Selective dry etching of silicon with heat-mode resist GeSb for the preparation of metasurfaces
Source abstract
Abstract
A simple and effective method to prepare micro-/nano-structures on silicon surfaces through the inorganic resist GeSb was proposed and investigated in this paper. Combined with the laser heat-mode lithography and the plasma etching, high-resolution relief patterns with a minimum linewidth of 165 nm, which is much smaller than the diffraction limit of the exposure system, have been obtained on silicon substrates. The etching selectivity of Si to GeSb reaches up to 17.3:1 and the anti-etching mechanism of GeSb was analyzed by X-ray photoelectron spectroscopy. Moreover, a silicon metalens structure was fabricated successfully to confirm the effectiveness of this method for the fabrication of silicon-based metasurfaces.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metamaterials and Metasurfaces Applications · Photonic and Optical Devices · Plasmonic and Surface Plasmon Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (42)
Show source-provided references
1. Ultra-thin plasmonic optical vortex plate based on phase discontinuities10.1063/1.3673334 ↗
2. Flat optics with dispersion-engineered metasurfaces10.1038/s41578-020-0203-3 ↗
3. Reprogrammable meta-hologram for optical encryption10.1038/s41467-020-19312-9 ↗
4. Broadband high-efficiency chiral splitters and holograms from dielectric nanoarc metasurfaces
5. Full-color hologram using spatial multiplexing of dielectric metasurface10.1364/OL.41.000147 ↗
6. Broadband achromatic optical metasurface devices10.1038/s41467-017-00166-7 ↗
7. Single-step manufacturing of hierarchical dielectric metalens in the visible10.1038/s41467-020-16136-5 ↗
8. Near-zero reflection of all-dielectric structural coloration enabling polarization-sensitive optical encryption with enhanced switchability10.1515/nanoph-2020-0440 ↗
9. Nearly perfect transmissive subtractive coloration through the spectral amplification of mie scattering and lattice resonance10.1021/acsami.1c03427 ↗
10. Broadband achromatic dielectric metalenses10.1038/s41377-018-0078-x ↗
11. Printable nanocomposite metalens for high contrast near-infrared imaging10.1021/acsnano.0c06968 ↗
12. High-efficiency all-dielectric metalenses for mid-infrared imaging10.1002/adom.201700585 ↗
13. Dielectric gradient metasurface optical elements
14. Multiwavelength achromatic metasurfaces by dispersive phase compensation
15. A high numerical aperture, polarization-insensitive metalens for long-wavelength infrared imaging10.1063/1.5050562 ↗
16. Large-area metasurfaces produced with nm precision by UV nanoimprint lithography
17. Thermal lithography for 0.1 μm pattern fabrication10.1016/S0167-9317(02)00435-5 ↗
18. Wei · 2019
19. High-speed maskless nanolithography with visible light based on photothermal localization
20. Nanoscale-patterned Cr films by selective etching using a heat-mode resist: implications for X-ray beam splitter10.1021/acsanm.1c03707 ↗
21. Ge2Sb2Te5 thin film as a promising heat-mode resist for high-resolution direct laser writing lithography10.1002/pssr.202300262 ↗
22. Ge2Sb1.5Bi0.5Te5 thin film as inorganic photoresist10.1364/OME.2.000461 ↗
23. AgGeSbTe thin film as a negative heat-mode resist for dry lithography10.3788/COL202220.031601 ↗
24. Deep dry etching patterned silicon using GeSbSnOx thermal lithography photoresist10.1109/TMAG.2010.2099110 ↗
25. Laser heat-mode patterning with improved aspect-ratio10.1016/j.mssp.2021.106018 ↗
26. Selective etching characteristics of the AgInSbTe phase-change film in laser thermal lithography10.1007/s00339-011-6746-9 ↗
27. Wet etching of Ge2Sb2Te5 films and switching properties of resultant phase change memory cells10.1088/0268-1242/20/11/002 ↗
28. Fabrication of micro/nano multifunctional patterns on optical glass through chalcogenide heat-mode resist AgInSbTe10.1016/j.jallcom.2021.158988 ↗
29. Ge-Sb thin films patterned by heat-mode lithography10.1002/pssr.202100545 ↗
30. Design and development of high speed laser direct writing thermal mode lithography system
31. Alignment method for rotary stage axis and optical axis in the polar coordinate direct laser writing system10.1117/1.OE.61.3.034104 ↗
32. Experimental evaluation of inductively coupled plasma deep silicon etching
33. A systematic study of DRIE process for high aspect ratio microstructuring10.1016/j.vacuum.2010.01.052 ↗
34. GeTe photoresist films for both positive and negative heat-mode nanolithography10.1016/j.matlet.2019.127019 ↗
35. Investigation of etching selectivity and microstructure of Ag-doped Sb2Te thin film for dry lithography10.1088/1361-6641/ac3c98 ↗
36. XPS study on the selective wet etching mechanism of GeSbTe phase change thin films with tetramethylammonium hydroxide
37. Change in local atomic and chemical bonding structures of Ge2Sb2Te5 alloys by isothermal heat treatment10.1016/j.tsf.2008.02.051 ↗
38. SbF3: a new second-order nonlinear optical material10.1016/j.optmat.2008.01.018 ↗
39. Vertical sidewall of silicon nitride mask and smooth surface of etched-silicon simultaneously obtained using CHF3/O2 inductively coupled plasma10.1016/j.vacuum.2022.111650 ↗
40. Fluorocarbon assisted atomic layer etching of SiO2 and Si using cyclic Ar/C4F8 and Ar/CHF3 plasma10.1116/1.4935462 ↗
41. A step-by-step guide to perform x-ray photoelectron spectroscopy
42. C1s peak of adventitious carbon aligns to the vacuum level:dire consequences for material’s bonding assignment by photoelectron spectroscopy10.1002/cphc.201700126 ↗