journal article·2024-10

Upcycling spent Ni–Cd battery for selective synthesis of nanoparticles to harness into electro-conductive thin films: An eco-friendly approach for e-waste management

Anum Mahmood, Rohama Gill, Muhammad Raffi

Publisher page

Abstract

Inspired by Sustainable Development Goal-12 (responsible consumption and production) to reduce e-waste, an environment friendly extraction of Cd, Ni and Co from Ni–Cd spent batteries have been reported here using ammonium chloride as a chlorinating agent for the first time. Multiple parameters i.e. dose of chlorinating agent, roasting time, and temperature has been optimized that resulted in extraction of 99.93 % Cd, 90.1 % Ni and 84.81 % Co. Metal enriched leachate was then subjected to unique precipitation steps that resulted in synthesis of Cd nanoparticles, Co 3O 4 ·NiO composite nanoparticles, and NiO nanoparticles, characterized through XRD and FESEM-EDX. Synthesized nanoparticles were further employed in the fabrication of electro-conductive nano thin films via Layer by Layer (LbL) technique. Film buildup of six novel architectures was monitored using an Ellipsometer. Homogenous film growth was tailored by optimizing ratio, concentration and dipping time of nanoparticles and polymer solutions. Conductivity studies revealed that imbedding synthesized nanoparticles impart significant conductive behavior in thin films with maximum conductivity of 1.8 × 10 −4 S/cm, in addition to exhibiting appreciable resistance against 0.1 M HCl, 0.1 M NaOH and acetone. Contact angle and AFM images revealed that the films were slightly wettable and homogenous respectively. Conclusively not only Cd, Ni and Co were successfully recycled from Ni–Cd spent batteries employing greener technique but were also harnessed into robust nano-thin films with focus towards electro-conductivity based applications.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Recycling and Waste Management Techniques · Extraction and Separation Processes · Advancements in Battery Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (64)

