journal article·2024-10

Harnessing halides: Comparative study of oxide fullerene modifications for sodium ion secondary battery efficiency

Naveen Kosar, Khurshid Ayub, Mazhar Amjad Gilani, Muhammad Arshad, Muhammad Imran, Tariq Mahmood

Publisher page

Abstract

The quest for secondary batteries drives ongoing research aimed at developing cost-effective and high-performance nanomaterials. While lithium-ion batteries initially offered high efficiency, however escalating demand has led to increased costs prompting exploration of other alternatives such as sodium (Na) ion batteries. Na resources are much more abundant and widely distributed globally compared to lithium. This study explores the potential of sodium ion battery by adopting a novel approach of incorporating endohedral halides into oxides fullerenes to enhance the voltage. We investigated the thermodynamic and electronic stabilities of Na/Na + ions with both bare and halide-doped magnesium oxides (Mg 12O 12 ) and zinc oxides (Zn 12O 12 ) fullerenes to understand how encapsulated halide affects the structural and electrochemical properties. The bare oxide fullerenes exhibit cell voltages of 0.29 and −0.50 V in the presence of toluene solvent. Upon incorporation of various halide ions into oxides fullerenes, we obtained cell voltage in acceptable range for anode materials. Specifically, the variation in free energy experiences a remarkable improvement where the Cl −@Zn 12O 12 in toluene has the most appropriate cell voltage of 1.09 V in the presence of toluene solvent, among all halides adsorbed oxides nanocages. These findings provide valuable insights for the design of novel low-cost nanomaterials having better cell voltage. The endeavor additionally catalyzes further research work into the design of halide-encapsulated oxide-fullerene-based secondary batteries, intended for widespread applications in electrochemical energy storage devices. This comprehensive work serves as a detailed blueprint for experimentalists, facilitating the synthesis of such systems to address the future challenges posed by energy scarcity.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Inorganic Chemistry and Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (74)

