Exploring the effect of oxygen environment on the Mo/CdTe/CdSe solar cell substrate configuration
Source abstract
Abstract
Incorporating Se element into Cadmium telluride (CdTe)-based superstrate configuration solar cells have advanced impressively. However, molybdenum (Mo)/CdTe/CdSe substrate configuration devices remain relatively unexplored, and Mo foil oxidation behavior during the fabrication process is kept in the dark. This work investigates a fresh CdTe/CdSe substrate configuration solar cell using Mo substrates. Mo/CdTe/CdSe/ZnO/AZO/ITO solar cells have been fabricated, CdTe absorber layer was obtained by closed space sublimation (CSS) under ∼2000 pa pressure in varying Ar/O 2 flu ratio. The champion device had an efficiency of 3.87% with unintentional Cu-doping and back contact. X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD), scanning electron microscopy (SEM), and energy-dispersive X-Ray spectroscopy (EDS) were applied to study the properties of CdTe films. Before CdTe deposition, molybdenum oxide (MoO x ) was generated while heating the Mo substrate in an oxygen-containing environment. This buffer layer plays a pivotal role in blocking non-Ohmic back contact analyzed by current-voltage-temperature (J-V-T) measurements. Molybdenum oxidation states were extensively studied to build the relationship with a solar cell device. Our findings indicated that different oxygen partial pressure had less relevance with the CdTe surface chemical environment but was incredibly relevant for Mo metal foil oxidation states.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Semiconductor materials and interfaces
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (51)
Show source-provided references
1. Understanding the role of selenium in defect passivation for highly efficient selenium-alloyed cadmium telluride solar cells10.1038/s41560-019-0389-z ↗
2. Understanding what limits the voltage of polycrystalline CdSeTe solar cells10.1038/s41560-022-00985-z ↗
3. Exploration of CdMnTe thin film solar cells10.1016/j.solener.2019.03.052 ↗
4. Towards CdZnTe solar cells: an evolution to post-treatment annealing atmosphere10.1016/j.solener.2018.09.025 ↗
5. Solar cell efficiency tables (version 59)10.1002/pip.3506 ↗
6. CdTe‐Based solar cells with variations in Mg concentration in the MgZnO emitter10.1002/solr.202100126 ↗
7. Low-temperature and effective ex situ group V doping for efficient polycrystalline CdSeTe solar cells10.1038/s41560-021-00848-z ↗
8. Effect of ultra-thin CdSexTe1−x interface layer on parameters of CdTe solar cells10.1016/j.solener.2022.01.073 ↗
9. Selenium passivates grain boundaries in alloyed CdTe solar cells10.1016/j.solmat.2022.111595 ↗
10. Mechanisms for long carrier lifetime in Cd(Se)Te double heterostructures10.1063/5.0047976 ↗
11. Exceeding 200 ns lifetimes in polycrystalline CdTe solar cells10.1002/solr.202100173 ↗
12. Design issues in the fabrication of CdS–CdTe solar cells on molybdenum foil substrates10.1016/S0927-0248(02)00289-1 ↗
13. Growth and characterization of CdTe by close spaced sublimation on metal substrates10.1016/S0927-0248(99)00029-X ↗
14. Effects of Cu doping on CdTe thin-film solar cells in substrate configuration10.7567/1347-4065/aafe62 ↗
15. Influence of the Au interlayer on the contact resistance and morphology of CdTe films deposited on molybdenum substrate10.1016/j.solmat.2006.03.002 ↗
16. Challenges and prospects for developing CdS/CdTe substrate solar cells on Mo foils10.1016/j.solmat.2014.01.017 ↗
17. Past, present and future of the thin film CdTe/CdS solar cells10.1016/j.solener.2018.01.018 ↗
18. Doping of polycrystalline CdTe for high-efficiency solar cells on flexible metal foil10.1038/ncomms3306 ↗
