journal article·2024-10

An eddy current sensor for end-point detection in chemical mechanical planarization using composition signal filtration and a digital potentiometer

Seungjun Oh, Eungchul Kim, Hyunmo An, Bo-un Yoon, Kihoon Jang, Donghoon Kwon, Wonkeun Cho, Taesung Kim

Publisher page

Abstract

End-point detection (EPD) is important for controlling the chemical mechanical polishing process to prevent underpolishing and overpolishing. One EPD method using the relative current density on a Cu wafer involves an eddy current, which has advantages of noncontact and a fast response speed. However, the eddy current method has a large mean error at a low relative current density. To overcome the disadvantage, composition signal filtration uses a high mean error and long delay time using a moving average and 1-D Kalman filtration. After applying composition filtration, the mean error improved by approximately 94.7 %. Still, it is difficult to measure a thickness of 4000 Å or less with existing systems. A digital potentiometer was developed that changed the resistance in real time and improved the detection range. The step number for changing the resistance was 120 steps in the resistance range of 100–5000 Ω at approximately 40 Ω/step. When a digital potentiometer was applied, the EPD detection range improved by 85.8 % over the existing system. In other words, the developed system could measure a Cu wafer thickness of 586 Å.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Surface Polishing Techniques · Advanced Measurement and Metrology Techniques · Surface Roughness and Optical Measurements

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (19)

Show source-provided references
1. Engineering surface texture of pads for improving CMP performance of Sub-10 nm nodes10.1149/2162-8777/abbcb5 ↗
2. Material removal mechanism in chemical mechanical polishing: theory and modeling10.1109/66.920723 ↗
3. A chemical mechanical polishing model incorporating both the chemical and mechanical effects10.1016/j.tsf.2003.09.060 ↗
4. Prediction of material removal rate in chemical mechanical polishing via residual convolutional neural network10.1016/j.conengprac.2020.104673 ↗
5. Dishing effects in a chemical mechanical polishing planarization process for advanced trench isolation10.1063/1.107586 ↗
6. In-situ CMP endpoint detection using acoustic emission10.1016/j.procir.2014.03.025 ↗
7. In situ endpoint detection by pad temperature in chemical-mechanical polishing of copper overlay10.1109/TSM.2004.826933 ↗
8. Friction-based in situ endpoint detection of copper CMP process
9. Research on multi-method endpoint detection in chemical mechanical planarization process."
10. Application of an eddy-current method to measure electrical conductivity of thin films
11. A thickness measurement system for metal films based on eddy-current method with phase detection10.1109/TIE.2017.2650861 ↗
12. Thickness measurement based on eddy current sensor with coaxial double coil for chemical mechanical polishing10.1109/TIM.2022.3216413 ↗
13. Faraday's law, Lenz's law, and conservation of energy10.1119/1.1646131 ↗
14. Intensive study of skin effect in eddy current testing with pancake coil10.1109/TMAG.2017.2669181 ↗
15. Ultrastable eddy current displacement sensor working in harsh temperature environments with comprehensive self-temperature compensation10.1016/j.sna.2014.03.008 ↗
16. Jan · 2000
17. On the theory of optimal non-linear filtering of random functions
18. Zarchan · 2005 · vol. 208
19. Lunca · 2012