Show source-provided references
1. The implications of population growth and urbanization for climate change10.1177/0956247809344361 ↗
2. Development of environment friendly water-based self-rechargeable battery10.1016/j.renene.2021.03.082 ↗
3. Metallic particles‐induced surface reconstruction enabling highly durable zinc metal anode
4. Engineering an ultrathin and hydrophobic composite zinc anode with 24 μm thickness for high‐performance Zn batteries
5. A new family of halide electrolytes for all-solid-state lithium batteries10.1016/j.scib.2023.06.034 ↗
6. Advanced energy materials for flexible batteries in energy storage: a review10.1002/smm2.1007 ↗
7. A novel aluminum–graphite dual‐ion battery10.1002/aenm.201670064 ↗
8. Reversible calcium alloying enables a practical room-temperature rechargeable calcium-ion battery with a high discharge voltage10.1038/s41557-018-0045-4 ↗
9. PEO/Li 1.25 Al 0.25 Zr 1.75 (PO 4) 3 composite solid electrolytes for high-rate and ultra-stable all-solid-state lithium metal batteries with impregnated cathode modification10.1039/D3QI02407E ↗
10. Molecular grafting towards high-fraction active nanodots implanted in N-doped carbon for sodium dual-ion batteries10.1093/nsr/nwaa178 ↗
11. A sulfur-doped carbon-enhanced Na3V2(PO4)3 nanocomposite for sodium-ion storage10.1016/j.jpcs.2022.110746 ↗
12. Constructing one-dimensional mesoporous carbon nanofibers loaded with NaTi2(PO4)3 nanodots as novel anodes for sodium energy storage10.1016/j.jpcs.2021.110479 ↗
13. Lithium ion secondary batteries; past 10 years and the future10.1016/S0378-7753(01)00887-4 ↗
14. The development of lithium ion secondary batteries10.1002/tcr.1024 ↗
15. A review on battery market trends, second-life reuse, and recycling10.3390/suschem2010011 ↗
16. Beyond Li-ion: electrode materials for sodium- and magnesium-ion batteries10.1007/s40843-015-0084-8 ↗
17. Na 3 Zr 2 Si 2 PO 12 ceramic electrolytes for Na-ion battery: preparation using spray-drying method and its property10.15541/jim20210486 ↗
18. Towards K‐ion and Na‐ion batteries as “beyond Li‐ion,”10.1002/tcr.201700057 ↗
19. Na‐Ion batteries—approaching old and new challenges10.1002/aenm.202002055 ↗
20. On the challenge of developing advanced technologies for electrochemical energy storage and conversion10.1016/j.mattod.2014.02.014 ↗
21. Sodium-ion batteries: present and future10.1039/C6CS00776G ↗
22. Na-ion batteries, recent advances and present challenges to become low cost energy storage systems10.1039/c2ee02781j ↗
23. A review of carbon materials and their composites with alloy metals for sodium ion battery anodes10.1016/j.carbon.2015.09.091 ↗
24. Ab initio investigation of α- and ζ-V2O5 for beyond lithium ion battery cathodes10.1016/j.jpowsour.2020.228096 ↗
25. Potassium intercalation into graphite to realize high-voltage/high-power potassium-ion batteries and potassium-ion capacitors10.1016/j.elecom.2015.09.002 ↗
26. Sodium‐ion batteries10.1002/adfm.201200691 ↗
27. Nitrogen‐doped porous carbon nanofiber webs as anodes for lithium ion batteries with a superhigh capacity and rate capability10.1002/adma.201104634 ↗
28. New approach for enhancing electrical conductivity of electrodeposited Si-based anode material for Li secondary batteries: self-incorporation of nano Cu metal in Si–O–C composite10.1016/j.nanoen.2016.08.022 ↗
29. Biomass carbon micro/nano-structures derived from ramie fibers and corncobs as anode materials for lithium-ion and sodium-ion batteries10.1016/j.apsusc.2016.03.204 ↗
30. Nitrogen-doped carbon microspheres derived from oatmeal as high capacity and superior long life anode material for sodium ion battery10.1016/j.electacta.2016.01.105 ↗
31. Porous carbon nanocages encapsulated with tin nanoparticles for high performance sodium-ion batteries10.1016/j.ensm.2016.07.001 ↗
32. DFT studies on electrochemical properties of halide ions doped GDY-28 nanoflake for Na-ion battery applications10.1016/j.mssp.2022.106651 ↗
33. Carbon‐coated porous aluminum foil anode for high‐rate, long‐term cycling stability, and high energy density dual‐ion batteries10.1002/adma.201603735 ↗
34. A novel potassium‐ion‐based dual‐ion battery10.1002/adma.201700519 ↗
35. Electrochemical properties of lithium metal doped C60 fullerene for battery applications10.1016/j.mssp.2024.108256 ↗
36. Endohedral fullerenes10.1021/cr300297r ↗
37. Mechanistic enhanced cell voltage based on halides doped metal oxide fullerenes for use in Li-ion batteries: insights from DFT intuition
38. Ab initio characterization of layered MoS2 as anode for sodium-ion batteries10.1016/j.jpowsour.2014.06.049 ↗
39. Transition metal oxides for sodium-ion batteries10.1016/j.ensm.2016.06.005 ↗
