journal article·2025-03

Effects of process parameters and pattern densities on the performance of two-step chemical mechanical polishing for cobalt interconnects

Lifei Zhang, Xinchun Lu

Publisher page

Abstract

Cobalt (Co) is regarded as an ideal material for interconnects in small-scale integrated circuits because of its excellent properties. This study explores the two-step chemical mechanical polishing (CMP) process applied to Co interconnects. Significant performance differences between Co blanket and patterned wafers, particularly in terms of removal rate and galvanic corrosion were first proposed, where Co patterned wafers under varying polishing times exhibit higher polishing efficiencies with barely galvanic corrosion at the interface of heterogeneous materials. Additionally, the study demonstrates that variations in pattern line width and density significantly affect wafer topography across different CMP parameters. Patterns with smaller line widths achieve better polishing results in less time, whereas larger pattern arrays demand longer times to address dishing defects.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Surface Polishing Techniques · Copper Interconnects and Reliability · Semiconductor materials and devices

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (28)

Show source-provided references
1. Controlled cobalt recess for advanced interconnect metallization10.1016/j.mee.2019.111131 ↗
2. Static and dynamic friction and wear of cobalt-based coatings at elevated temperatures10.1016/j.triboint.2024.110126 ↗
3. Investigation of novel suppressor Nitrotetrazolium Blue chloride on cobalt superconformal growth10.1016/j.jmapro.2023.05.059 ↗
4. Sub-100 nm2 cobalt interconnects10.1109/LED.2018.2821923 ↗
5. The role of dipotassium ethylenediaminetetraacetic acid and potassium oleate on chemical mechanical planarization relevant to heterogeneous materials of cobalt interconnects10.1016/j.mssp.2023.107410 ↗
6. Atomic surface induced by novel green chemical mechanical polishing for aspheric thin-walled crucibles with large diameters10.1016/j.jmapro.2024.03.014 ↗
7. The role of ammonium citrate and dodecyl pyridinium chloride on chemical mechanical polishing relevant to SiO2 dielectric layer10.1016/j.jmapro.2023.10.054 ↗
8. Interfacial characterization of low-temperature Cu-to-Cu direct bonding with chemical mechanical planarized nanotwinned Cu films10.3390/ma15030937 ↗
9. Synergetic effect of H2O2 and glycine on cobalt CMP in weakly alkaline slurry10.1016/j.mee.2014.02.002 ↗
10. High removal rate cobalt slurry with glutathione on chemical mechanical polishing in alkaline slurry10.1149/2162-8777/abb4a2 ↗
11. Effect of diethanolamine as corrosion inhibitor for the chemical mechanical polishing of cobalt in H2O2 based slurry10.1149/2162-8777/abf49c ↗
12. Research on weakly alkaline bulk slurries relevant to chemical mechanical polishing for cobalt interconnects10.1007/s00170-023-10824-4 ↗
13. Nicotinic acid as a novel inhibitor for alkaline cobalt CMP: experiment and molecular simulation10.1016/j.colsurfa.2022.129816 ↗
14. Non-contact Post-CMP megasonic cleaning of cobalt wafers10.1016/j.mssp.2022.107278 ↗
15. Roles of phthalic acid and oleic acid on chemical mechanical polishing in alkaline slurries for cobalt interconnects
16. Galvanodynamic probing of tribologically assisted material removal under chemical control: a cobalt/copper case study for application in chemical mechanical planarization10.1016/j.triboint.2022.108185 ↗
17. Effects of aging time in hydrogen peroxide-glycine-based Cu CMP slurry10.1016/j.mssp.2021.106343 ↗
18. Characterization of slurries used for chemical‐mechanical polishing (CMP) in the semiconductor industry10.1002/ceat.200303050 ↗
19. Environment-friendly chemical mechanical polishing using NaHCO3-activated H2O2 slurry for highly efficient finishing of 4H-SiC (0001) surface10.1016/j.jmapro.2023.12.014 ↗
20. Ammonium persulfate and potassium oleate containing silica dispersions for chemical mechanical polishing for cobalt interconnect applications
21. Effect of diethylenetriamine pentaacetate pentapotassium on chemical mechanical polishing of cobalt in H2O2 based slurry10.1149/2.0291905jss ↗
22. Electrochemical corrosion behavior and theoretical simulation of cobalt in chemical mechanical polishing process10.1016/j.electacta.2023.143184 ↗
23. Experimental and computational studies on octyl hydroxamic acid as an environmentally friendly inhibitor of cobalt chemical mechanical polishing10.1021/acsami.2c02837 ↗
24. Effect of oxalic acid (complexing agent) on anodic dissolution of Cobalt in hydrogen peroxide solutions: mechanism and kinetic analysis by electrochemical impedance spectroscopy10.1007/s10008-023-05379-z ↗
25. Effect of slurry additives on Co-BTA complex stability and inhibition property during Co CMP process10.1149/2162-8777/ac8833 ↗
26. Cobalt polishing with reduced galvanic corrosion at copper/cobalt interface using hydrogen peroxide as an oxidizer in colloidal silica-based slurries10.1149/2.073206jes ↗
27. Investigation of electrochemical behavior and polishing mechanism in electrochemical mechanical polishing of cobalt10.1016/j.mssp.2023.107899 ↗
28. Mechano-oxidation during cobalt polishing10.1016/j.wear.2018.09.005 ↗