19. Substrate configuration, bifacial CdTe solar cells grown directly on transparent single wall carbon nanotube back contacts10.1016/j.solmat.2016.05.001 ↗
20. Low substrate temperature CdTe solar cells: a review10.1016/j.solener.2018.02.038 ↗
21. Development of MoOx thin films as back contact buffer for CdTe solar cells in substrate configuration10.1016/j.tsf.2012.11.110 ↗
22. Thin film CdTe-CdS heterojunction solar cells on lightweight metal substrates10.1016/S0927-0248(99)00039-2 ↗
23. Oxidation-resistant environmental barrier coatings for Mo-based alloys: a review10.1002/adem.202001016 ↗
24. Microstructure and oxidation behavior of anti-oxidation coatings on Mo-based alloys through HAPC process: a review10.3390/coatings11080883 ↗
25. MoOx (x <= 2) ultrathin film growth from reactions between metallic molybdenum and TiO2 surfaces10.1016/S0169-4332(01)00092-7 ↗
26. Superficial oxidation of molybdenum at high-pressure and low-temperature - rheed and AES analyses of the molybdenum oxide formation10.1016/0039-6028(91)91148-Q ↗
27. Interface modification to enhance electron extraction by deposition of a ZnMgO buffer on SnO2-coated FTO in CdTe solar cells10.1016/j.solener.2018.11.053 ↗
28. Application of bromide-iodide lead perovskite thin film as a copper-free back contact layer for CdTe solar cells10.1016/j.solener.2021.11.005 ↗
29. High carrier mobility tungsten-doped indium oxide films prepared by reactive plasma deposition in pure argon and post annealing10.1016/j.mssp.2021.106257 ↗
30. Characterization of sputtered CdSe thin films as the window layer for CdTe solar cells10.1016/j.mssp.2018.04.022 ↗
31. Controlled synthesis of nanostructured molybdenum oxide electrodes for high performance supercapacitor devices10.1016/j.apsusc.2017.04.094 ↗
32. Suppression of pinhole defects in thin film CdS/CdTe solar cell via gelatin-based negative photoresist passivation10.1016/j.mssp.2022.106817 ↗
33. Cadmium telluride (CdTe) and cadmium selenide (CdSe) leaching behavior and surface chemistry in response to pH and O210.1016/j.jenvman.2015.02.033 ↗
34. Generalized molybdenum oxide surface chemical state XPS determination via informed amorphous sample model10.1016/j.apsusc.2014.11.077 ↗
35. Synthesis and electrochromic properties of molybdenum oxide films10.1016/j.surfcoat.2018.12.028 ↗
36. Non-reactive dc magnetron sputter deposition of Mo-O thin films from ceramic MoOx targets10.1016/j.surfcoat.2017.07.083 ↗
37. Oxygen interaction with MO(100) studied by XPS, AES and eels10.1002/sia.740120704 ↗
38. Promising graphitic carbon nitride/MoOx nanocomposites: for surface protective performance of AA2024 alloys in marine environment10.1016/j.surfcoat.2019.06.004 ↗
39. Industrial-scale sputter deposition of molybdenum oxide thin films: Microstructure evolution and properties10.1116/1.4973214 ↗
40. Electrical contacts for II–VI semiconducting devices10.1016/j.mee.2009.03.040 ↗
41. Chapter II - applications
42. Metal–semiconductor contacts
43. Metal–semiconductor contacts10.1063/1.2995556 ↗
44. Koishiyev · 2008 · 1
45. The mechanism of J-V “roll-over” in CdS/CdTe devices
46. Effect of back-contact barrier on thin-film CdTe solar cells10.1016/j.tsf.2006.01.004 ↗
47. Nucleation of CdTe thin films deposited by close-space sublimation under a nitrogen ambient10.1016/j.tsf.2006.12.169 ↗
48. Interface phenomena between CdTe and ZnTe:Cu back contact10.1016/j.solener.2018.10.035 ↗
49. Wet chemical etching of cadmium telluride photovoltaics for enhanced open-circuit voltage, fill factor, and power conversion efficiency10.1557/jmr.2019.363 ↗
50. Design of a highly efficient CdTe-based dual-heterojunction solar cell with 44% predicted efficiency10.1016/j.solener.2021.04.062 ↗
51. Simulation of graded bandgap on backwall superstrate CIGS solar cells with MoOx electron reflection layer10.1088/2053-1591/ab4c5c ↗