Show source-provided references
1. Nickel–cadmium batteries
2. Recycling technologies, policies, prospects, and challenges for spent batteries10.1016/j.isci.2023.108072 ↗
3. Green and sustainable route for the efficient leaching and recovery of valuable metals from spent Ni− Cd batteries10.1016/j.cej.2022.140626 ↗
4. Life cycle inventory of recycling portable nickel–cadmium batteries
5. Lung cancer findings from the NIOSH study of United States cadmium recovery workers: a cautionary note10.1136/oem.51.2.139 ↗
6. IARC carcinogen update10.1289/ehp.113-a580 ↗
7. Nickel carcinogenesis
8. Electrostatic separation for recycling conductors, semiconductors, and nonconductors from electronic waste10.1021/es301830v ↗
9. A novel process for recovering valuable metals from waste nickel− cadmium batteries10.1021/es901659n ↗
10. Leaching kinetics of spent nickel–cadmium battery in sulphuric acid10.1016/j.hydromet.2015.09.011 ↗
11. Export of electronics equipment waste10.1179/oeh.2008.14.1.1 ↗
12. Hydrometallurgical valorization of spent Ni-Cd batteries using organic acids as selective leaching agents
13. Recycling of spent nickel–cadmium batteries based on bioleaching process10.1016/S0956-053X(03)00068-0 ↗
14. Recycling of Zn-C and Ni-Cd spent batteries using Cyphos IL 104 via hydrometallurgical route10.1016/j.jclepro.2017.10.129 ↗
15. Recycling of nickel–cadmium batteries using coal as reducing agent10.1016/j.jpowsour.2005.07.061 ↗
16. Efficient removal of lead impurity for the purification and recycling of nickel from secondary sources based on ball-milling activated CaCO310.1016/j.jece.2021.106737 ↗
17. Eco-friendly recovery of metals from waste mobile printed circuit boards using low temperature roasting10.1016/j.jhazmat.2020.122642 ↗
18. Fabrication of electro-conductive thin films of nanoparticles and MXene sheets using reclaimed Zn, Mn, and C from spent batteries10.1016/j.diamond.2023.110387 ↗
19. Ensnaring animate-inanimate toxins using ZnO–MgO@ Elastomer thin films with self-cleaning and regenerative properties10.1016/j.eti.2021.102011 ↗
20. Chitin based multi-layered coatings with flame retardancy an approach to mimic nacre: synthesis, characterization and mechanical properties10.1016/j.carbpol.2022.119488 ↗
21. Thermally stable thin film composite polymeric membranes for water treatment: a review10.1016/j.jclepro.2019.119447 ↗
22. Nanoparticles in polyelectrolyte multilayer layer-by-layer (LbL) films and capsules: key enabling components of hybrid coatings10.3390/coatings10111131 ↗
23. Photoelectrocatalytic degradation of rhodamine B by spray deposited Bi2WO6 photoelectrode under solar radiation
24. Fuzzy nanoassemblies: toward layered polymeric multicomposites10.1126/science.277.5330.1232 ↗
25. Fabrication of covalently bonded nanostructured thin films of epoxy resin and polydimethylsiloxane for oil adsorption10.1007/s00289-017-1988-0 ↗
26. Covalent layer‐by‐layer assembly and solvent memory of multilayer films from homobifunctional poly(dimethylsiloxane)10.1002/ange.200907161 ↗
27. Nanofabrication of block copolymers of PDMS/polyamide having trichlorogermyl pendant using LbL technique
28. The effect of Co addition on the positive active material in Ni–Cd pocket-plate batteries10.1016/S0378-7753(00)00403-1 ↗
29. Chapter II-2-B - batteries in PV systems
30. Optimization of nitric acid properties for chemical recycling of cadmium from spent Ni-Cd batteries
31. Yildiz · 2017
32. Ball · 2014
33. The solubility of cadmium in mixtures of cadmium chloride with other chlorides10.1021/ja01125a017 ↗
34. Solubility of d -element salts in organic and aqueous–organic solvents: II. Effect of halocomplex formation on solubility of cobalt bromide and chloride and nickel chloride10.1134/S1070363216040022 ↗
35. Nickel nanoparticles prepared by hydrazine hydrate reduction and their application in supercapacitor10.1016/j.powtec.2012.02.048 ↗
36. Synthesis and crystal structures of Cd(OH)Cl and Cu(OH)Cl and relationship to brucite type10.1006/jssc.2000.8659 ↗
37. Ni nanoparticles prepared by simple chemical method for the synthesis of Ni/NiO-multi-layered graphene by chemical vapor deposition10.1016/j.solidstatesciences.2016.12.007 ↗
38. Preparation of nanocrystalline CdS thin film by successive ionic layer adsorption and reaction (SILAR) method
39. Low pe+pH induces inhibition of cadmium sulfide precipitation by methanogenesis in paddy soil10.1016/j.jhazmat.2022.129297 ↗
40. Liesegang ring type structures and bifurcation in solid–vapor and liquid phase reactions between cobalt nitrate and ammonium hydroxide10.1006/jcis.1997.4922 ↗
41. X-ray diffraction studies on the thermal decomposition mechanism of nickel hydroxide10.1021/jp906578u ↗
42. Precipitation stoichiometry
43. End-of-life nickel–cadmium accumulators: characterization of electrode materials and industrial Black Mass10.1080/09593330.2014.962621 ↗
44. Cadmium recovery from spent Ni-Cd batteries: a brief review10.3390/met11111714 ↗
45. Reactions of metal oxides with carbon10.3103/S0967091214050118 ↗
46. Large-scale synthesis of highly pure Cd metal hexagonal nanosheets10.1016/j.matlet.2011.03.073 ↗
47. Temperature-dependent self-assembly of NiO/Co3O4 composites for supercapacitor electrodes with good cycling performance: from nanoparticles to nanorod arrays10.1039/C4RA14153A ↗
48. Synthesis of Co3O4/NiO nanospherical composites as electrode material for high-performance supercapacitors10.1140/epjp/s13360-023-04001-5 ↗
49. NiO nanoparticles: synthesis and characterization
50. Synthesis of NiO nanoparticles through sol-gel method10.1016/j.proche.2016.03.062 ↗
51. Layer-by-layer fabrication of nacre inspired epoxy/MMT multilayered composites10.1002/app.46079 ↗
52. Polymer design for 3D printing elastomers: recent advances in structure, properties, and printing10.1016/j.progpolymsci.2019.101144 ↗
53. Amine treatment of polyvinyl chloride/wood flour composites10.1002/app.35482 ↗
54. Contribution of cadmium to electrical conductivity of its solution in molten cadmium chloride, bromide and iodide10.1016/0013-4686(72)80023-9 ↗
55. Electrical, mechanical and thermal properties of polyvinyl chloride composites filled with aluminum powder10.1016/j.matdes.2010.06.035 ↗
56. Improved electrical conductivity of PDMS/SCF composite sheets with bolting cloth prepared by a spatial confining forced network assembly method10.1039/C7RA02061A ↗
57. Multifunctional ZnO-Co3O4 @ polymer hybrid nanocoatings with controlled adsorption, photocatalytic and anti-microbial functions for polluted water systems
58. Wettability of metals by water10.3390/met12081274 ↗
59. Oxygen plasma treatment time induced hydrophilicity of polydimethylsiloxane (PDMS) thin films for liquid lenses application
60. Grafting silicone at room temperature-a transparent, scratch-resistant nonstick molecular coating10.1021/acs.langmuir.9b03223 ↗
61. Sodium hydroxide treatment of PDMS based microfluidic devices10.1039/c004769d ↗
62. Polyvinyl chloride/polycarbonate blend ultrafiltration membranes for water treatment10.1016/j.memsci.2017.04.011 ↗
63. Gales · 2002 · 197 · 211
64. Solvent compatibility of poly(dimethylsiloxane)-based microfluidic devices10.1021/ac0346712 ↗