High-performance PbS detectors sensitized from one-step sensitization
Source abstract
Abstract
Two-step sensitization is the key technique for achieving high-performance uncooled lead-salt infrared photoconductive detectors fabricated from vapor physic deposition (VPD) method. However, the commercialization of these devices is inhibited by the intricate sensitization processes, especially the iodination step, which requires precise control over high concentrations of iodine vapor. Herein, a one-step sensitization technique was proposed to improve the reliability of lead sulfide (PbS) detectors manufactured from VPD method. Moreover, the dependence of the detectivity on sensitization parameters involving the oxygen concentration, time, and temperature, was established and interpreted based on extensive studies on the sensitization of lead salt devices. The feasibility of the simplified sensitization was demonstrated by a room-temperature peak detectivity of 2.47 × 10 10 cm Hz 1/2 W −1 at 2.7 μm attained at 430 °C for 10 min in 50 % oxygen ambient. The evolution of phase, microstructure and electrical properties confirms the enhanced performance results from the improvement in PbS crystal quality as well as the formation of Pb 3O 2I 2 and Pb 2(SO 4)O from high-temperature recrystallization. Therefore, the one-step sensitization paves a way for accelerating commercialization of lead-salt detectors fabricated by VPD technique.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Quantum Dots Synthesis And Properties · Advanced Semiconductor Detectors and Materials · Chalcogenide Semiconductor Thin Films
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (44)
Show source-provided references
1. Lead sulphide nanocrystal photodetector technologies10.1038/nphoton.2015.280 ↗
2. The development of lead salt detectors10.1119/1.1975646 ↗
3. Optimum utilization of lead sulfide infrared detectors under diverse operating conditions10.1364/AO.4.000665 ↗
4. Lead selenide polycrystalline coatings sensitized using diffusion and ion beam methods for uncooled mid-infrared photodetection10.3390/coatings8120444 ↗
5. Low-cost 320x240 lead salt focal plane array10.1117/12.439144 ↗
6. Potential and limitations for very-high-operating-temperature (VHOT) MWIR focal plane arrays using halogen-passivated PbSe
7. Low-cost PbSalt FPAs10.1117/12.544177 ↗
8. Recent development on the uncooled mid-infrared PbSe detectors with high detectivity
9. Fabrication and liquefied petroleum gas (LPG) sensing performance of p-polyaniline/n-PbS heterojunction at room temperature10.1016/j.snb.2011.04.005 ↗
10. Combined chemical–physical methods for enhancing IR photoconductive properties of PbS thin films10.1016/S1350-4495(02)00225-6 ↗
11. Room temperature nano- and microstructure photon detectors10.1016/j.mejo.2008.06.019 ↗
12. Film-type infrared photoconductors10.1109/JRPROC.1959.287039 ↗
13. Structural and optical characterization of chemically deposited PbS thin films10.1007/s12633-015-9399-z ↗
14. Tuning the synthesis of ternary lead chalcogenide quantum dots by balancing precursor reactivity10.1021/nn102878u ↗
15. Photovoltaic devices employing ternary PbSxSe1-x nanocrystals10.1021/nl900388a ↗
16. The optical properties of PbS and PbS/Ag thin films10.15251/CL.2021.1812.759 ↗
17. Influence of gamma irradiation on the properties of PbS thin films
18. Formation of patterned PbS and ZnS films on self-assembled monolayers10.1016/S0040-6090(99)00044-9 ↗
19. Photoelectrochemical activities of ultrathin lead sulfide films prepared by electrochemical atomic layer epitaxy10.1016/S0022-0728(01)00753-7 ↗
20. Infrared detectors: status and trends10.1016/S0079-6727(02)00024-1 ↗
21. Atomic layer deposition of PbS thin films at low temperatures10.1021/acs.chemmater.0c01887 ↗
22. Colloidal quantum dot photodetectors with 10-ns response time and 80% quantum efficiency at 1,550 nm10.1016/j.matt.2020.12.017 ↗
23. Hot-carrier infrared detection in PbS with ultrafast and highly sensitive responses10.1063/5.0078394 ↗
24. Rogalski · 2002 · 5
25. Improving infrared photodetection performance by ultraviolet-ozone treatment in lead sulfide films10.1021/acsaom.2c00165 ↗
26. Effect of annealing atmosphere on structure and properties in chemically deposited PbS thin films
27. PbS thin films prepared by chemical bath deposition: effects of concentration on the morphology, structure and optical properties, Iran10.1007/s40995-019-00698-1 ↗
28. Two-step chemical bath deposition enhanced mobility of PbS thin films10.1016/j.mssp.2021.106147 ↗
29. Modified vapor phase deposition technology for high-performance uncooled MIR PbSe detectors10.1039/D1RA06144E ↗
30. The structural, morphological, and optical study of chemical bath deposition and a spin coating deposited mackinawite FeS thin films10.1007/s00339-022-05975-2 ↗
31. What Are The Advantages Of Vapor Phase Deposition?, Kindle-Tech.com. (n.d.). https://kindle-tech.com/faqs/what-are-the-advantages-of-vapor-phase-deposition/(accessed January 3, 2024).
32. Low pressure organic vapor phase deposition of small molecular weight organic light emitting device structures10.1063/1.120281 ↗
33. Controlled growth of a molecular bulk heterojunction photovoltaic cell10.1038/nmat1285 ↗
34. Organic vapor phase deposition for the growth of large area organic electronic devices10.1063/1.3271797 ↗
35. Indirect photon interaction in PbS photodetectors10.1016/S0169-4332(96)00394-7 ↗
36. Influence of oxidation on the transport properties of IV–VI-thin films10.1016/S1386-9477(02)00819-6 ↗
37. Study of sensitization process on mid-infrared uncooled PbSe photoconductive detectors leads to high detectivity10.1063/1.4794492 ↗
38. Evidences of sensitization mechanism for PbSe thin films photoconductor10.1016/j.vacuum.2017.12.017 ↗
39. Lead selenide thin films and uncooled midinfrared detectors by vapor phase deposition10.1021/acs.jpclett.2c03418 ↗
40. Wafer-scale high-detectivity near-infrared PbS detectors fabricated from vapor phase deposition10.1021/acs.jpcc.3c01489 ↗
41. PbSe mid-IR photoconductive thin films (part I): phase analysis of the functional layer10.1016/j.jallcom.2017.06.330 ↗
42. PbI2 3D network transporting model for the charge separation mechanism of PbSe detectors10.1039/D1RA06005H ↗
43. Tunability of 1/f noise at multiple Dirac cones in hBN encapsulated graphene devices10.1021/acs.nanolett.5b04116 ↗
44. Use of lead sulphide cells in infra-red spectroscopy10.1038/158873a0 ↗