Work function tuning of thermally evaporated V2Ox films using UV-Ozone treatment and its influence on V2Ox/c-Si(n) solar cells
Source abstract
Abstract
The work function of transition metal oxide (TMO) strongly influences the device performance in TMO/c-Si heterojunction solar cells. O/TM stoichiometric ratio, oxygen vacancy, and exposure to external environments, all affect the TMO`s work function. The effective use of UV-Ozone (UVO) treatment to enhance the work function of thermally evaporated Vanadium oxide (V 2O x) films is demonstrated in this paper. Thin V 2O x films are exposed to UVO for different time durations (5, 10, 15, and 20 min), and the effect on different properties are examined. The reduction of oxygen void sites and conductivity of V 2O x films after UVO treatment resulted in a 0.41 eV work function gain in the 20-min UVO-treated film (5.10 eV after UVO treatment and 4.69 eV in as-deposited film). These results are supported by XPS investigations, which demonstrated that 20-min UVO treated films had 84.96 % of V atoms having V 5+ oxidation state compared to as-deposited films, which only had 76.75 % of V atoms having this state. Also, increment in V 5+ oxidation state has reduced the oxygen vacancies from 46.46 % (as-deposited) to 24.42 % (20-min UVO), which helps in enhancing the work function of V 2O x films. Our findings imply that UVO treatment is a useful technique for enhancing TMO`s work function which is essential for high efficiency solar cells. Simulation studies are done to assess the impact of improvement in work function on the performance of V 2O x/c-Si(n) heterojunction solar cells.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Silicon and Solar Cell Technologies · Thin-Film Transistor Technologies · Transition Metal Oxide Nanomaterials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (41)
Show source-provided references
1. Transition metal oxides as hole-selective contacts in silicon heterojunctions solar cells10.1016/j.solmat.2015.08.028 ↗
2. Origin of passivation in hole-selective transition metal oxides for crystalline silicon heterojunction solar cells10.1557/jmr.2016.453 ↗
3. Silicon heterojunction solar cells with up to 26.81% efficiency achieved by electrically optimized nanocrystalline-silicon hole contact layers10.1038/s41560-023-01255-2 ↗
4. 23.5%-efficient silicon heterojunction silicon solar cell using molybdenum oxide as hole-selective contact10.1016/j.nanoen.2020.104495 ↗
5. Silicon heterojunction solar cell with passivated hole selective MoOx contact10.1063/1.4868880 ↗
6. Organic-silicon heterojunction solar cells on n-type silicon wafers: the BackPEDOT concept10.1016/j.solmat.2014.05.022 ↗
7. Titanium dioxide/silicon hole-blocking selective contact to enable double-heterojunction crystalline silicon-based solar cell10.1063/1.4916540 ↗
8. Hole selective MoOx contact for silicon solar cells10.1021/nl404389u ↗
9. Low-temperature atomic layer deposition of MoOx for silicon heterojunction solar cells10.1002/pssr.201510117 ↗
10. Chemical bath deposition of p-type transparent, highly conducting (CuS)x:(ZnS)1–x nanocomposite thin films and fabrication of Si heterojunction solar cells10.1021/acs.nanolett.5b05124 ↗
11. Superior performance of V2O5 as hole selective contact over other transition metal oxides in silicon heterojunction solar cells10.1016/j.solmat.2017.04.042 ↗
12. Atomic layer deposition of vanadium oxide as hole-selective contact for crystalline silicon solar cells10.1002/aelm.202000467 ↗
13. Optimization of a high work function solution processed vanadium oxide hole-extracting layer for small molecule and polymer organic photovoltaic cells10.1021/jp3075767 ↗
14. Thermoelectric properties of V2O5 thin films deposited by thermal evaporation10.1016/j.apsusc.2013.06.016 ↗
15. Hole selective materials and device structures of heterojunction solar cells: recent assessment and future trends10.1063/1.5121327 ↗
16. Dual-functional quantum-dots light emitting diodes based on solution processable vanadium oxide hole injection layer10.1038/s41598-021-81480-5 ↗
17. Harnessing oxygen vacancy in V2O5 as high performing aqueous zinc-ion battery cathode10.1016/j.jallcom.2021.159403 ↗
18. Hole-collection mechanism in passivating metal-oxide contacts on Si solar cells: insights from numerical simulations10.1109/JPHOTOV.2018.2796131 ↗
19. Fabrication, microstructure and electrical conductivity of V2O5 ceramics10.1016/S0025-5408(96)00015-3 ↗
20. The effects of oxygen vacancies on the electronic properties of V2O5−x10.1007/s10854-007-9506-z ↗
21. Requirements for efficient hole extraction in transition metal oxide-based silicon heterojunction solar cells10.1063/1.5045250 ↗
22. Oxygen plasma treatment of thermally evaporated MoO3-x films: an approach to tune the work function10.1021/acsaelm.3c00343 ↗
23. Effect of UV–ozone treatment on electrical properties of PEDOT:PSS film10.1016/j.orgel.2010.11.009 ↗
24. UV/Ozone-Assisted rapid formation of high-quality tribological self-assembled monolayer10.3390/coatings9110762 ↗
25. Kohli · 2019 · 355
26. Growth dynamics and its correlation with plasmonic properties of silver nanoparticles grown by solid state dewetting10.1016/j.materresbull.2023.112380 ↗
27. Matthew Pelliccione · 2008 · vol. 108
28. Synthesis and characterization of V2O5-Ga2O3 photocatalysts and their application on the photocatalytic reduction of CO(2)10.1007/s11356-023-26155-6 ↗
29. Inverted organic solar cells with sol–gel processed high work‐function vanadium oxide hole‐extraction layers10.1002/adfm.201101402 ↗
30. Effect of ultraviolet-ozone treatment on the properties and antibacterial activity of zinc oxide sol-gel film10.3390/ma12152422 ↗
31. V2O5/rGO arrays as potential anode materials for high performance sodium ion batteries10.1007/s10008-020-04844-3 ↗
32. Influence of post-UV/ozone treatment of ultrasonic-sprayed zirconium oxide dielectric films for a low-temperature oxide thin film transistor10.3390/ma13010006 ↗
33. Effects of UV-ozone treatment on sensing behaviours of EGFETs with Al(2)O(3) sensing film10.3390/ma10121432 ↗
34. Solution-processed vanadium oxide as an efficient hole injection layer for quantum-dot light-emitting diodes10.1039/C6TC04050K ↗
35. A MIL-47(V) derived hierarchical lasagna-structured V2O3@C hollow microcuboid as an efficient sulfur host for high-performance lithium–sulfur batteries10.1039/C9NR10491G ↗
36. Mixed-valence vanadium oxides studied by XPS10.1016/S0039-6028(00)00111-4 ↗
37. Enhanced lithium storage performance of V2O5 with oxygen vacancy10.1039/C8RA07326K ↗
38. XPS and optical properties of sol-gel processed vanadium pentoxide films10.3952/lithjphys.48405 ↗
39. XPS study of Li ion intercalation in V2O5 thin films prepared by thermal oxidation of vanadium metal10.1016/j.electacta.2006.12.050 ↗
40. Photoelectron spectroscopy study of oxygen vacancy on vanadium oxides surface10.1016/j.apsusc.2004.05.112 ↗
41. Numerical simulation of silicon heterojunction solar cells featuring metal oxides as carrier-selective contacts10.1109/JPHOTOV.2018.2793762 ↗