journal article·2024-11

Thermal cycling simulation and fatigue lifetime estimation of Si3N4-AMB substrates

Dongya Li, Zhenliang Ma, Huaping Yang, Chenglai Xin, Qingyuan Wang

Publisher page

Abstract

This study investigates the failure mechanism of silicon nitride active metal brazing (Si 3N 4-AMB) ceramic substrates under high and low temperature cycling using numerical simulation. The Chaboche nonlinear kinematic hardening constitutive model was employed to characterize the elastoplastic behavior of ductile Cu, and ANSYS was used to simulate and analyze the Si 3N 4-AMB substrates under thermal cycling conditions (−30 °C–150 °C). The analysis focused on the transient internal warpage, local stress, and strain distribution within the substrates. It was found that the maximum axial stress is concentrated on the ceramic side, while the maximum equivalent plastic strain is concentrated at the Cu corner. The thicknesses of the ceramic and metal have a significant impact on the residual stress and plastic strain. Based on FE results, the lifetime of the substrate was assessed using an improved Coffin-Manson law. We found that the Si 3N 4-AMB substrate with a 0.1 mm thick Cu layer and a 0.3 mm thick Si 3N 4 layer has the highest fatigue life, reaching approximately 6685 cycles. Reducing the thickness of the Cu layer has a more significant effect on increasing life than increasing the thickness of the Si 3N 4 layer. This rapid, low-cost method of material analysis and fatigue life prediction provide data support and a theoretical foundation for the reliability research of ceramic substrates.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced ceramic materials synthesis · Aluminum Alloys Composites Properties · Intermetallics and Advanced Alloy Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (49)

