Intelligent identification of material removal behavior during scratching of 4H-SiC based on acoustic emission sensing and unsupervised deep learning
Source abstract
Abstract
This research presents an intelligent methodology to identify the material removal behavior during scratching of 4H-SiC based on acoustic emission sensing and unsupervised deep learning. A dedicated high speed scratching setup is developed, and the scratching depth is adjusted to selectively activate different material removal modes of 4H-SiC during scratching process. The material removal behavior changes from ductile deformation to brittle fracture with the scratching depth increasing from 50 nm to 400 nm at a constant scratching speed of 20 m/s. To differentiate various acoustic emission sources, an unsupervised convolutional auto-encoder and k-mean clustering methodology is employed. One-dimensional convolutional autoencoder is used for adaptive extraction of acoustic emission signal features, while k-means clustering algorithm is used to analyze material removal modes and damage types based on the extracted signal characteristics. Combined with material removal characterization, the appearance of specific clusters in different scratching tests is leveraged to map acoustic emission data to machining patterns. The results show that different acoustic emission signal features exhibit varying sensitivity to the damage formation during high-speed scratching of 4H-SiC. The parameters of amplitude, energy, and count are identified as the optimal characteristic parameters for distinguishing material removal modes and damage types for 4H-SiC. The acoustic emission sensing and deep learning approach presented in this study can be used to construct a real-time nondestructive tool to characterize and monitor material removal behavior during manufacturing processes.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Surface Polishing Techniques · Advanced machining processes and optimization · Advanced Machining and Optimization Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (28)
Show source-provided references
1. Experimental investigation of surface/subsurface damage formation and material removal mechanisms in SiC grinding10.1016/j.ijmachtools.2007.10.013 ↗
2. Material removal mechanism and subsurface characteristics of silicon 3D nanomilling10.1016/j.ijmecsci.2022.108020 ↗
3. Identification of subsurface damage of 4H-SiC wafers by combining photo-chemical etching and molten-alkali etching10.1088/1674-4926/43/10/102801 ↗
4. Effect of tool geometry on ultraprecision machining of soft-brittle materials: a comprehensive review10.1088/2631-7990/acab3f ↗
5. Graphene nanoribbons on vicinal SiC surfaces by molecular beam epitaxy
6. Improvement mechanism of brittle-plastic transition and residual stress in scratching 4H–SiC implanted by hydrogen ions10.1016/j.ceramint.2022.06.019 ↗
7. Nanoscale structural characterization of epitaxial graphene grown on off-axis 4H-SiC (0001)10.1186/1556-276X-6-269 ↗
8. Precision grinding technology of silicon carbide (SiC) ceramics by longitudinal torsional ultrasonic vibrations10.3390/ma16165572 ↗
9. A model for prediction of subsurface damage in rotary ultrasonic face milling of optical K9 glass10.1007/s00170-015-7567-3 ↗
10. Effect of grinding wheel spindle vibration on surface roughness and subsurface damage in brittle material grinding10.1016/j.ijmachtools.2015.01.003 ↗
11. Surface acoustic wave propagation properties of 3C-SiC epitaxial films on Si (100)
12. High sensitivity X-ray detectors based on 4H-SiC pin structure with 80 μm thick intrinsic layer10.1116/6.0000829 ↗
13. Revealing irradiation damage along with the entire damage range in ion-irradiated SiC/SiC composites using Raman spectroscopy10.1016/j.jnucmat.2019.151778 ↗
14. I n situ observation of a phase transition in silicon carbide under shock compression using pulsed x-ray diffraction10.1103/PhysRevB.99.214106 ↗
15. X-ray diffraction analysis of damaged layer during polishing of silicon carbide10.1007/s12541-022-00711-5 ↗
16. Machinability improvement of silicon carbide via femtosecond laser surface modification method10.1007/s00339-018-2377-8 ↗
17. Defect inspection techniques in SiC10.1186/s11671-022-03672-w ↗
18. Radiation defects in heterostructures 3C-SiC/4H-SiC10.3390/cryst9020115 ↗
19. Monitoring of ductile–brittle transition mechanisms in sapphire ultra-precision grinding used small grit size grinding wheel through force and acoustic emission signals10.1016/j.measurement.2023.112557 ↗
20. On the importance of combined scratch/acoustic emission test evaluation: SiC and SiCN thin films case study10.3390/coatings8050196 ↗
21. A multiscale indentation-based technique to correlate acoustic emission with deformation mechanisms in complex alloys10.1016/j.matchar.2021.111575 ↗
22. High-resolution acoustic emission monitoring in nanomechanics
23. Benefits of use of acoustic emission in scratch testing
24. Experimental investigation on the machining characteristics of single-crystal SiC sawing with the fixed diamond wire10.1007/s00170-015-7250-8 ↗
25. Study on the subsurface microcrack damage depth in electroplated diamond wire saw slicing SiC crystal10.1016/j.ceramint.2018.09.088 ↗
26. Strain rate effect on material deformation and removal behavior during high speed scratching of 4H‐SiC10.1016/j.triboint.2023.108756 ↗
27. Data clustering: 50 years beyond K-means10.1016/j.patrec.2009.09.011 ↗
28. On acoustic emission for damage detection and failure prediction in fiber reinforced polymer rods using pattern recognition analysis10.1088/1361-665X/aa6e43 ↗