the role of inhomogeneities at the polyvinyl alcohol/n-inp Schottky barrier interface10.1002/app.39773 ↗
39. Inhomogeneities in Ni4H-SiC Schottky barriers: localized Fermi-level pinning by defect states10.1063/1.2745436 ↗
40. Generalized Norde plot including determination of the ideality factor10.1063/1.337372 ↗
41. On the difference in apparent barrier height as obtained from capacitance-voltage and current-voltage-temperature measurements on Al/p-InP Schottky barriers10.1016/0038-1101(86)90145-0 ↗
42. Evidence for the double distribution of barrier heights in Pd2Si/n-Si Schottky diodes from I-V-T measurements10.1088/0268-1242/11/8/015 ↗
43. Barrier heights of real Schottky contacts explained by metal-induced gap states and lateral inhomogeneities10.1116/1.590839 ↗