Show source-provided references
1. Survey of high-temperature reliability of power electronics packaging components10.1109/TPEL.2014.2357836 ↗
2. Heat dissipation design for a high density-high power chip package
3. Integrated vapor chamber heat spreader for power module applications
4. Patrick, reliability of power electronics under thermal loading
5. Warpage variations of Si/solder/OFHC-Cu layered plates subjected to cyclic thermal loading10.1016/j.microrel.2011.07.033 ↗
6. Characterisation of power modules ceramic substrates for reliability aspects10.1016/j.microrel.2009.06.026 ↗
7. Optimization for warpage and residual stress due to reflow process in IGBT modules based on pre-warped substrate10.1016/j.mee.2015.04.019 ↗
8. Modeling and simulation for microelectronic packaging assembly
9. Development of an extreme temperature range silicon carbide power module for aerospace applications
10. Stress evolution during thermal cycling of copper/polyimide layered structures10.1016/j.mssp.2014.08.022 ↗
11. Automotive power module packaging: current status and future trends
12. An optimal structural design to improve the reliability of Al2O3-DBC substrates under thermal cycling10.1016/j.microrel.2015.11.013 ↗
13. Additive manufacturing of aluminum nitride ceramics with high thermal conductivity via digital light processing
14. Preparation of high thermal conductivity aluminium nitride ceramics with low oxygen impurity for power semiconductors
15. Improved resistance to thermal fatigue of active metal brazing substrates for silicon carbide power modules using tough silicon nitrides with high thermal conductivity10.1016/j.ceramint.2018.02.072 ↗
16. Effects of extreme temperature swings (-55°C to 250°C) on silicon nitride active metal brazing substrates10.1109/TDMR.2014.2320057 ↗
17. Effect of high temperature cycling on both crack formation in ceramics and delamination of copper layers in silicon nitride active metal brazing substrates10.1016/j.ceramint.2017.01.020 ↗
18. A novel nano Cu/Ti–Si3N4 ceramic substrates fabricated by spark plasma sintering and its bonding mechanism10.1016/j.vacuum.2021.110093 ↗
19. A review on the wettability and residual stress of AMB AlN/metal joints
20. Effects of extreme temperature swings (-55°C to 250°C) on silicon nitride active metal brazing substrates10.1109/TDMR.2014.2320057 ↗
21. Thermal shock performance of DBA/AMB substrates plated by Ni and Ni–P layers for high-temperature applications of power device modules
22. Comparison of silicon nitride DBC and AMB substrates for different applications in power electronics
23. Finite element analysis of the effect of TiC or graphite modified composite fillers on the thermal residual stress of AMB ceramic substrates10.1016/j.ceramint.2019.06.155 ↗
24. Mechanical design and analysis of direct-plated-copper aluminum nitride substrates for enhancing thermal reliability10.1016/j.microrel.2015.08.010 ↗
25. Thermal fatigue failure mechanism in the joint of nano Cu/Ti–Si3N4 ceramic substrates after thermal fatigue test10.1016/j.ceramint.2024.01.285 ↗
26. Improving the reliability of power modules through layered diffusion solder interconnects – comparative study based on experiments and FE-simulation10.1016/j.microrel.2023.115097 ↗
27. Design and performance evaluation of Al2O3-SiC composite for direct-bonded copper substrate10.1007/s11665-018-3702-2 ↗
28. Thermal ratcheting of solder-bonded elastic and elastoplastic layers10.1016/j.ijplas.2007.12.008 ↗
29. Experimental investigation and numerical modelling of the cyclic plasticity and fatigue behavior of additively manufactured 316 L stainless steel10.1016/j.ijplas.2024.103966 ↗
30. Constitutive equations for cyclic plasticity and cyclic viscoplasticity10.1016/0749-6419(89)90015-6 ↗
31. Continuum damage based constitutive equations for copper under high temperature creep and cyclic plasticity
32. Joining of carbon fibre-reinforced silicon nitride composites with 72Ag-26Cu-2Ti filler metal10.1007/BF00366362 ↗
33. The microstructural evolution and formation mechanism in Si3N4/AgCuTi/Kovar braze joints10.1016/j.jallcom.2019.153189 ↗
34. Fabrication and joining mechanism of Nano-Cu/Si3N4 ceramic substrates10.1016/j.ceramint.2020.09.186 ↗
35. To extend Suhir theory for predicting thermally-induced warpage of flip-chip packages
36. Microstructure and mechanical properties of Si3N4/42CrMo joints brazed with TiNp modified active filler10.1016/j.ceramint.2013.12.008 ↗
37. Cyclic thermal stress-induced degradation of Cu metallization on Si3N4 substrate at -40°C to 300°C10.1007/s11664-014-3357-1 ↗
38. Study on creep-fatigue mechanical behavior and life prediction of Ti2AlNb-based alloy10.3390/ma15186238 ↗
39. Kinematic hardening rules for simulation of ratchetting behavior
40. Ratcheting behavior of sintered copper joints for electronic packaging10.1109/TCPMT.2021.3070020 ↗
41. Effect of repeated thermal cycles on thermal stress in copper paste films on alumina substrates10.1007/s10854-016-4858-x ↗
42. Influence of asymmetric cyclic loading on substructure formation and ratcheting fatigue behaviour of AISI 304LN stainless steel10.1016/j.msea.2010.07.107 ↗
43. Failure analysis on the abnormal cracking of Si3N4 ceramic substrates for SiC power modules in new energy vehicles10.1016/j.microrel.2024.115373 ↗
44. Physics-of-failure assessment methodology for power electronic systems10.1016/j.microrel.2014.07.123 ↗
45. The effect of Mo particles addition in Ag-Cu-Ti filler alloy on Ti (C, N)-Based cermet/45 steel-brazed joints10.1007/s11665-018-3339-1 ↗
46. Crack initiation and propagation mechanism of Al2O3-DBC substrate during thermal cycling test10.1016/j.engfailanal.2020.104720 ↗
47. Coffin · 1962
48. A unified expression for low cycle fatigue and extremely low cycle fatigue and its implication for monotonic loading10.1016/j.ijfatigue.2008.03.004 ↗
49. The applicability of the Manson–Coffin law and Miner's law to extremely low cycle fatigue10.1299/kikaia.53.1178 ↗