journal article·2022-11

LSGMCF dense diffusion barrier preparation and electrical characteristics for limiting current oxygen sensor

Wendong Tan, Jinlian Li, Yakai Wang, Fuyao Wang, Xiaofang Zhang, Jiegang You, Xudong Luo, Xiangnan Wang

Publisher page

Abstract

La 0.8Sr 0.2(Ga 0.8Mg 0.2) 1-x(Cr 0.4Fe 0.6) xO 3-δ(LSGMCF, x = 0.1, 0.3, 0.5, 0.7 and 0.9) and La 0.8Sr 0.2Ga 0.8Mg 0.2(LSGM) were synthesized by solid-state reaction with La 2O 3, SrCO 3, Ga 2O 3 , MgO, Cr 2O 3 and Fe 2O 3 as raw materials. By characterizing the phase analysis and micro-structure of LSGMCF, it was found that Cr and Fe dissolved in the main crystalline phase LSGM in a wide range. The effects of Cr and Fe concentrations on the electronic and total conductivity of LSGMCF were analyzed by Hebb-Wagner and Linear Sweep Voltammetry methods. The results show that when x = 0.9, it has better electronic conductivity and the highest total conductivity. LSGMCF( x = 0.9) and LSGM were prepared into limiting current oxygen sensor by co-pressing and co-sintering technique, and its sensing characteristics were studied. The oxygen sensor exhibits a limiting current in the range of 0–7% oxygen concentration at 730–790 °C. The limiting current is directly proportional to the oxygen concentration, indicating that it shows good sensing characteristics at different temperatures. In addition, its sensing performance has excellent stability between 0 -42h.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Gas Sensing Nanomaterials and Sensors · Electronic and Structural Properties of Oxides · Advancements in Solid Oxide Fuel Cells

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (47)

