journal article·2024-06

Improvement of warpage and leakage for 3D NAND flash memory

Kun Zhang, Wenxi Zhou, Tuo Li, Sicong Wang, Xiaomin Cheng, Zhiliang Xia, Xiangshui Miao

Publisher page

Abstract

GLS (Gate line split) filling is a very important process in 3D NAND flash memory (3D NAND) fabrication. Filling materials in the GLS should have threefold properties, such as warpage tunability, leakage-free and low resistance. In this paper, the effects of different GLS filling materials (SiO 2, W, amorphous silicon: A-Si) on F-attack, warpage and resistance were studied. GLS filled with A-Si shows best performance on warpage and F-attack. For 3D NAND, the number of stacked layers is predicted as a function of the wafer warpage, and the wafer warpage difference between GLS filled with A-Si and W was compared. With the same number of stacking layers, the wafer warpage post GLS filled with A-Si is smaller than that filled with W. Meanwhile, A-Si is produced by the decomposition of SiH 4 by low pressure chemical vapor deposition (LPCVD) process, F-related by-product in the GLS filling material and consequent ACS (array common source) to WL (Word line) leakage by F-attack are avoided. A-Si is the best choice for GLS filling. This work provides an efficient method to solve the warpage and leakage problem in 3D NAND flash memory fabrication.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Semiconductor materials and devices · Advanced Surface Polishing Techniques · Advanced Data Storage Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (16)

Show source-provided references
1. Trends and future challenges of 3D NAND flash memory
2. How to improve overlay of highly deformed 3D NAND wafers
3. A methodology for mechanical stress and wafer warpage minimization during 3D NAND fabrication10.1016/j.mee.2021.111660 ↗
4. Technology scaling challenges and opportunities of memory devices
5. Reviewing the evolution of the NAND flash technology10.1109/JPROC.2017.2665781 ↗
6. Multi-scale modeling approach to assess and mitigate wafer warpage in 3-D NAND fabrication
7. Influence of rapid thermal annealing on the wafer warpage in 3D NAND flash memory10.1088/1361-6641/aafccd ↗
8. Array architectures for 3-D NAND flash memories10.1109/JPROC.2017.2697000 ↗
9. Process improvements for 7 th generation 1Tb quad-level cell 3D NAND flash memory in mass production
10. Influence of substrate properties and annealing temperature on the stress state of magnetron sputtered tungsten thin films10.1116/1.2348643 ↗
11. Rapid thermal annealing for reducing stress in tungsten x‐ray mask absorber10.1116/1.586673 ↗
12. Influence of rapid thermal annealing on the wafer warpage in 3D NAND flash memory10.1088/1361-6641/aafccd ↗
13. A new era of crystallization: advances in polysilicon crystallization and crystal engineering10.1016/S0169-4332(02)01343-0 ↗
14. Large grain polycrystalline silicon by low‐temperature annealing of low‐pressure chemical vapor deposited amorphous silicon films10.1063/1.341065 ↗
15. Low temperature deposition of doped polycrystalline silicon at atmospheric pressure and its application to a strain gauge
16. The tension of metallic films deposited by electrolysis