Atomic position dependent structural, electronic, mechanical and optical properties of ZnSbF3 fluoroperovskites
Source abstract
Abstract
In this study, we have investigated the structural, electronic, mechanical, and optical properties of ZnSbF 3-I and ZnSbF 3-II by altering the position of Zn and Sb through density functional theory (DFT) for the first time. The structural stability of both structures was confirmed by calculating formation enthalpy. A remarkable phenomenon has been observed from the electronic band structures analysis, whenever altering the atomic of Zn and Sb, which leads to a transition from semiconducting, ZnSbF 3-I to metallic, ZnSbF 3-II conductivity. The obtained bandgap value of ZnSbF 3-I is of the order of 0.97 eV with indirect transition and the spin-orbit coupling (SOC) effect reduced the band gap energy to 0.49 eV. Density of states (DOS) curves revealed that the Sb- 5p state is mainly responsible for this phase transition. The estimated elastic constants suggested that both phases are mechanically stable. By assessing the different elastic parameters, it can be concluded that both phases are mechanically ductile, machinable, isotropic, and soft in nature. A large value of bulk modulus for ZnSbF 3-II indicates that it is harder and cannot be compressed as easily as ZnSbF 3-I. The structures exhibit high efficiency in absorbing UV light. ZnSbF 3-II`s strong reflectivity in the infrared spectrum makes it an option to use for IR shielding. This study will guide further theoretical and experimental investigation.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Heusler alloys: electronic and magnetic properties · Thermal Expansion and Ionic Conductivity · Perovskite Materials and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (80)
Show source-provided references
1. Incipient multiferroicity in Pnma fluoroperovskite NaMnF310.1103/PhysRevB.101.180403 ↗
2. Green synthesis and property characterization of single‐crystalline perovskite fluoride nanorods10.1002/adfm.200700655 ↗
3. Two-dimensional hybrid perovskite ferroelectric induced by perfluorinated substitution10.1021/jacs.0c10686 ↗
4. Pan · 2016
5. Insight into the exemplary physical properties of Zn-based fluoroperovskite compounds XZnF3 (X = Al, Cs, Ga, in) employing accurate gga approach: a first-principles study10.3390/ma15072669 ↗
6. Electronic, optical and thermoelectric properties of the CsMF3 (M= Si or Ge) fluoro-perovskites10.1016/j.cocom.2022.e00699 ↗
7. Geometric ferroelectricity in fluoroperovskites10.1103/PhysRevB.89.104107 ↗
8. High-pressure structural study of fluoro-perovskite CsCdF3 up to 60 GPa: a combined experimental and theoretical study10.1103/PhysRevB.81.075105 ↗
9. Studies of ionic motion in perovskite fluorides10.1016/0167-2738(83)90294-1 ↗
10. A luminescence study of NaMgF3:Dy3+ and NaMgF3:Nd3+ for applications in radiation dosimetry10.1504/IJNT.2017.082442 ↗
11. Mechanical and magneto-opto-electronic investigation of transition metal based fluoro-perovskites: an ab-initio DFT study10.1016/j.ssc.2017.07.010 ↗
12. First-principles calculations to investigate ultra-wide bandgap semiconductor behavior of NaMgF3 fluoro-perovskite with external static isotropic pressure and its impact on optical properties10.1016/j.ijleo.2021.168532 ↗
13. First principle study of structural, electronic and mechanical properties of cubic Flouro-Perovskites: (ZnXF3, X = Y, Bi)
14. The electronic and optical properties of the fluoroperovskite XLiF3 (X=Ca, Sr, and Ba) compounds10.1016/j.commatsci.2013.06.016 ↗
15. First-principles simulation: ideas, illustrations and the CASTEP code10.1088/0953-8984/14/11/301 ↗
16. Elastic, optoelectronic and photocatalytic properties of semiconducting CsNbO3: first principles insights10.1038/s41598-023-36875-x ↗
