journal article·2025-04

Fabrication and properties of fast response NTC chip thermistors: Based on Mn-Co-Fe-Mg-M-O (M=Zn, Cr) high entropy ceramics

Shiyu Cao, Chenyu Shi, Fanlin Kong, Yi Liu, Yanwei Fan, Yuling Tuo, Junhua Wang, Jincheng Yao, Aimin Chang

Publisher page

Abstract

In this study, fast-response Negative Temperature Coefficient (NTC) chip thermistors are fabricated using Mn-Co-Fe-Mg-Zn-O and Mn-Co-Fe-Mg-Cr-O high-entropy ceramics (HECs). These two HECs are synthesized using a solid-state reaction method. Both HECs are composed of rock-salt and spinel phases. The HECs feature a dense microstructure and the major elements are found to conform to the equimolar ratio. Because of the presence of Zn 2⁺ and Cr³⁺ ions, the electrical properties and lattice structures of the two HECs are distinct. In the Zn-containing HEC, the concentration of ion pairs participating in the conductivity is higher and the grain and grain boundary resistances are almost equal. In contrast, the concentration of ion pairs in the Cr-containing HEC is lower, with grain boundary resistance dominating. The room temperature resistivities of the two HECs are 167,163 Ω · c m and 264,471 Ω · c m , with material constants ( B 25 / 50 ) of 4357 K and 4286 K , respectively. After aging at 125 °C for 1000 h, the resistance drift rates of the two HECs are 0.49 % (Mn-Co-Fe-Mg-Zn-O) and 0.59 % (Mn-Co-Fe-Mg-Cr-O). A mathematical model has been developed to describe the dynamic process of the NTC thermistor. The model shows that an increase in the material constant B value of the NTC material results in a reduction in the thermal time constant of the fabricated NTC thermistor. The high B values of HECs suggest that NTC thermistors made from these materials are suitable for fast-response applications. The thermal time constants of two NTC chip thermistors in air are 1.891 s and 2.707 s, respectively. It is anticipated that the HEC materials can be employed in the fabrication of fast-response NTC thermistors.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electrical and Thermal Properties of Materials · High Entropy Alloys Studies · Ferroelectric and Piezoelectric Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (44)

