journal article·2023-06

Indium tin oxide etch characteristics using CxH2x+2(x=1,2,3)/Ar

Jong Woo Hong, Hyun Min Cho, Yu Gwang Jeong, Da Woon Jung, Yun Jong Yeo, Ji Eun Kang, Hee Ju Kim, Hyun Woo Tak, Geun Young Yeom, Dong Woo Kim

Publisher page

Abstract

For the next generation display devices, dry etching technique for indium tin oxide (ITO) used as a transparent electrode is required to obtain a highly anisotropic etch profile, and to decrease the dimensional loss after the etching. For the dry etching of ITO, the easy dry cleaning of etch byproducts attached to the chamber wall during the dry etching is also important. In this study, by using novel hydrocarbon gases mixed with Ar, such as ethane (C 2H 6) and propane (C 3H 8), the dry etch characteristics and the etch residue cleaning process have been investigated using an inductively coupled plasma etcher, and the results were compared with the conventionally investigated methane (CH 4)-based gases, such as CH 4 and CH 4/H 2 mixed with Ar. The result showed that the hydrogen in CH 4/H 2 both decreased the ITO etch rate, and decreased the etch selectivity over photoresist (PR). By using hydrogen-less hydrocarbon gas having the alkane structure, such as C xH 2x+2 (x = 2, 3), both the ITO etch rate and the etch selectivity were increased with the increase of carbon in the alkane structure; therefore, the highest etch rate was observed for C 3H 8. In addition, with the increase of x in the carbon of C xH 2x+2 , less dimensional loss, more anisotropic etch profile, and lower surface roughness could be observed. During the etching, etch residues containing C, In, Sn, O, and H were accumulated on the chamber wall due to the low volatility of the etch byproducts; however, the etch residues formed by all three hydrocarbon gases could be successfully dry cleaned using H 2/Ar plasmas through the formation of InC xH y(x < y), CO x, and S nH x.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: ZnO doping and properties · Plasma Diagnostics and Applications · Semiconductor materials and devices

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (25)

Show source-provided references
1. Room temperature deposition of very thin and flexible crystalline ITO thin film using 3-D facing-magnetron sputtering plasma source10.1016/j.vacuum.2021.110520 ↗
2. Improved electrical and optical properties of ultra-thin tin doped indium oxide (ITO) thin films by a 3-dimensionally confined magnetron sputtering source10.1166/sam.2021.4020 ↗
3. Ghandour · 2002
4. Enhancement of the light output of GaN-based light-emitting diodes with surface-patterned ITO electrodes by maskless wet-etching10.1016/j.sse.2007.02.038 ↗
5. Outcoupling enhancement of OLEDs with a randomly distributed ITO pattern fabricated by maskless wet etching method10.1109/JDT.2013.2265696 ↗
6. Wet etching mechanisms of ITO films in oxalic acid10.1016/j.mee.2005.12.003 ↗
7. The effect of solvent on the etching of ITO electrode10.1016/j.matchemphys.2003.11.021 ↗
8. A study on electric properties for pulse laser annealing of ITO film after wet etching
9. Organic acid mixing to improve ITO film etching in flat panel display manufacturing10.1149/1.2135221 ↗
10. Lee · 2001
11. Park · 2000
12. Park · 2000
13. A study on the Cl 2/C 2 H 4/Ar plasma etching of ITO using inductively coupled plasma
14. Dry etching of ITO thin films by the addition of gases in Cl 2/BCl 3 inductivity coupled plasma10.4313/TEEM.2012.13.3.157 ↗
15. One-step etching characteristics of ito/ag/ito multilayered electrode in high-density and high-electron-temperature plasma10.3390/ma14082025 ↗
16. Infinitely high etch selectivity during CH4/H2/Ar inductively coupled plasma (ICP) etching of indium tin oxide (ITO) with photoresist mask10.1016/j.tsf.2007.08.021 ↗
17. Damage recovery and low-damage etching of ITO in H2/CO plasma: effects of hydrogen or oxygen10.1002/ppap.201900029 ↗
18. Effects of hydrogen-damaged layer on tin-doped indium oxide etching by H2/Ar plasma
19. Etching selectivity of indium tin oxide to photoresist in high density chlorine- and ethylene-containing plasmas
20. New chamber walls conditioning and cleaning strategies to improve the stability of plasma processes10.1088/0963-0252/14/3/025 ↗
21. Removal of self-assembled monolayers of alkanethiolates on gold by plasma cleaning10.1016/j.susc.2005.07.038 ↗
22. Petasch · 1997
23. Characterization of a-C:H:N deposition from CH4/N2 rf plasmas using optical emission spectroscopy10.1063/1.361439 ↗
24. Influence of ionic liquid and ionic salt on protein against the reactive species generated using dielectric barrier discharge plasma10.1038/srep17781 ↗
25. Effect of hydrofluorocarbon structure of C3H2F6 isomers on high aspect ratio etching of silicon oxide10.1016/j.apsusc.2022.154050 ↗