Stoichiometry ratio-induced structural and electronic properties changes of TaN thin films prepared by reactive magnetron sputtering
Source abstract
Abstract
Tantalum nitride (TaN) is a representative compound with a variety of compositions and mesoscopic phases, which ultimately leads to a diversity of properties. In order to explore relationship between the stoichiometry and properties, in this work, TaN thin films were prepared by reactive sputtering and modulated by controlling the percentage of nitrogen (P N2 ). All the prepared films were dense and uniform, which exhibited a δ-TaN phase structure. The decrease of nitrogen vacancies directly caused the slightly shift of XRD diffraction peaks and the increase in grain size, both of which showed a lattice distortion of the films. It is also found that the presence of nitrogen vacancies affectes the distribution of the Ta cation as well as the nitrogen-tantalum stoichiometry ratios, so that the deficient material exhibits different electrical properties. The TCR of TaN in this work achieved as low as 32.9 ppm/°C (nitrogen-tantalum ratio of 0.843), which is attributed to the nitrogen vacancies in TaN lattice effectively regulating the electron scattering in the vicinity of Ta atoms. Meanwhile, the change in resistivity is only 1 %, indicating a good long-term stability of TaN. This study provides a point of reference for the preparation of film resistors from the perspective of material modulation.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metal and Thin Film Mechanics · Semiconductor materials and devices · ZnO doping and properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (36)
Show source-provided references
1. Study of Ni-Cr/CrN bilayer thin films resistor prepared by magnetron sputtering10.1016/j.vacuum.2023.112085 ↗
2. Mechanical and electrical properties of NbMoTaW refractory high-entropy alloy thin films10.1016/j.ijrmhm.2019.02.005 ↗
3. Fabrication and tribological behavior of sputtering TaN coatings10.1016/j.surfcoat.2014.03.024 ↗
4. Effect of TaN intermediate layer on the back contact reaction of sputter-deposited Cu poor Cu2ZnSnS4 and Mo10.1016/j.apsusc.2018.11.227 ↗
5. Microstructure, mechanical and tribological performance of nanostructured TiAlTaN-(TiAlN/TaN)(n) coatings: understanding the effect of quaternary/multilayer volume fraction
6. Surface characterization and electrochemical properties of tantalum nitride (TaN) nanostructured coatings produced by reactive DC magnetron sputtering
7. A low-stress microactuator array with integrated thin-film resistors10.1109/LPT.2014.2363409 ↗
8. Superconductivity in topological semimetal theta-TaN at high pressure, Chin
9. Enhanced spatial charge separation in a niobium and tantalum nitride core-shell photoanode: in situ interface bonding for efficient solar water splitting
10. Effect of nitrogen flow ratio on degradation behaviors and failure of magnetron sputter deposited tantalum nitride10.3390/coatings11091133 ↗
11. Influence of nitrogen concentration on electrical, mechanical, and structural properties of tantalum nitride thin films prepared via DC magnetron sputtering10.1007/s00339-022-05501-4 ↗
12. Influences of aluminum doping on the microstructures and electrical properties of tantalum nitride thin films before and after annealing10.1016/j.vacuum.2021.110791 ↗
13. Low stress TaN thin film development for MEMS/Sensor electrode application10.1142/S0218126613400173 ↗
14. Evaluation of residual stress in sputtered tantalum thin-film10.1016/j.apsusc.2016.02.236 ↗
15. Effect of nitrogen flow ratio on nano-mechanical properties of tantalum nitride thin film10.1016/j.jallcom.2017.05.159 ↗
16. Identification and roles of nonstoichiometric oxygen in amorphous Ta2O5 thin films deposited by electron beam and sputtering processes10.1016/j.apsusc.2016.04.099 ↗
17. Thermally-induced phase transformation sequence of arc evaporated Ta-Al-N coatings10.1016/j.scriptamat.2015.09.040 ↗
18. Phase map, composition and resistivity of reactively magnetron sputtered and annealed Ta-N films10.1088/0022-3727/49/19/195301 ↗
19. Synthesis, electron transport properties of transition metal nitrides and applications10.1016/j.pmatsci.2014.11.004 ↗
20. Conductive nitrides: growth principles, optical and electronic properties, and their perspectives in photonics and plasmonics10.1016/j.mser.2017.11.001 ↗
21. Thermodynamic routes to novel metastable nitrogen-rich nitrides10.1021/acs.chemmater.7b02399 ↗
22. High-pressure synthesis and compressive behavior of tantalum nitrides10.1063/1.4867986 ↗
23. High-pressure synthesis and thermal conductivity of semimetallic theta-tantalum nitride10.1002/adfm.202212957 ↗
24. A promising application of optical hexagonal TaN in photocatalytic reactions10.1002/anie.201810886 ↗
25. Phase stability and mechanical response of tantalum nitrides to electronic excitation effect10.1088/2053-1591/ab95d5 ↗
26. Mechanical and Tribological Properties of Ta-N and Ta-Al-N coatings deposited by reactive high power impulse magnetron sputtering10.3390/ma15093354 ↗
27. Combined experimental and theoretical assessments of the lattice dynamics and optoelectronics of TaON and Ta3N510.1016/j.jssc.2015.06.029 ↗
28. Formation and characterization of gray Ta2O5 and its enhanced photocatalytic hydrogen generation activity10.1016/j.ijhydene.2020.04.154 ↗
29. X-ray photoelectron spectroscopy: towards reliable binding energy referencing10.1016/j.pmatsci.2019.100591 ↗
30. Direct measurement of the nitrogen content by XPS in self-passivated TaNx thin films10.1002/sia.2919 ↗
31. Tantalum nitride electron-selective contact for crystalline silicon solar cells10.1002/aenm.201800608 ↗
32. Effects of nitrogen composition on the resistivity of reactively sputtered TaN thin films10.1002/sia.5691 ↗
33. Effect of texture on wear resistance of tantalum nitride film10.1016/j.triboint.2019.01.001 ↗
34. Mechanisms of low-temperature nitridation technology on a TaN thin film resistor for temperature sensor applications10.1186/s11671-016-1480-z ↗
35. Degradation behaviors and failure of magnetron sputter deposited tantalum nitride10.1016/j.tsf.2020.137821 ↗
36. Reliability and characteristics of magnetron sputter deposited tantalum nitride for thin film resistors10.1016/j.tsf.2018.04.016 ↗