17. Structural, mechanical and electronic properties of sodium based fluoroperovskites NaXF3 (X=Mg, Zn) from first-principle calculations10.1016/j.mssp.2015.01.040 ↗
18. First-principles calculations to investigate structural, electronic and optical properties of Na based fluoroperovskites NaXF3 (X= Sr, Zn)
19. Mechanical and opto-electronic properties of α-MoSi2: a DFT scheme with hydrostatic pressure10.1007/s12648-022-02355-7 ↗
20. Electronic structure, chemical bonding, and optical properties of paraelectric BaTiO310.1103/PhysRevB.62.8828 ↗
21. Systematic studies of the structural and optoelectronic characteristics of CaZn2X2 (X = N, P, As, Sb, Bi)10.1088/2053-1591/aaa1c4 ↗
22. First principles study of electronic structure dependent optical properties of oxychalcogenides BiOCuCh (Ch = S, Se, Te)10.1007/s12648-016-0928-4 ↗
23. A comprehensive DFT evaluation of catalytic and optoelectronic properties of BaTiO3 polymorphs10.1016/j.physb.2022.414418 ↗
24. Exploration of the structural, vibrational, electronic, mechanical and thermal properties of Ru4Al3B2 and Ru9Al3B8: a DFT study10.1039/D3RA05334B ↗
25. Structural polymorphism, electronic, and optical properties of NaSbS2: a computational approach toward eco-friendly and emerging semiconductor10.1016/j.rinp.2023.107192 ↗
26. Valleytronics of III–V solid solutions for thermoelectric application10.1039/C6RA28280F ↗
27. Genuine Dirac half-metals in two-dimensions10.1002/advs.202307297 ↗
28. Density functional theory estimate of halide perovskite band gap: when spin orbit coupling helps10.1021/acs.jpcc.1c09594 ↗
29. Band gaps of the solar perovskites photovoltaic CsXCl3 (X=Sn, Pb or Ge)10.1016/j.mssp.2020.105484 ↗
30. First principle study of cubic perovskites: AgTF3 (T=Mg, Zn)10.1016/j.physb.2011.09.026 ↗
31. First principle study of structural, electronic, optical and mechanical properties of cubic fluoro-perovskites: (CdXF3, X = Y, Bi)
32. First principle study of the structural, electronic, and Mechanical properties of cubic fluoroperovskites:(ZnXF3, X= Y, Bi)
33. First-principles investigation for some physical properties of some fluoroperovskites compounds ABF3 (A = K, Na; B = Mg, Zn)10.1007/s12648-017-1055-6 ↗
34. Pressure induced physical variations in the lead free fluoropervoskites XYF3 (X=K, Rb, Ag; Y=Zn, Sr, Mg): optical materials10.1016/j.optmat.2020.110325 ↗
35. Anisotropic elastic, opto-electronic and photocatalytic properties of BaTi2O5: first-principles calculations10.1016/j.mseb.2023.116658 ↗
36. Electronic and thermoelectric properties of few-layer transition metal dichalcogenides10.1063/1.4869142 ↗
37. DFT calculation for elastic constants of orthorhombic structure within WIEN2K code: a new package (ortho-elastic)10.1016/j.jallcom.2012.07.107 ↗
38. Crystal structures and elastic properties of superhard IrN2 and IrN3 from first principles
39. Effect of pressure variation on structural, elastic, mechanical, optoelectronic and thermodynamic properties of SrNaF 3 fluoroperovskite
40. Theoretical predictions of structure and related properties of intermetallics10.1179/mst.1992.8.4.345 ↗
41. Voigt · 1966
42. Berechnung der Fließgrenze von Mischkristallen auf Grund der Plastizitätsbedingung für Einkristalle10.1002/zamm.19290090104 ↗
43. The elastic behaviour of a crystalline aggregate10.1088/0370-1298/65/5/307 ↗
44. Elastic properties of reinforced solids: some theoretical principles10.1016/0022-5096(63)90036-X ↗
45. Elastic constants of cubic crystals10.1016/j.commatsci.2014.08.027 ↗
46. Electronic, mechanical, optical and photocatalytic properties of perovskite RbSr2Nb3O10 compound10.1016/j.jallcom.2021.159077 ↗
47. Hydrostatic pressure dependent structural, elastic, vibrational, electronic, and optoelectronic properties of superconducting BaCuO3: a DFT insight10.1016/j.jpcs.2021.110452 ↗
