Effect of 3-amino-1,2,4-triazole and triethylenetetramine on silicon backside thinning chemical mechanical polishing
Source abstract
Abstract
With the increasing integration of integrated circuits and the process approaching physical limits, 3D integration technology has become the best means to continue improving performance of integrated circuits. Due to the need to package more chips in same volume, the thickness of chips reaches tens of micrometers, highlighting the importance of backside thinning processes. In the chemical mechanical polishing (CMP) process used for backside thinning of silicon wafers, it is necessary to achieve a very high material removal rate while also ensuring good surface quality for the next step of processing. Currently, there are few reports on the research of silicon thinning CMP, and conventional silicon wafer CMP slurry cannot meet the speed requirements for silicon backside thinning CMP. This paper innovatively used 3-amino-1,2,4-triazole (ATA) and triethylenetetramine (TETA) as the main additives to achieve a high level of polishing effect based on requirements for removal rate and surface quality of silicon wafer backside thinning. It was found that ATA can improve surface flatness of wafer at an appropriate concentration, while TETA can significantly increase removal rate of silicon. Contact angle and X-ray photoelectron spectrometer (XPS) testing was used to study the mechanism of additives, showed that ATA can adsorb to the wafer surface through physical action, protecting the concave areas but slightly reducing removal rate. TETA can greatly increase removal rate by enhancing wetting properties of the slurry and polarizing silicon atoms on the wafer surface. This research provides a feasible method for silicon backside thinning CMP.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Surface Polishing Techniques · Integrated Circuits and Semiconductor Failure Analysis · Advanced Machining and Optimization Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (30)
Show source-provided references
1. Research on ultra-thin wafer thinning process
2. Application and development of large-size silicon wafer back grinding technology
3. Research on chip back grinding and thinning technology
4. Grinding of silicon wafers: a review from historical Perspectives10.1016/j.ijmachtools.2008.05.009 ↗
5. Edge chipping of silicon wafers in diamond grinding10.1016/j.ijmachtools.2012.08.002 ↗
6. Edge chipping of silicon wafers in rotating grinding[C]
7. Analytical modeling of grinding-induced subsurface damage in monocrystalline silicon10.1016/j.matdes.2017.05.068 ↗
8. High efficiency chemical mechanical polishing for silicon wafers using a developed slurry
9. Role of crystal orientation on chemical mechanical polishing of single crystal copper10.1016/j.apsusc.2016.06.030 ↗
10. Chip stacking structure and its forming method, chip packaging structure, electronic device
11. Advanced wafer thinning technology and feasibility test for 3D integration10.1016/j.mee.2012.10.025 ↗
12. Pei · 2018
13. Peng Shiyue · 2023
14. Sun · 2023
15. Park
16. A
17. Role of amines and amino acids in enhancing the removal rates of undoped and P-doped polysilicon films during chemical mechanical polishing10.1016/j.colsurfa.2010.05.026 ↗
18. Chemical effect on the material removal rate in the CMP of silicon wafers10.1016/j.wear.2010.11.006 ↗
19. A combined gas cluster ion beam(GCIB) and chemical-mechanical polish(CMP) planarization scheme for tungsten replacement metal gate(W-RMG)10.1149/2.0161607jss ↗
20. Site flatness measurement system with an accuracy of sub-nanometer order for silicon wafer
21. A comparative study between total thickness variance and site flatness of polished silicon wafer10.1143/JJAP.40.5300 ↗
22. Influence of chemical corrosion on local flatness of semiconductor silicon wafer after polishing
23. Polymer nanoparticles applied in the CMP (chemical mechanical polishing) process of chip wafers for defect improvement and polishing removal rate response10.3390/polym15153198 ↗
24. Effect of silicon dioxide hardness on scratches in interlevel dielectric Chemical–Mechanical Polishing10.1080/10402004.2013.861048 ↗
25. Control of polishing fog defects in CMP of wafers
26. Effect of soft agglomerates on CMP slurry performance10.1006/jcis.2002.8352 ↗
27. Chemomechanical polishing of silicon: surface termination and mechanism of removal10.1063/1.111365 ↗
28. Silicon wafer CMP slurry using a hydrolysis reaction accelerator with an amine functional group remarkably enhances polishing rate10.3390/nano12213893 ↗
29. Mechanism of ethylenediamine in chemical mechanical polishing of silicon
30. Isoelectric points and points of zero charge of metal (hydr) oxides: 50 years after Parks' review10.1016/j.cis.2016.10.005 ↗