Show source-provided references
1. A new type of amperomtric oxygen sensor based on a mixed-conducting membrane10.1016/S0925-4005(00)00629-8 ↗
2. The amperometric oxygen sensor based on La_(0.9)Sr_(0.1)Ga_(0.8)Mg_(0.2)O_(2.85)
3. Dense diffusion barrier current oxygen sensors10.1016/S0925-4005(98)00169-5 ↗
4. Solid-state gas sensors for high temperature applications - a review10.1039/C3TA15008A ↗
5. Template-directed synthesis of mesoporous TiO2 materials for energy conversion and storage10.1007/s42247-020-00091-4 ↗
6. Recent advancements of two-dimensional transition metal dichalcogenides and their applications in electrocatalysis and energy storage10.1007/s42247-021-00241-2 ↗
7. Affinity biosensors developed with quantum dots in microfluidic systems10.1007/s42247-021-00195-5 ↗
8. Electrochemical sensors for energy and transportation10.1149/2.F05042IF ↗
9. Perovskite oxides for semiconductor-based gas sensors10.1016/j.snb.2006.10.051 ↗
10. Practical aspects in design of one-electrode semiconductor gas sensors: status report10.1016/j.snb.2006.04.092 ↗
11. Planar type of limiting current oxygen sensor10.1016/0925-4005(93)85318-5 ↗
12. Dion-Jacobson-type oxide-ion conductor CsLa2Ti2NbO10-δ without phase transitions10.1039/D0TA06135B ↗
13. Review on the electromagnetic interference shielding properties of carbon based materials and their novel composites: recent progress, challenges and prospects10.1016/j.carbon.2021.01.124 ↗
14. Limiting current type yttria-stabilized zirconia thin-film oxygen sensor with spiral Ta2O5 gas diffusion layer10.1016/j.snb.2020.128932 ↗
15. Hierarchically porous Co/C nanocomposites for ultralight high-performance micro-wave absorption10.1007/s42114-020-00202-z ↗
16. A new application of CexZr1-xO2 as dense diffusion barrier in limiting current oxygen sensor10.1016/j.snb.2019.01.086 ↗
17. Crystal structure, microstructure, thermal expansion and electrical conductivity of CeO2–ZrO2 solid solution10.1080/17436753.2017.1358503 ↗
18. Principles of solid state oxygen sensors for lean combustion gas10.1016/S0013-4686(01)00761-7 ↗
19. Conductivity and mixed conductivity of a novel dense diffusion barrier and sensing properties of limiting current oxygen sensors
20. A novel limiting current oxygen sensor prepared by slurry spin coating10.1016/j.snb.2018.05.076 ↗
21. Study of YSZ amperometric oxygen sensor with a dense barrier layer
22. A high performance limiting current oxygen sensor with Ce0.8Sm0.2O1.9 electrolyte and La0.8Sr0.2Co0.8Fe0.2O3 diffusion barrier10.1016/j.electacta.2013.07.005 ↗
23. Limiting-current oxygen sensor with LaNi0.6Fe0.4O3-δ dense diffusion barrier and Ce0.8Gd0.15Ca0.05O2-δ electrolyte10.1016/j.ceramint.2019.03.102 ↗
24. Evaluation of Ni and Ti-doped Y2O3 Stabilized ZrO2 Cermet as an anode in high-temperature solid oxide fuel cells
25. Ionic and electronic conductivity of 3mol% Fe2O3-substituted cubic yttria-stabilized ZrO2(YSZ) and scandia-stabilized ZrO2(ScSZ)10.1016/j.ssi.2013.11.003 ↗
26. A limiting current oxygen sensor with (CuO)0.1(8YSZ)0.9 dense diffusion barrier10.1016/j.physb.2022.413701 ↗
27. Conductivity behavior of Fe, Ti singly doubly doped CaO-ZrO210.1016/j.jallcom.2019.05.228 ↗
28. Preparation and electrical behavior study of the ceramic interconnect La0.7Ca0.3CrO3-δ with CeO2-based electrolyte Ce0.8Sm0.2O1.910.1016/j.materresbull.2008.03.007 ↗
29. Influence of Thickness on oxide ionic conductivity in Sm3+ and Nd3+ Co-doped CeO2 electrolyte10.4028/www.scientific.net/KEM.434-435.710 ↗
30. Electrical properties and defect structure of niobia-doped ceria10.1016/j.ssi.2004.01.066 ↗
31. Effect of Y2O3 addition on the conductivity and elastic modulus of (CeO2)1-x(YO1.5)x10.1016/j.ssi.2009.06.003 ↗
32. Doped LaGaO3 perovskite type oxide as a new oxide ionic conductor10.1021/ja00088a016 ↗
33. Chemical stability of the La0.9Sr0.1Ga0.8Mg0.2O2.85 electrolyte in a reducing atmosphere10.1016/S0167-2738(99)00039-9 ↗
34. LSGM-based solid oxide fuel cell with 1.4 W/cm2 power density and 30 day long-term stability10.1149/1.1943587 ↗
35. Mixed electronic-oxide ionic conductivity and oxygen permeating property of Fe-, Co or Ni-doped LaGaO3 perovskite oxide10.1016/S0167-2738(00)00424-0 ↗
36. A limiting current oxygen sensor based on LSGM as a solid electrolyte and LSGMN (N = Fe, Co) as a dense diffusion barrier10.1007/s11665-016-2171-8 ↗
37. Study of transition metal oxide doped LaGaO3 as electrode materials for LSGM-based solid oxide fuel cells10.1007/s100080050124 ↗
38. Properties of limiting current oxygen sensor with La0.8Sr0.2Ga0.8Mg0.2O3-δ solid electrolyte and La0.8Sr0.2(Ga0.8Mg0.2)1−xCrxO3-δ dense diffusion barrier10.1016/j.ssi.2017.04.002 ↗
39. Limiting current oxygen sensor based on La0.8Sr0.2Mg0.2O3-δ as both dense diffusion barrier and solid electrolyte10.1016/j.ceramint.2017.02.040 ↗
40. Transition metal doped lanthanum gallates10.1016/S0167-2738(98)00464-0 ↗
41. Preparation and electrical property of CaZr0.7M0.3O3 (M=Fe, Cr and Co) dense diffusion barrier for application in limiting current oxygen sensor10.1016/j.snb.2018.03.097 ↗
42. The effect of Fe doping on the electrical conductivities of CaZrO3 and its sensing performance in limiting current oxygen sensor10.1016/j.jallcom.2018.07.281 ↗
43. A limiting current oxygen sensor based on FeO1.5 doped LDC as dense diffusion barrier10.1016/j.jallcom.2018.02.061 ↗
44. An oxygen permeable membrane La0.8Sr0.2(Ga0.8Mg0.2)1−xCrxO3−δ for a reduced atmosphere10.1016/j.ssi.2009.05.016 ↗
45. Effect of film thickness on the electrical and ethanol sensing characteristics of LaFeO3 nanoparticle-based thick film sensors10.1016/j.ceramint.2018.01.163 ↗
46. A dense diffusion barrier limiting current oxygen sensor for detecting full concentration range
47. A limiting current oxygen sensor prepared by a co-pressing and co-sintering technique