48. Pressure-induced elastic, electronic and optical properties of Ba(Mg1/3Nb2/3)O3 using first principles calculations10.1007/s12648-018-1160-1 ↗
49. Evaluation of thermal shock resistance for ceramic materials by Young's modulus10.4028/www.scientific.net/KEM.766.170 ↗
50. 1982
51. Elastic constants of the central force model for cubic structures: polycrystalline aggregates and instabilities10.1029/JB076i005p01349 ↗
52. XCII. Relations between the elastic moduli and the plastic properties of polycrystalline pure metals10.1080/14786440808520496 ↗
53. Generalization of intrinsic ductile-to-brittle criteria by Pugh and Pettifor for materials with a cubic crystal structure10.1038/s41598-021-83953-z ↗
54. Stainless steel optimization from quantum mechanical calculations10.1038/nmat790 ↗
55. Link between structural and mechanical stability of fcc- and bcc-based ordered Mg–Li alloys10.1016/j.intermet.2010.06.015 ↗
56. Theoretical investigation of the bonding and elastic properties of nanolayered ternary nitrides10.1103/PhysRevB.71.193402 ↗
57. Predicting structural, optoelectronic and mechanical properties of germanium based AGeF3 (A = Ga and In) halides perovskites using the DFT computational approach10.1007/s11082-023-04796-8 ↗
58. Modeling hardness of polycrystalline materials and bulk metallic glasses10.1016/j.intermet.2011.03.026 ↗
59. Microscopic theory of hardness and design of novel superhard crystals10.1016/j.ijrmhm.2012.02.021 ↗
60. Theoretical investigation on the transition-metal borides with Ta3B4-type structure: a class of hard and refractory materials10.1016/j.commatsci.2010.12.015 ↗
61. A model of hardness and fracture toughness of solids10.1063/1.5113622 ↗
62. Simple and accurate model of fracture toughness of solids10.1063/1.5066311 ↗
63. Schreiber · 1973
64. A simplified method for calculating the debye temperature from elastic constants10.1016/0022-3697(63)90067-2 ↗
65. Elastic constants versus melting temperature in metals10.1016/0036-9748(84)90267-9 ↗
66. Materials selection guidelines for low thermal conductivity thermal barrier coatings10.1016/S0257-8972(02)00593-5 ↗
67. Relation between the parameters of the elasticity theory and averaged bulk modulus of solids10.1134/S106378421111020X ↗
68. Effect of point defects on the thermal transport properties of (LaxGd1-x)2Zr2O7 : experiment and theoretical model10.1103/PhysRevB.74.144109 ↗
69. Insight of the role of F-impurity on the structural, electro-optical properties of ZnO: DFT and experiment10.1016/j.mssp.2022.107223 ↗
70. Optical properties of Ti3SiC2 and Ti4AlN310.1063/1.2938862 ↗
71. Structural, electronic, and optical properties of NiAl3: first-principles calculations10.1103/PhysRevB.74.014209 ↗
72. Demonstration of superluminal effects in an absorptionless, nonreflective system10.1103/PhysRevLett.91.143906 ↗
73. Origins of band-gap renormalization in degenerately doped semiconductors10.1103/PhysRevB.78.075211 ↗
74. First-principles calculations: structural stability, electronic structure, optical properties and thermodynamic properties of AlBN2, Al3BN4 and AlB3N4 nitrides10.1016/j.mssp.2023.107400 ↗
75. First-principles calculations of electronic structure, optical and thermodynamic properties of GaBN2, Ga3BN4 and GaB3N4 nitrides10.1016/j.vacuum.2022.111745 ↗
76. Structural stability, electronic and optical properties of Zr-Al-N ternary nitrides using the first-principles explorations
77. Theoretical predictions of the electronic, optical and thermodynamic properties of the C40-type TMSi2 (TM = V, Nb and Ta) disilicides
78. High-throughput computation of thermal conductivity of high-temperature solid phases: the case of oxide and fluoride perovskites
79. Acoustic and thermodynamic properties of cesium niobate under pressure and temperature: a DFT study10.1016/j.oceram.2024.100546 ↗
80. Acoustic-optical phonon up-conversion and hot-phonon bottleneck in lead-halide perovskites