40. Intercalation of sodium ions into hollow iron oxide nanoparticles10.1021/cm303611z ↗
41. Electrochemical intercalation and deintercalation of NaxMnO2 bronzes10.1016/0022-4596(85)90194-X ↗
42. Modeling of Ca12O12, Mg12O12, and Al12N12 nanostructured materials as sensors for phosgene (Cl2CO)
43. Density functional theory based molecular dynamics study on hydrogen storage capacity of C24, B12N12, Al12 N12, Be12O12, Mg12O12, and Zn12O12 nanocages10.1016/j.ijhydene.2019.12.106 ↗
44. The influence of alkali metals (Li, Na and K) interaction with Be12O12 and Mg12O12 nanoclusters on their structural, electronic and nonlinear optical properties: a theoretical study10.1016/j.synthmet.2015.03.008 ↗
45. Effect of metal atoms on the electronic properties of metal oxide nanoclusters for use in drug delivery applications: a density functional theory study10.1080/00268976.2019.1692150 ↗
46. Mg12O12 and Be12O12 nanocages as sorbents and sensors for H2S and SO2 gases: a theoretical approach10.3390/nano12101757 ↗
47. Increased osteoblast and decreased Staphylococcus epidermidis functions on nanophase ZnO and TiO 210.1002/jbm.a.30789 ↗
48. Review on zinc oxide nanoparticles: antibacterial activity and toxicity mechanism10.1007/s40820-015-0040-x ↗
49. Exchange functionals with improved long-range behavior and adiabatic connection methods without adjustable parameters: the mPW and mPW1PW models10.1063/1.475428 ↗
50. Performance of modern density functional theory for the prediction of hyperfine structure: meta-GGA and double hybrid functionals10.1080/00268970701604655 ↗
51. Progressive systematic underestimation of reaction energies by the B3LYP model as the number of C−C bonds increases: why organic chemists should use multiple DFT models for calculations involving polycarbon hydrocarbons10.1021/jo051545k ↗
52. Structural and electronic properties of semiconductor binary microclusters10.1103/PhysRevB.64.195312 ↗
53. Electronic structure of BN-aromatics: choice of reliable computational tools10.1063/1.4993297 ↗
54. Synthesis, crystal structures, computational studies and antimicrobial activity of new designed bis((5-aryl-1,3,4-oxadiazol-2-yl)thio)alkanes10.1016/j.molstruc.2017.11.011 ↗
55. High sensitivity of polypyrrole sensor for uric acid over urea, acetamide and sulfonamide: a density functional theory study10.1016/j.synthmet.2017.11.008 ↗
56. Sensor applications of polypyrrole for oxynitrogen analytes: a DFT study10.1007/s00894-018-3843-0 ↗
57. Frisch · 2009
58. Dennington · 2008
59. Doping superalkali on Zn12O12 nanocage constitutes a superior approach to fabricate stable and high-performance nonlinear optical materials10.1016/j.optlastec.2019.105753 ↗
60. Boosting the adsorption performance of BN nanosheet as an anode of Na-ion batteries: DFT studies10.1016/j.physleta.2017.04.022 ↗
61. Na-ion batteries based on the inorganic BN nanocluster anodes: DFT studies10.1016/j.jmgm.2017.03.001 ↗
62. Doping the alkali atom: an effective strategy to improve the electronic and nonlinear optical properties of the inorganic Al 12 N 12 nanocage10.1021/ic4022917 ↗
63. Band gap and stability in the ternary intermetallic compounds NiSn M (M =Ti,Zr,Hf): a first-principles study10.1103/PhysRevB.51.10443 ↗
64. Substituent effect on structure, stability, and aromaticity of novel B n N m C 20–(n + m) heterofullerenes10.1002/poc.3682 ↗
65. Adsorption of thiophene on the surfaces of X 12 Y 12 (X = Al, B, and Y = N,P) nanoclusters; A DFT study10.1016/j.molliq.2017.05.020 ↗
66. The conduction mechanism and thermoelectric phenomenon in layer crystals10.1088/0268-1242/12/9/007 ↗
67. Impact of cation–π interactions on the cell voltage of carbon nanotube-based Li batteries10.1039/C5NR06456B ↗
68. Reaction of C 60 2− with organic halides revisited in DMF: proton transfer from water to RC 60 − and unexpected formation of 1,2-dihydro[60]fullerenes10.1021/jo100430a ↗
69. On the importance of halogen–halogen interactions in the solid state of fullerene halides: a combined theoretical and crystallographic study10.3390/cryst7070191 ↗
70. A DFT study of halogen (F−, Cl−, and Br−) encapsulated Ga12X12 (X = N, P, and as) nanocages for sodium-ion batteries10.1007/s10904-022-02425-7 ↗
71. On the utility of C24 fullerene framework for Li-ion batteries: quantum chemical analysis10.1016/j.apsusc.2016.05.021 ↗
72. Electrochemical preparation and characterization of poly(1-amino-9,10-anthraquinone) films10.1016/S0013-4686(02)00054-3 ↗
73. Polarizable continuum model (PCM) calculations of solvent effects on optical rotations of chiral molecules10.1021/jp020124t ↗
74. Rechargeable lithium/sulfur battery with liquid electrolytes containing toluene as additive10.1016/j.jpowsour.2008.05.038 ↗