Show source-provided references
1. Advances in sea surface layer temperature measurements with fast responding thermistor arrays on drifting buoys10.18520/cs/v115/i2/325-330 ↗
2. Estimation of seawater hydrophysical characteristics from thermistor strings and CTD data in the sea of Japan shelf zone10.3390/jmse11061204 ↗
3. Fast response thin-film thermistor for measurements in ocean waters10.1063/1.1851494 ↗
4. Fabrication and electrical properties of the fast response Mn1.2Co1.5Ni0.3O4 miniature NTC chip thermistors10.1016/j.ceramint.2018.09.177 ↗
5. Fast response thin-film thermistor for measurements in ocean waters10.1063/1.1851494 ↗
6. Time constant as the main component to optimize the resistance temperature sensors' calibration process10.3390/s24020487 ↗
7. Origin and reactivity of hot-spots in end-gas autoignition with effects of negative temperature coefficients: relevance to pressure wave developments10.1016/j.combustflame.2017.06.016 ↗
8. In-flight wireless charging: a promising application-oriented charging technique for drones10.1109/MIE.2023.3246236 ↗
9. Fast response and high stability Mn-Co-Ni-Al-O NTC microbeads thermistors10.1111/jace.17818 ↗
10. Structural, optical, relaxor and transport properties of a nanocrystalline double perovskite: Ba2(FeMo)O610.1142/S2010324723500303 ↗
11. Investigation of structure, dielectric, thermistor, and optical properties study of an eco-friendly double perovskite for photovoltaic and optoelectronic applications: CaLiFeWO6, Curr
12. Aging of NTC ceramics in the system Mn-Ni-Fe-O10.1023/B:JECR.0000027947.28060.33 ↗
13. Entropy-stabilized oxides10.1038/ncomms9485 ↗
14. Thermophysical and mechanical properties of dual-phase medium- and high-entropy rare-earth zirconate ceramics10.1016/j.ceramint.2023.09.129 ↗
15. High-entropy ferroelectric materials10.1038/s41578-023-00544-2 ↗
16. The effect of manganese substitution to gallium on the physical properties of MgGa2-xMnxO4 spinel type ceramic thermistors10.1016/j.jeurceramsoc.2007.02.129 ↗
17. Zn0.5Co0.5Mn0.5Fe0.5Al0.5Mg0.5O4 high-entropy oxide with high capacity and ultra-long life for Li-ion battery anodes10.26599/JAC.2023.9220666 ↗
18. (Mg,Mn,Fe,Co,Ni)O: a rocksalt high-entropy oxide containing divalent Mn and Fe10.1126/sciadv.adi8809 ↗
19. High-entropy spinel ferrites MFe2O4 (M = Mg, Mn, Fe, Co, Ni, Cu, Zn) with tunable electromagnetic properties and strong microwave absorption10.1007/s40145-022-0569-3 ↗
20. Enhanced time response and temperature sensing behavior of thermistor using Zn-doped CaTiO3 nanoparticles10.1007/s40145-018-0261-9 ↗
21. Effects of Zn-doped on the microstructure and electrical properties of Mn1.5-xCo1.2Cu0.3ZnxO4(0≤x≤0.5) NTC ceramics10.1007/s10854-017-8471-4 ↗
22. Preparation and electrical properties of sintered bodies composed of CrXMn1.5Co(1.0-X)Ni0.5O4(0≦X≦0.42) with a cubic spinel structure10.1007/s10832-015-9999-4 ↗
23. Spinels: controlled preparation, oxygen reduction/evolution reaction application, and beyond10.1021/acs.chemrev.7b00051 ↗
24. Valence engineering via selective atomic substitution on tetrahedral sites in spinel oxide for highly enhanced oxygen evolution catalysis10.1021/jacs.8b13701 ↗
25. Site of preference energy + selective uptake of transition-metal ions from magma10.1126/science.144.3621.1001 ↗
26. Sintering and electrical properties of Mn-Co-Fe-Zn-Ni-O high-entropy ceramics for NTC thermistors10.1016/j.ceramint.2023.12.095 ↗
27. Co-doped stannates/reduced graphene composites: effect of cobalt substitution on the electrochemical sensing of hydrogen peroxide10.1016/j.snb.2017.04.154 ↗
28. Advanced high entropy perovskite oxide electrocatalyst for oxygen evolution reaction
29. Fe doped Ni-Mn-Co-O ceramics with varying Fe content as negative temperature coefficient sensors10.1016/j.ceramint.2017.05.108 ↗
30. Novel (1-x)MgCu2Nb2O8 − xTiO2 composite ceramics with high Q×f and near-zero τf10.1088/1402-4896/acecbb ↗
31. Boosted oxygen evolution reactivity by igniting double exchange interaction in spinel oxides10.1021/jacs.9b10882 ↗
32. Formation of Al-doped ZnO films by de magnetron reactive sputtering10.1016/S0167-577X(00)00302-5 ↗
33. The characterization of electrical properties of Pd-doped LaCrO3 perovskite structure10.1007/s10854-018-9789-2 ↗
34. Resolving surface chemical states in XPS analysis of first row transition metals, oxides and hydroxides: Cr, Mn, Fe, Co and Ni10.1016/j.apsusc.2010.10.051 ↗
35. Lead-free complex double perovskite SrLiFeWO6: structural, microstructure, electrical and optical study10.1016/j.physb.2023.415246 ↗
36. Structural, dielectric, electric, transport, and optical properties of a double perovskite: BaKFeMoO610.1016/j.cjph.2022.09.025 ↗
37. Electrical and optical properties of a lead-free complex double perovskite BaNaFeMoO6: photovoltaic and thermistor applications
38. Enhanced structural and aging stability in cation-disordered spinel-type entropy-stabilized oxides for thermistors10.1021/acsaelm.1c01222 ↗
39. Influence of particle size on the structural and electrical properties of Mn1.1Co1.5Fe0.4O4 ceramics10.1016/j.scriptamat.2020.07.012 ↗
40. CaMn0.05Zr0.95O3-NiMn2O4 composite ceramics with tunable electrical properties for high temperature NTC thermistors10.1016/j.ceramint.2022.07.289 ↗
41. Two-step sintering of submicro-grain Ni0.54Mn1.26Fe1.2O4 NTC ceramics with an excellent electrical performance10.1007/s10854-019-02388-5 ↗
42. Improved energy storage properties accompanied by enhanced interface polarization in annealed microwave-sintered BST10.1111/jace.13741 ↗
43. Impedance analysis of MnCoCuONTC ceramic10.1016/j.materresbull.2005.04.001 ↗
44. Determination of thermal time constant of a Pt100 temperature sensor in still oil using the time derivative method10.1002/ceat.202200119 ↗