Effect of flux rate on the growth of AlN films on sapphire by MNVPE
Source abstract
Abstract
Aluminum nitride (AlN) is an ideal material for the preparation of devices such as deep ultraviolet light-emitting diodes (UV-LEDs) and vacuum detectors because of its wide forbidden bandwidth and excellent physical properties. The quality of AlN films determines the durability and reliability of these devices, and the gas flow rate is an important process parameter that determines the quality of the films. in this paper, metal nitride vapor phase epitaxy (MNVPE) was used to prepare AlN films on sapphire substrates. Firstly, based on the three-dimensional (3D) computational fluid dynamics (CFD) model, the film growth rate and uniformity were investigated at different V/III ratios, and the film quality was best at V/III = 4420. The flow field was analyzed by continuing to adjust the flow rates of Ar and N 2 for different gas flow rates at the same V/III ratio, and the results showed that the appearance of vortices had a great influence on the subsequent surface morphology. The crystalline quality, surface morphology, root mean square roughness, and residual stress of the AlN films grown at different gas flow rates were investigated using scanning electron microscopy (SEM), atomic force microscopy (AFM), X-ray diffractometer (XRD) and Raman spectroscopy. The results showed that the best surface roughness, crystalline quality, and the lowest residual stress were obtained when the Ar flow rate was 0.25 SLM and the N 2 flow rate was 2.5 SLM. The best root-mean-square roughness and crystalline quality obtained under (0002) symmetric reflection conditions were 11 nm and 357 arcsec, respectively.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: GaN-based semiconductor devices and materials · Plasma Diagnostics and Applications · Surface Modification and Superhydrophobicity
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (33)
Show source-provided references
1. AIN nanostructures fabricated on a vicinal sapphire (0001) substrate10.1021/cg5016274 ↗
2. Low temperature deposition of high quality single crystalline AlN thin films on sapphire using highly oriented monolayer MoS2 as a buffer layer10.1016/j.jcrysgro.2020.125726 ↗
3. High-aspect-ratio single-crystalline AlN nanowires: free-catalytic PVT growth and field-emission studies10.1016/j.jallcom.2019.04.250 ↗
4. Low-temperature epitaxial growth of AlN thin films on a Mo electrode/sapphire substrate using reactive sputtering10.3390/coatings11040443 ↗
5. Deposit of AlN thin films by nitrogen reactive pulsed laser ablation using an Al target
6. Room-temperature epitaxial growth of AlN films10.1063/1.1509863 ↗
7. Jh A, Qi J, Mu T, et al. Investigation on halide vapor phase epitaxial growth of AlN using N2 as N source[J]. J. Cryst. Growth, 536: 125567.10.1016/j.jcrysgro.2020.125567 ↗
8. Power enhancement of 265 nm DUV-LED flip-chip by HVPE-AlN high-temperature annealing10.3390/mi14020467 ↗
9. Four-inch high quality crack-free AlN layer grown on a hightemperature annealed AlN template by MOCVD10.1088/1674-4926/42/12/122804 ↗
10. PVT growth of bulk AlN crystals with low oxygen contamination
11. Prismatic slip in AlN crystals grown by PVT10.1149/10407.0057ecst ↗
12. Growth of an AlN epilayer by using mixed-source hydride vapor phase epitaxy10.3938/NPSM.68.39 ↗
13. Epitaxial growth of AlN on (0001) sapphire: assessment of HVPE process by a design of experiments approach10.3390/coatings7090136 ↗
14. Comparative spectroscopic study of aluminum nitride grown by MOCVD in H2 and N2 reaction environment10.3390/coatings12070924 ↗
15. High-quality AlN nucleation layer on SiC substrate grown by MOVPE: growth, structural and optical characteristics10.1016/j.mseb.2022.115635 ↗
16. Native oxide and hydroxides and their implications for bulk AlN crystal growth10.1016/j.jcrysgro.2008.06.014 ↗
17. Epitaxial and polycrystalline growth of AlN by high temperature CVD: experimental results and simulation10.1016/j.surfcoat.2010.08.049 ↗
18. Control of crystal morphologies and interface structures of AlN grown on sapphire by elementary source vapor phase epitaxy10.1021/acs.cgd.6b00979 ↗
19. Progress in modeling of III-nitride MOVPE10.1016/j.pcrysgrow.2020.100486 ↗
20. AlN thin films grown on different substrates by metal nitride vapor phase epitaxy10.1002/crat.202200196 ↗
21. Structure and optical properties of AlN crystals grown by metal nitride vapor phase epitaxy with different V/III ratios10.1021/acsomega.2c01890 ↗
22. A realizable explicit algebraic Reynolds stress model for compressible turbulent flow with significant mean dilatation10.1063/1.4825282 ↗
23. CFD modeling of the high-temperature HVPE growth of aluminum nitride layers on c-plane sapphire: from theoretical chemistry to process evaluation
24. Analyzing industrial CVD reactors using a porous media approach10.1016/j.cej.2021.129038 ↗
25. Computer simulation of horizontal VPE grown AlN10.4028/www.scientific.net/MSF.999.129 ↗
26. Numerical investigations of geometric effects on flow and thermal fields in a horizontal CVD reactor10.1016/j.jcrysgro.2008.03.007 ↗
27. Effect of embedding a porous medium on the deposition rate in a vertical rotating MOCVD reactor based on CFD modeling10.1016/j.icheatmasstransfer.2009.03.019 ↗
28. A column-oriented optimization approach for the generation of correlated random vectors
29. Effect of flux rate on AlN epilayers grown by hydride vapor phase epitaxy
30. Micro-Raman-scattering study of stress distribution in GaN films grown on patterned Si(111) by metal-organic chemical-vapor deposition10.1063/1.1856211 ↗
31. Investigation of hydride vapor phase epitaxial growth of AlN on sputtered AlN buffer layers10.1039/C8CE02192A ↗
32. Growth, structural and electrical properties of AlN/Si (111) for futuristic MEMS applications
33. Raman scattering spectroscopy of residual stresses in epitaxial AlN films